All Commands
From Macros Wiki
| Command | Version Number |
| ABS <n> | 9, 0, 0 |
| ACOS <n> | 9, 0, 0 |
| ADD_LINE_PART_COMMENT <text> | 12, 0, 28 |
| ADD_LINE_PROG_NOTES <text> | 12, 0, 28 |
| ADD_OP_CRC_MARKER <op number> <feature num> <param> <value> <type> <marker num> | 9, 3, 2 |
| ADD_OP_DWELL_MARKER <op number> <feature num> <param> <value> <sec/rev> <marker num> | 9, 3, 2 |
| ADD_OP_FEED_MARKER <op number> <feature num> <param> <value> <type> <marker num> | 9, 3, 2 |
| ADD_OP_MARKER <op number> <marker type> <feature num> <param> <value> <marker number> | 9, 5, 14 |
| ADD_OP_OFFSET_MARKER <op number> <feature num> <param> <value> <tool/explicit> <marker num> | 9, 3, 2 |
| ADD_OP_PATH_ARC <xe> <ye> <ze> <xc> <yc> <zx> <rad> <dir> | 9, 5, 9 |
| ADD_OP_PATH_CTOOL <type> <x> <y> <z> | 9, 5, 9 |
| ADD_OP_PATH_LINE <xs> <ys> <zs> | 9, 5, 9 |
| ADD_OP_PATH_POINT <x> <y> <z> | 9, 5, 9 |
| ADD_OP_PATH_RAPID <xe> <ye> <ze> | 9, 5, 9 |
| ADD_OP_PATH_SELGEO | 14, 0, 25 |
| ADD_OP_PATH_THREAD <xe> <ye> <ze> | 9, 5, 9 |
| ADD_OP_SPEED_MARKER <op number> <feature num> <param> <value> <fwd/rev> <marker num> | 9, 3, 2 |
| ADD_OP_STOP_MARKER <op number> <feature num> <param> <value> <marker num> | 9, 3, 2 |
| ADD_OP_TEXT_MARKER <op number> <feature num> <param> <string> <marker num> | 9, 3, 2 |
| ADD_PATH_ARC <path number> <xe> <ye> <ze> <xc> <yc> <zx> <rad> <dir> | 9, 5, 14 |
| ADD_PATH_CTOOL <path number> <type> <x> <y> <z> | 9, 5, 14 |
| ADD_PATH_FEAT <path number> <x> <y> <z> | 9, 5, 14 |
| ADD_PATH_LINE <path number> <xe> <ye> <ze> | 9, 5, 14 |
| ADD_PATH_POINT <path number> <x> <y> <z> | 9, 5, 14 |
| ADD_PATH_RAPID <path number> <xe> <ye> <ze> | 9, 5, 14 |
| ADD_PATH_THREAD <path number> <xe> <ye> <ze> | 9, 5, 14 |
| ANGLE_LINE <x> <y> | 9, 0, 0 |
| ARC <xc> <yc> <xe> <ye> [<ze>] <CW/CCW> | 9, 0, 0 |
| ARGS <var name>, <var name>, <var name> (max 50 variables) | 9, 0, 0 |
| ASC <a$> | 9, 0, 0 |
| ASIN <n> | 9, 0, 0 |
| ATAN <n> | 9, 0, 0 |
| AUTO_CS <use face origin> <number of new CSs created> [<array:list of new CSs>] | 11, 0, 1 |
| BUTTON <left> <top> <width> <height> <caption> <variable> | 9, 0, 0 |
| CALC_PROCESS | 9, 0, 0 |
| CALL <macro name> [<arg 1>, <arg2>, <arg3> (max 10 arguments)] | 9, 0, 0 |
| CANCEL <left> <top> <width> <height> | 9, 0, 0 |
| CHECK <left> <top> <width> <height> <text> <variable> [<default>] | 9, 0, 0 |
| CHECK | 9, 0, 0 |
| CHR$ <n> | 9, 0, 0 |
| CIRCLE <xc> <yc> <rad> | 9, 0, 0 |
| CIRCLE_2CR <circle number> <circle> <circle> <radius> <option> | 9, 0, 0 |
| CIRCLE_2LR <circle number> <line> <line> <radius> <option> | 9, 0, 0 |
| CIRCLE_2P <circle number> <point> <point> | 9, 0, 0 |
| CIRCLE_2PR <circle number> <point> <point> <radius> <option> | 9, 0, 0 |
| CIRCLE_3P <circle number> <point> <point> <point> | 9, 0, 0 |
| CIRCLE_COPY <circle number> <new circle number> | 9, 0, 0 |
| CIRCLE_CP <circle number> <point> <point> | 9, 0, 0 |
| CIRCLE_CR <circle number> <point> <radius> | 9, 0, 0 |
| CIRCLE_GET_DATA <circle number> <xc> <yc> <radius> | 9, 0, 0 |
| CIRCLE_LCR <circle number> <line> <circle> <radius> <option> | 9, 0, 0 |
| CIRCLE_MIRROR <circle number> <axis> <axis value> | 9, 0, 0 |
| CIRCLE_PC <circle number> <point> <circle> | 9, 0, 0 |
| CIRCLE_PCR <circle number> <point> <circle> <radius> <option> | 9, 0, 0 |
| CIRCLE_PL <circle number> <point> <line> <option> | 9, 0, 0 |
| CIRCLE_PLR <circle number> <point> <line> <radius> <option> | 9, 0, 0 |
| CIRCLE_ROTATE <circle number> <xc> <yc> <angle> | 9, 0, 0 |
| CIRCLE_TRANSLATE <circle number> <dx> <dy> | 9, 0, 0 |
| CLEAR_OP_PATH | 9, 5, 9 |
| CLEAR_PART_COMMENT | 12, 0, 28 |
| CLEAR_PATH <path number> | 9, 5, 14 |
| CLEAR_PROCESS_LIST | 9, 0, 0 |
| CLEAR_PROG_NOTES | 12, 0, 28 |
| CLIPBOARD <CUT/COPY/PASTE> | 9, 5, 16 |
| CLOSE_BODY_BAG (no arguments) | 9, 9, 19 |
| CLOSE_PART <force close> <save file> | 9, 5, 16 |
| CLOSE_POST_DIALOG | 14, 0, 28 |
| COMBINE_SHAPES <method> [<keep existing shapes>] | 10, 8, 97 |
| CONTINUE | 9, 0, 0 |
| CONTOUR | 9, 0, 0 |
| CONTOUR_3D | 9, 0, 0 |
| COPY_OP_COMMENT_TO_PROC [<from op>] | 14, 0, 37 |
| COPY_PATH <source path number> <new path number> | 9, 5, 14 |
| COPY_PROCESS <from process number> <to process number> | 9, 5, 7 |
| COPY_SOLID <solid number> <new solid number> | 9, 5, 9 |
| COS <n> | 9, 0, 0 |
| CREATE_CHAMFER <geo ref> <type> <radius> | 9, 0, 0 |
| CREATE_CIRCLE <circle number> | 9, 0, 0 |
| CREATE_ENGRAVE_TEXT <text> | 10, 8, 96 |
| CREATE_FEATURE <feature name> <red> <green> <blue> [<feature id>] | 11,8,37 |
| CREATE_FILLET <geo ref> <radius> | 9, 0, 0 |
| CREATE_LATHE_TOOL <tool number> | 9, 0, 0 |
| CREATE_LINE <line number> | 9, 0, 0 |
| CREATE_MILL_TOOL <tool number> | 9, 0, 0 |
| CREATE_OP_PATH_TYPE <type> | 14, 0, 25 |
| CREATE_PATH <path number> <xs> <ys> <zs> | 9, 5, 14 |
| CREATE_POINT <point number>, <x>, <y> | 9, 0, 0 |
| CREATE_PROCESS <process_type> <process number> <tool number> | 9, 0, 0 |
| DEBUG | 9, 5, 9 |
| DEFINE_PATH_LIST <number of paths> | 9, 5, 14 |
| DELETE_ALL_OP_MARKERS <op number> | 9, 3, 2 |
| DELETE_CS <cs number> | 9, 5, 7 |
| DELETE_GEO <geo ref> | 9, 0, 0 |
| DELETE_OP <op number> | 9, 5, 7 |
| DELETE_OP_MARKER <op number> <marker num> | 9, 3, 2 |
| DELETE_PATH_LIST | 9, 5, 14 |
| DELETE_PROCESS <process number> | 9, 0, 0 |
| DELETE_SHAPE <geo ref> | 9, 0, 0 |
| DELETE_SOLID <solid number> | 9, 0, 0 |
| DELETE_TOOL <tool number> | 9, 0, 0 |
| DELETE_WG <wg number> | 9, 5, 7 |
| DESELECT_ALL_GEO | 9, 0, 0 |
| DESELECT_ALL_OPS | 9, 0, 0 |
| DESELECT_ALL_PROCS | 9, 0, 0 |
| DESELECT_ALL_SOLIDS | 9, 0, 0 |
| DESELECT_ALL_TOOLS | 9, 0, 0 |
| DESELECT_GEO <geo ref> | 9, 0, 0 |
| DESELECT_OP <op number> | 9, 0, 0 |
| DESELECT_PROC <process number> | 9, 0, 0 |
| DESELECT_SHAPE <shape ref> | 9, 8, 16 |
| DESELECT_SOLID <solid number> | 9, 0, 0 |
| DESELECT_TOOL <tool number> | 9, 0, 0 |
| DIALOG <dialog filename> [<modal>] | 9, 0, 0 |
| DIALOG <caption> <left> <top> <width> <height> | 9, 0, 0 |
| DROPDOWN_ADD <dropdown number> <caption> <value> | 9, 0, 0 |
| DROPDOWN_EXCEL <dropdown number> <excel range number> | 9, 0, 0 |
| DROPDOWN_NEW <left> <top> <width> <height> <variable> | 9, 0, 0 |
| DROPDOWN_VAL <dropdown number> <initial value> | 9, 0, 0 |
| DUMP_VARIABLES <filename> | 9, 0, 0 |
| ESC_TEXT <replace escape sequences> | 9, 9, 38 |
| EVAL_TEXT <string variable> | 9, 0, 0 |
| EXCEL_CLOSE | 9, 0, 0 |
| EXCEL_FIND_CELL <row 1> <col 1> <row 2> <col 2> <cell text> <row> <col> | 9, 0, 0 |
| EXCEL_GET_CELL <row> <col> <contents> | 9, 0, 0 |
| EXCEL_GET_RANGE <range number> <row 1> <col 1> <row 2> <col 2> | 9, 0, 0 |
| EXCEL_OPEN <filename> | 9, 0, 0 |
| EXCEL_SAVE | 9, 5, 14 |
| EXCEL_SELECT_SHEET <sheet name> | 9, 0, 0 |
| EXCEL_SET_CELL <row> <col> <value> | 9, 0, 0 |
| EXIT_GIBBSCAM | 9, 4, 24 |
| EXPLODE_SOLID <solid number> <num solids> <array:list of solids> | 9, 5, 9 |
| EXPORT_DXF <filename> | 9, 0, 0 |
| EXPORT_OPTION <parameter> <value> | 9, 0, 0 |
| EXPORT_PARASOLID <filename> [<version>] | 9, 0, 0 |
| EXPORT_SOLIDWORKS <filename> [<version>] | 9, 0, 0 |
| EXPORT_STL <solid ref> <filename> <file type> <accuracy> | 10, 4, 31 |
| EXTRACT_SEL_EDGE | 10, 7, 10 |
| EXTRUDE <z start> <z end> | 9, 0, 0 |
| FILE_CLOSE <file Number> | 9, 0, 0 |
| FILE_DELETE | 9, 0, 0 |
| FILE_DIALOG_EXTENSION <description> <extension> | 9, 0, 0 |
| FILE_DIALOG_DIR <initial directory> | 10, 8, 72 |
| FILE_DIALOG_NEW <caption> | 9, 0, 0 |
| FILE_DIALOG_SHOW <state> <filename> | 9, 0, 0 |
| FILE_EXISTS <filename> <status> | 9, 0, 0 |
| FILE_OPEN <file Number> <filename> [<type>] | 9, 0, 0 |
| FILE_READ_TEXT <file Number> <string variable> | 9, 0, 0 |
| FILE_READ_VARS <file Number> <list of up to 10 variable names> | 9, 0, 0 |
| FILE_WRITE_TEXT <file Number> <text> | 9, 0, 0 |
| FILE_WRITE_VARS <file Number> <list of up to 10 variable names> | 9, 0, 0 |
| FILTER_SHAPES <keep/remove> <type> <num> | 10, 3, 7 |
| FIT_CURVE <tolerance> <mode> | 9, 0, 0 |
| FOLDER_DIALOG_SHOW <caption> <initial directory> <folder name> | 9, 0, 0 |
| FONT <font name> <font size> | 9, 0, 0 |
| FOR <variable> = <start> TO <end> [STEP <value>] | 9, 0, 0 |
| FORCE_DEPTH <depth> | 22.0.35 |
| FRAME <left> <top> <width> <height> <caption> | 9, 0, 0 |
| GET_ACTION_BUTTON_STATE <button> <state>] | 10, 3, 9 |
| GET_ADD_GCODE_PROC_TEXT <process number> <text> | 22, 0, 38 |
| GET_ARC_DATA <geo ref> <cs> <rad> <xc> <yc> [<zc>] | 9, 0, 0 |
| GET_BASIC_UTIL_PROC_DATA <process number> <parameter type> <parameter name> <variable> | 9, 5, 9 |
| GET_BASIC_UTIL_PROC_NAME <process number> <variable> | 9, 5, 9 |
| GET_CIRCLE_DATA <geo ref> <cs> <rad> <xc> <yc> [<zc>] | 9, 0, 0 |
| GET_COMMANDS <filename> [<option>] [<ver1> <ver2> <ver3>] | 9, 0, 0 |
| GET_CS_LIST | 9, 0, 0 |
| GET_CS_MATRIX <cs number> <matrix array> [<local CS WP>] | 9, 5, 17 |
| GET_CS_NAME <cs number> <name> | 9, 0, 0 |
| GET_CS_WFO <cs number> <wfo number> | 10, 4, 21 |
| GET_CS_WP <cs number> <variable> | 9, 0, 0 |
| GET_CUSTOM_PROC_NAME <process number> <variable> | 9, 5, 9 |
| GET_ENGRAVE_DATA <parameter> <value> | 10, 8, 96 |
| GET_EDGE_EXTENTS <solid number> <edge number> <xmin> <ymin> <zmin> <xmax> <ymax> <zmax> | 9, 0, 0 |
| GET_EDGE_USER_COLOR <solid number> <face> <red> <green> <blue> | 11, 2, 16 |
| GET_FACE_EXTENTS <solid number> <face number> <xmin> <ymin> <zmin> <xmax> <ymax> <zmax> | 9, 0, 0 |
| GET_FACE_USER_COLOR <solid> <face> <red> <green> <blue> | 11, 2, 16 |
| GET_FEAT_END <geo ref> <cs> <xe> <ye> [<ze>] | 9, 0, 0 |
| GET_FEAT_START <geo ref> <cs> <xs> <ys> [<zs>] | 9, 0, 0 |
| GET_FEAT_TYPE <feature num> <type> | 9, 0, 0 |
| GET_FEATURE_DATA <feature number> <parameter> | 10, 2, 24 |
| GET_FEATURE_NUMBER <feature name> <feature number> | 10, 2, 24 |
| GET_FILENAME_PATTERN_LIST <pattern> <num files found> <filename array> [<sub folders>] | 9, 0, 0 |
| GET_GEO_AIR <geo ref> <wall/air state> | 9, 0, 0 |
| GET_GEO_ATTR_COLOR <geo ref> <color_attr> <red> <green> <blue> | 9, 0, 0 |
| GET_GEO_CS <geo ref> <cs number> | 9, 0, 0 |
| GET_GEO_USER_COLOR <geo ref> <red> <green> <blue> | 13, 0, 17 |
| GET_IDENTITY_MATRIX <matrix array> | 9, 5, 17 |
| GET_KEY_NUMBER | 9, 0, 0 |
| GET_KEY_TYPE <key type> | 9, 0, 0 |
| GET_KEY_STRING <key string> | 13, 0, 17 |
| GET_LINE_FEED_STATUS <geo ref> <status> | 9, 0, 0 |
| GET_LINE_PART_COMMENT <line number> <text> | 12, 0, 28 |
| GET_LINE_PROG_NOTES <line number> <text> | 12, 0, 28 |
| GET_MASTER_CS <master cs> <wp> <cs number> | 9, 5, 8 |
| GET_MULTI_PART_DATA <parameter> <values> | 12, 0, 30 |
| GET_MTM_DATA <spindle number> <parameter> <value> | 9, 0, 0 |
| GET_NEW_OP_LIST | 9, 5, 7 |
| GET_NUM_FEAT_SELECTED <num features> | 9, 0, 0 |
| GET_NUM_FEATURES <num features> | 10, 2, 24 |
| GET_NUM_PART_COMMENT_LINES <num lines> | 12, 0, 28 |
| GET_NUM_PROFILER_SHAPES <num shapes> | 10, 3, 7 |
| GET_NUM_PROG_NOTES_LINES <num lines> | 12, 0, 28 |
| GET_NUM_SELECTED_SHAPES <type> | 10, 3, 7 |
| GET_NUM_WFOS <num> | 14, 0, 28 |
| GET_OLD_OP_LIST | 9, 5, 7 |
| GET_OP_CRC_MARKER <op number> <marker num> <feature num> <param> <value> <type> | 9, 3, 2 |
| GET_OP_DATA <op number> <parameter> <value> | 9, 0, 0 |
| GET_OP_DWELL_MARKER <op number> <marker num> <feature num> <param> <value> <sec/rev> | 9, 3, 2 |
| GET_OP_FEAT_ANGLES <op number> <feature number> <start angle> <end angle> <included angle> | 9, 3, 2 |
| GET_OP_FEAT_ARC_DATA <op number> <feature num> <rad> <dir> <xc> <yc> [<zc>] | 9, 3, 2 |
| GET_OP_FEAT_CTOOL <op number> <feature number> <ctool type> <x> <y> <z> | 9, 0, 0 |
| GET_OP_FEAT_END <op number> <feature num> <xe> <ye> [<ze>] | 9, 3, 2 |
| GET_OP_FEAT_LEN <op number> <feature num> <len> | 9, 3, 2 |
| GET_OP_FEAT_START <op number> <feature num> <xs> <ys> [<zs>] | 9, 3, 2 |
| GET_OP_FEAT_TYPE <op number> <feature num> <type> | 9, 3, 2 |
| GET_OP_FEED_MARKER <op number> <marker num> <feature num> <param> <value> <type> | 9, 3, 2 |
| GET_OP_LIST [<selected>] | 9, 0, 0 |
| GET_OP_LIST_SHOWN <visible> | 9, 5, 7 |
| GET_OP_MARKER_DATA <op number> - leave the rest | 9, 5, 14 |
| GET_OP_MARKER_TYPE <op number> <marker num> <type> [<sub type>] | 9, 3, 2 |
| GET_OP_NUM_FEAT <op number> <num features> | 9, 3, 2 |
| GET_OP_NUM_MARKERS <op number> <num markers> | 9, 3, 2 |
| GET_OP_OFFSET_MARKER <op number> <marker num> <feature num> <param> <value> <tool/explicit> | 9, 3, 2 |
| GET_OP_PATH <op number> | 9, 5, 9 |
| GET_OP_PATH_END <op number> <xe> <ye> <ze> | 9, 0, 0 |
| GET_OP_PATH_START <op number> <xs> <ys> <zs> | 9, 0, 0 |
| GET_OP_SELECTED <op number> <selected> | 9, 0, 0 |
| GET_OP_SPEED_MARKER <op number> <marker num> <feature num> <param> <value> <fwd/rev> | 9, 3, 2 |
| GET_OP_STATUS <op number> <status> | 9, 0, 0 |
| GET_OP_STOP_MARKER <op number> <marker num> <feature num> <param> <value> | 9, 3, 2 |
| GET_OP_TEXT_MARKER <op number> <marker num> <feature num> <param> <string> | 9, 3, 2 |
| GET_OP_WFO_INDEX <op number> [<part number>] <wfo index> | 14, 0, 28 |
| GET_OP_WFO_NAME <op number> [<part number>] <wfo name> | 14, 0, 28 |
| GET_PART_DATA <parameter> <value> | 9, 0, 0 |
| GET_PATH_END <path number> <xe> <ye> <ze> | 9, 0, 0 |
| GET_PATH_FEAT_ANGLES <path number> <feature number> <start angle> <end angle> <included angle> | 9, 5, 14 |
| GET_PATH_FEAT_ARC_DATA <path number> <feature number> <rad> <dir> <xc> <yc> [<zc>] | 9, 5, 14 |
| GET_PATH_FEAT_CTOOL <path number> <feature number> <type> <x> <y> <z> | 9, 5, 14 |
| GET_PATH_FEAT_END <path number> <feature number> <xs> <ys> [<zs>] | 9, 5, 14 |
| GET_PATH_FEAT_LEN <path number> <feature number> <length> | 9, 5, 14 |
| GET_PATH_FEAT_START <path number> <feature number> <xs> <ys> [<zs>] | 9, 5, 14 |
| GET_PATH_FEAT_TYPE <path number> <feature number> <type> | 9, 5, 14 |
| GET_PATH_NUM_FEAT <path number> <number of features> | 9, 5, 14 |
| GET_PATH_START <path number> <xs> <ys> <zs> | 9, 0, 0 |
| GET_POST_DATA <parameter> <value> | 9, 0, 0 |
| GET_POST_FLAG <flag number> <variable> | 9, 0, 0 |
| GET_POST_NUM <post number variable> <value> | 9, 0, 0 |
| GET_POST_SEQ <variable> | 9, 0, 0 |
| GET_POST_VAR <variable name> <variable> | 9, 0, 0 |
| GET_PROC_DATA <process number> <parameter> <value> | 9, 0, 0 |
| GET_PROC_LIST [<selected>] | 9, 0, 0 |
| GET_PROC_LIST_SHOWN <visible> | 9, 5, 7 |
| GET_PROC_SELECTED <process number> <selected> | 9, 0, 0 |
| GET_PROC_STATUS <process number> <status> | 9, 0, 0 |
| GET_PROFILER_DEPTH <depth> | 10, 3, 7 |
| GET_PROFILER_SHAPE_SELECTED <shape> <selected> | 10, 3, 7 |
| GET_PROFILER_STATE <on/off> | 10, 3, 7 |
| GET_ROTATE_MATRIX <matrix array> <vx> <vy> <vz> <angle> | 9, 5, 17 |
| GET_SCALE_MATRIX <matrix array> <scale> | 9, 5, 17 |
| GET_SELECTION_EXTENTS <xmin> <ymin> <zmin> <xmax> <ymax> <zmax> | 10, 2, 24 |
| GET_SELECTED_GEO_REF <feature num> <geo ref> | 9, 0, 0 |
| GET_SELECTED_SOLID_LIST | 9, 0, 0 |
| GET_SELECTION_LIST <list number> | 9, 0, 0 |
| GET_SHAPE_DATA <shape> <parameter> <value> | 10, 3, 7 |
| GET_SHAPE_PATH <shape> <path number> | 10, 3, 7 |
| GET_SOLID_BAGGED <solid number> <status> | 9, 0, 0 |
| GET_SOLID_COMMENT <solid number> <comment> | 9, 0, 0 |
| GET_SOLID_CS <solid number> <cs number> | 9, 4, 25 |
| GET_SOLID_EDGE_LIST <solid num> [<selected>] | 9, 0, 0 |
| GET_SOLID_EXTENTS <solid number> <xmin> <ymin> <zmin> <xmax> <ymax> <zmax> | 9, 0, 0 |
| GET_SOLID_FACE_LIST <solid num> [<selected>] | 9, 0, 0 |
| GET_SOLID_FACE_NORMAL <solid number> <face number> <u> <v> <x> <y> <z> | 9, 0, 0 |
| GET_SOLID_FACE_POINT <solid number> <face number> <u> <v> <x> <y> <z> | 9, 0, 0 |
| GET_SOLID_FACE_UV <solid number> <face number> <u1> <v1> <u2> <v2> | 9, 0, 0 |
| GET_SOLID_LIST [<selected>] | 9, 0, 0 |
| GET_SOLID_NAME <solid number> <name> | 9, 0, 0 |
| GET_SOLID_SELECTED_EDGE_LIST <solid num> | 9, 0, 0 |
| GET_SOLID_SELECTED_FACE_LIST <solid num> | 9, 0, 0 |
| GET_SOLID_SHRINK_WRAP_BOX <solid number> <xmin> <ymin> <zmin> <xmax> <ymax> <zmax> | 13, 0, 24 |
| GET_SOLID_TYPE <solid number> <type> | 9, 0, 0 |
| GET_SPINDLE_NUM | 9, 0, 0 |
| GET_TG_DATA <tool number> <parameter> <variable> | 9, 0, 0 |
| GET_TMS_PART_TIME | 10, 9, 2 |
| GET_TOOL_DATA <tool number> <parameter> <variable> | 9, 0, 0 |
| GET_TOOL_LIST | 9, 5, 7 |
| GET_TOOL_LIST_SHOWN <visible> | 9, 5, 7 |
| GET_TOOL_SELECTED <tool number> <selected> | 9, 0, 0 |
| GET_TOOL_STATUS <tool number> <status> | 9, 0, 0 |
| GET_TRANSLATE_MATRIX <matrix array> <dx> <dy> <dz> | 9, 5, 17 |
| GET_UTIL_PROC_DATA <process number> <parameter> <value> | 9, 0, 0 |
| GET_UTIL_PROC_NUM_FIELDS <process number> <number of fields> | 13, 8, 36 |
| GET_UTIL_PROC_FIELD_NAME <process number> <field number> <field name> | 13, 8, 36 |
| GET_VOLUMILL_OP_DATA <op number> <parameter> <value> | 22, 0, 34 |
| GET_VOLUTURN_OP_DATA <op number> <parameter> <value> | 22, 0, 34 |
| GET_VOLUMILL_PROC_DATA <process number> <parameter> <value> | 22, 0, 34 |
| GET_VOLUTURN_PROC_DATA <process number> <parameter> <value> | 22, 0, 34 |
| GET_WFO_INDEX <name> <index> | 14, 0, 28 |
| GET_WFO_NAME <index> <name> | 14, 0, 28 |
| GET_WG_DATA <wg number> <parameter> <variable> | 9, 9, 19 |
| GET_WG_LIST | 9, 0, 0 |
| GET_WG_NAME <wg number> <name> | 9, 0, 0 |
| GET_WG_VISIBLE <wg number> <visible> | 10, 3, 11 |
| GET_WP <wp number> | 9, 0, 0 |
| GET_WP_PART_OFFSET <workpiece num> <x> <y> <z> | 9, 5, 16 |
| GLOBAL <var name>, <var name>, <var name> (max 50 variables) | 9, 0, 0 |
| GOTO <label> | 9, 0, 0 |
| HIDE_OP_LIST | 9, 5, 7 |
| HIDE_PROC_LIST | 9, 5, 7 |
| HIDE_TOOL_LIST | 9, 5, 7 |
| HOLEFR_ACTIVATE_HOLE_CS <hole num> <hole cs> [<new cs>] | 11, 0, 3 |
| HOLEFR_CREATE_GROUP <name> <new group number> | 10, 3, 11 |
| HOLEFR_DESELECT_ALL_HOLES | 11, 0, 3 |
| HOLEFR_DESELECT_HOLE <hole number> | 11, 0, 3 |
| HOLEFR_GET_DATA <wg number> <num groups> | 9, 3, 2 |
| HOLEFR_GET_GROUP <group> <num features> | 9, 3, 2 |
| HOLEFR_GET_GROUP_SELECTED <group number> <selected> | 10, 3, 11 |
| HOLEFR_GET_HOLE <hole number> | 10, 9, 6 |
| HOLEFR_GET_HOLE_SELECTED <hole number> <selected> | 10, 9, 6 |
| HOLEFR_GET_LIST_HOLES <array:list of holes> [<num holes>] | 11, 0, 3 |
| HOLEFR_GET_LIST_SELECTED_HOLES <array:list of holes> [<num holes>] | 11, 0, 3 |
| HOLEFR_GET_NUM_HOLES <num holes> | 10, 9, 6 |
| HOLEFR_GET_NUM_GROUPS <num groups> | 10, 3, 11 |
| HOLEFR_GET_NUM_SELECTED_HOLES <num holes> | 11, 0, 3 |
| HOLEFR_GET_SEGMENT <hole number> <segment number> | 10, 9, 6 |
| HOLEFR_SELECT_ALL_HOLES | 11, 0, 3 |
| HOLEFR_SELECT_HOLE <hole number> | 11, 0, 3 |
| HOLEFR_SET_HOLE_SELECTED <hole number> <selected> | 10, 9, 6 |
| HOLEFR_SET_GROUP_SELECTED <group number> <selected> | 10, 3, 11 |
| IF <value> <condition> <value> THEN | 9, 0, 0 |
| IMAGE <left> <top> <width> <height> <filename> | 9, 0, 0 |
| IMPORT_ACIS <filename> <scale> <unstitch> <show dialog> | 9, 0, 0 |
| IMPORT_DXF <filename> | 9, 0, 0 |
| IMPORT_FILE <filename> | 9, 4, 15 |
| IMPORT_IGES <filename> | 9, 0, 0 |
| IMPORT_INVENTOR <filename> | 9, 0, 0 |
| IMPORT_OPTION <parameter> <value> | 9, 0, 0 |
| IMPORT_PARASOLID <filename> | 9, 0, 0 |
| IMPORT_RHINO <filename> | 9, 0, 0 |
| IMPORT_SOLIDEDGE <filename> | 9, 0, 0 |
| IMPORT_SOLIDWORKS <filename> | 9, 0, 0 |
| #INCLUDE <filename> | 9, 5, 17 |
| INPUT <left> <top> <width> <height> <variable> [<default>] | 9, 0, 0 |
| INPUT <prompt> <variable> [<default> <caption>] | 9, 0, 0 |
| INSERT_OP_TILE <op number> <move all subsequent tiles down> | 9, 5, 7 |
| INSERT_PROC_TILE <before process number> | 9, 5, 7 |
| INSERT_TOOL_TILE <before tool number> | 9, 5, 7 |
| INT <n> | 9, 0, 0 |
| INVERT_MATRIX <matrix array> | 9, 5, 17 |
| IT_BLOCK_LIBRARY_ADD <block make> | 10, 9, 6 |
| IT_BLOCK_LIBRARY_DELETE <block make> | 10, 9, 6 |
| IT_BLOCK_LIBRARY_RENAME <old block make> <new block make> | 10, 9, 6 |
| IT_BLOCKS_ADD <block make> <block name> | 10, 9, 6 |
| IT_BLOCKS_ADD_SHANK_SIZE <block make> <block name> <value> | 10, 9, 6 |
| IT_BLOCKS_ADD_TYPE <block make> <block name> <value> | 10, 9, 6 |
| IT_BLOCKS_DELETE <block make> <block name> | 10, 9, 6 |
| IT_BLOCKS_GET_DATA <block make> <block name> <oarameter> <value> | 10, 9, 6 |
| IT_BLOCKS_GET_LIST_ALL_SHANK_SIZES <array:list of shank sizes> <num> | 10, 9, 6 |
| IT_BLOCKS_GET_LIST_SHANK_SIZES <block make> <block name> <array:list of shank sizes> <num> | 10, 9, 6 |
| IT_BLOCKS_GET_LIST_ALL_TYPES <array:list of types> <num> | 10, 9, 6 |
| IT_BLOCKS_GET_LIST_TYPES <block make> <block name> <array:list of types> <num> | 10, 9, 6 |
| IT_BLOCKS_GET_MAKE_NAME <index> <name> | 10, 9, 6 |
| IT_BLOCKS_GET_NAME <block make> <index> <block name> | 10, 9, 6 |
| IT_BLOCKS_GET_NUM_BLOCKS <name> <num blocks> | 10, 9, 6 |
| IT_BLOCKS_GET_NUM_MAKES <number of block names> | 10, 9, 6 |
| IT_BLOCKS_GET_SHANK_SIZE <block make> <block name> <index> <value> | 10, 9, 6 |
| IT_BLOCKS_GET_TYPE <block make> <block name> <index> <value> | 10, 9, 6 |
| IT_BLOCKS_REMOVE_SHANK_SIZE <block make> <block name> <value> | 10, 9, 6 |
| IT_BLOCKS_REMOVE_TYPE <block make> <block name> <value> | 10, 9, 6 |
| IT_BLOCKS_RENAME <block make> <old block name> <new block name> | 10, 9, 6 |
| IT_BLOCKS_SET_DATA <block make> <block name> <oarameter> <value> | 10, 9, 6 |
| IT_MACHINE_GET_ATTACH_NODE_DATA <index> <parameter> <value> | 10, 9, 6 |
| IT_MACHINE_GET_ATTACH_NODE_NAME <index> <name> | 10, 9, 6 |
| IT_MACHINE_GET_BLOCK_MAKE <index> <make> | 10, 9, 6 |
| IT_MACHINE_GET_DATA <parameter> <value> | 10, 9, 6 |
| IT_MACHINE_GET_FIXTURE_MAKE <index> <make> | 10, 9, 6 |
| IT_MACHINE_GET_FIXTURE_NODE_DATA <index> <parameter> <value> | 10, 9, 6 |
| IT_MACHINE_GET_FIXTURE_NODE_NAME <index> <name> | 10, 9, 6 |
| IT_MACHINE_GET_LIST_BLOCK_TYPES <array:list of types> <number found> | 10, 9, 6 |
| IT_MACHINE_GET_LIST_SHANK_SIZES <array:list of types> <number found> | 10, 9, 6 |
| IT_MACHINE_GET_STATION_DATA <toolgroup> <station> <parameter> <value> | 10, 9, 6 |
| IT_MACHINE_GET_TOOLGROUP_DATA <toolgroup> <parameter> <value> | 10, 9, 6 |
| IT_MACHINE_SET_ATTACH_NODE_DATA <index> <parameter> <value> | 10, 9, 6 |
| IT_MACHINE_SET_DATA <parameter> <value> | 10, 9, 6 |
| IT_MACHINE_SET_FIXTURE_NODE_DATA <index> <parameter> <value> | 10, 9, 6 |
| IT_MACHINE_SET_STATION_DATA <toolgroup> <station> <parameter> <value> | 10, 9, 6 |
| IT_MACHINE_SET_TOOLGROUP_DATA <toolgroup> <parameter> <value> | 10, 9, 6 |
| IT_MACHINE_STATION_GET_BLOCK_TYPE <toolgroup> <station> <index> <type number> [<type text>] | 10, 9, 6 |
| IT_MACHINE_STATION_GET_LIST_BLOCK_TYPES <toolgroup> <station> <array:list of types> <number found> | 10, 9, 6 |
| IT_MACHINE_STATION_GET_LIST_SHANK_SIZES <toolgroup> <station> <array:list of shank sizes> <number found> | 10, 9, 6 |
| IT_MACHINE_STATION_GET_SHANK_SIZE <toolgroup> <station> <index> <type number> [<type text>] | 10, 9, 6 |
| IT_MACHINE_STATION_GET_SUB_POS <toolgroup> <station> <index> | 10, 9, 6 |
| IT_MACHINE_STATION_SET_LIST_BLOCK_TYPES <toolgroup> <station> <array:list of types> <number in list> | 10, 9, 6 |
| IT_MACHINE_STATION_SET_LIST_SHANK_SIZES <toolgroup> <station> <array:list of shank sizes> <number in list> | 10, 9, 6 |
| IT_SETUP_NODE_ADD_FIXTURE <node> <matching fixture number> | 10, 9, 6 |
| IT_SETUP_NODE_GET_LIST_MATCHING_FIXTURES <node> <array:list of makes> <array:list of names> [<num>] | 10, 9, 6 |
| IT_SETUP_NODE_GET_MATCHING_FIXTURE <node> <matching fixture num> <block make> <block name> | 10, 9, 6 |
| IT_SETUP_NODE_GET_NUM_FIXTURES <node> <num> | 10, 9, 6 |
| IT_SETUP_NODE_GET_NUM_MATCHING_FIXTURES <node> <num> | 10, 9, 6 |
| IT_SETUP_NODE_REMOVE_FIXTURE <node> <fixture index> | 10, 9, 6 |
| IT_SETUP_PART_GET_FIXTURE <fixture index> <fixture make> <fixture name> | 10, 9, 6 |
| IT_SETUP_PART_GET_NUM_FIXTURES <num fixtures> | 10, 9, 6 |
| IT_SETUP_PART_REMOVE_FIXTURE <fixture index> | 10, 9, 6 |
| IT_SETUP_STATION_GET_BLOCK <toolgroup> <station> <block make> <block name> | 10, 9, 6 |
| IT_SETUP_STATION_GET_DATA <toolgroup> <station> <parameter> <value> | 10, 9, 6 |
| IT_SETUP_STATION_GET_LIST_MATCHING_BLOCKS <toolgroup> <station> <array:list of makes> <array:list of names> [<num>] | 10, 9, 6 |
| IT_SETUP_STATION_GET_MATCHING_BLOCK <toolgroup> <station> <index> <block make> <block name> | 10, 9, 6 |
| IT_SETUP_STATION_GET_NUM_BLOCKS <toolgroup> <station> <num blocks> | 14, 0, 36 |
| IT_SETUP_STATION_GET_NUM_MATCHING_BLOCKS <toolgroup> <station> <num> | 10, 9, 6 |
| IT_SETUP_STATION_REMOVE_BLOCK <toolgroup> <station> | 10, 9, 6 |
| IT_SETUP_STATION_SET_BLOCK <toolgroup> <station> <matching block number> | 10, 9, 6 |
| IT_SETUP_STATION_SET_DATA <toolgroup> <station> <parameter> <value> | 10, 9, 6 |
| IT_SETUP_TOOL_GET_BLOCK <tool> [<block num>] <block make> <block file> [<block name>] | 10, 9, 6 |
| IT_SETUP_TOOL_GET_DATA <tool> <parameter> <value> | 10, 9, 6 |
| IT_SETUP_TOOL_GET_LIST_MATCHING_BLOCKS <tool> <array:list of makes> <array:list of names> [<num>] | 10, 9, 6 |
| IT_SETUP_TOOL_GET_MATCHING_BLOCK <tool> <index> <block make> <block name> | 10, 9, 6 |
| IT_SETUP_TOOL_GET_NUM_BLOCKS <tool> <num> | 14, 0, 36 |
| IT_SETUP_TOOL_GET_NUM_MATCHING_BLOCKS <tool> <num> | 10, 9, 6 |
| IT_SETUP_TOOL_REMOVE_BLOCK <tool> | 10, 9, 6 |
| IT_SETUP_TOOL_SET_BLOCK <tool> <matching block number> | 10, 9, 6 |
| IT_SETUP_TOOL_SET_DATA <tool> <parameter> <value> | 10, 9, 6 |
| LABEL <left> <top> <width> <height> <label text> | 9, 0, 0 |
| LCASE$ <a$> | 9, 0, 0 |
| LEFT$ <a$>, <n> | 9, 0, 0 |
| LEN <a$> | 9, 0, 0 |
| LINE <xe> <ye> [<ze>] | 9, 0, 0 |
| LINE_2C <line number> <circle> <circle> <option> | 9, 0, 0 |
| LINE_2P <line number> <point> <point> | 9, 0, 0 |
| LINE_CA <line number> <circle> <angle> <option> | 9, 0, 0 |
| LINE_COPY <line number> <new line number> | 9, 0, 0 |
| LINE_HP <line number> <point> | 9, 0, 0 |
| LINE_LD <line number> <line> <distance> | 9, 0, 0 |
| LINE_PA <line number> <point> <angle> | 9, 0, 0 |
| LINE_PC <line number> <point> <circle> <option> | 9, 0, 0 |
| LINE_VP <line number> <point> | 9, 0, 0 |
| LOAD_DEFAULTS [1/0] | 9, 0, 0 |
| LOAD_OP_PROCESS <op number> [Allow open process dialog] | 9, 4, 15 |
| LOAD_POSITION | 9, 5, 7 |
| LOAD_PROCESS <process filename> [<clear process list> <exact match>] | 9, 0, 0 |
| LOAD_TOOLFILE <tool list filename> | 12, 0, 28 |
| LOCAL <var name>, <var name>, <var name> (max 50 variables) | 9, 0, 0 |
| LTRIM$ <a$> | 9, 0, 0 |
| MENU_LONG <text> | 12, 0, 30 |
| MESSAGE <text> [<caption>] [1/0] | 9, 0, 0 |
| MID$ <a$>, <n> | 9, 0, 0 |
| MIRROR_GEO <axis> <axis value> [1/0] | 9, 0, 0 |
| MIRROR_PATH <path number> <scale factor> | 9, 5, 14 |
| MIRROR_SOLID <axis> <coord> [<number of copies>] | 9, 0, 0 |
| MODIFY_CS <cs number> <ORIGIN/ALIGN_H/ALIGN_V> [<point or line data>] | 11, 0, 4 |
| MOVE_OP_TILE <from tile> <to tile> [<insert tile>] | 9, 5, 7 |
| MOVE_TOOL_TILE <from tile> <to tile> [<insert tile>] | 11, 0, 10 |
| MOVE_PART_ORIGIN <WorkPiece number> <dx> <dy> <dz> | 9, 5, 18 |
| MULTIPLY_MATRIX <matrix array 1> <matrix array 2> <result matrix> | 9, 5, 17 |
| NEW_CS <cs number> | 9, 0, 0 |
| NEW_PART <filename> | 9, 0, 0 |
| NEW_WG <name> | 9, 0, 0 |
| NEXT <variable> | 9, 0, 0 |
| NORMALIZE_MATRIX <matrix array> | 9, 5, 17 |
| OFFSET_SOLID <offset amount> | 12, 0, 9 |
| OK <left> <top> <width> <height> | 9, 0, 0 |
| ON_DROPDOWN <dropdown number> <index> <control to change> <change> | 9, 0, 0 |
| ON_ERROR GOTO <label> | 9, 0, 0 |
| ON_EVENT <control to check> <control to change> <change> | 9, 0, 0 |
| ON_RADIO <radio number> <value> <control to change> <change> | 9, 5, 16 |
| OP_TIME_ENGINE <options> | 10, 78, 0 |
| OPEN_BODY_BAG (no arguments) | 9, 9, 19 |
| OPEN_PART <filename> | 9, 0, 0 |
| OUTPUT_POST_LINE <text> | 9, 0, 0 |
| PATH_TO_GEOMETRY <path number>, <ref> | 10, 7, 18 |
| PERMANENT <var name>, <var name>, <var name> (max 50 variables) | 9, 0, 0 |
| POINT <x> <y> | 9, 0, 0 |
| POINT_2C <point number>, <circle>, <circle> | 9, 0, 0 |
| POINT_2L <point number>, <line>, <line> | 9, 0, 0 |
| POINT_2P <point number>, <point>, <point> | 9, 0, 0 |
| POINT_CA <point number>, <circle>, <angle> | 9, 0, 0 |
| POINT_COPY <point number>, <new point number> | 9, 0, 0 |
| POINT_GET_DATA <point number>, <x>, <y> | 9, 0, 0 |
| POINT_LC <point number>, <line>, <circle> | 9, 0, 0 |
| POINT_MIRROR <point number>, <axis>, <axis value> | 9, 0, 0 |
| POINT_ROTATE <point number>, <xc>, <yc>, <angle> | 9, 0, 0 |
| POINT_TRANSLATE <point number>, <dx>, <dy> | 9, 0, 0 |
| POINT_XY <point number>, <x>, <y>, | 9, 0, 0 |
| POINTS | 9, 0, 0 |
| POINTS_3D | 9, 0, 0 |
| PROGRESS_SET <value between 0.0 and 1.0> | 9, 0, 0 |
| PROGRESS_START <title> | 9, 0, 0 |
| PROGRESS_STOP | 9, 0, 0 |
| PROGRESS_TITLE <new title> | 9, 0, 0 |
| RADIO <left> <top> <width> <height> <text> <variable> [<default> <group number>] | 9, 0, 0 |
| RAPID <xe> <ye> [<ze>] | 9, 4, 12 |
| REDO_ALL_OPS | 9, 4, 15 |
| REDRAW | 9, 0, 0 |
| REDRAW_OP_LIST | 9, 5, 7 |
| REDRAW_PROC_LIST | 9, 5, 7 |
| REDRAW_TOOL_LIST | 9, 5, 7 |
| RENDER_CLOSE | 13, 0, 23 |
| RENDER_INIT <render mode> | 13, 0, 23 |
| RENDER_START | 13, 0, 23 |
| REVERSE_OP_PATH | 9, 0, 0 |
| REVERSE_PATH <path number> | 9, 5, 14 |
| REVOLVE <axis> <angle> | 9, 0, 0 |
| RIGHT$ <a$>, <n> | 9, 0, 0 |
| ROTATE_GEO <xc> <yc> <angle> [<number of copies>] | 9, 0, 0 |
| ROTATE_MATRIX <matrix array> <vx> <vy> <vz> | 9, 5, 17 |
| ROTATE_OP_PATH <xc> <yc> <zc> <angle> | 9, 0, 0 |
| ROTATE_PATH <path number> <xc> <yc> <zc> <angle> | 9, 5, 14 |
| ROTATE_SOLID <xc> <yc> <angle> [<number of copies>] | 9, 0, 0 |
| RTRIM$ <a$> | 9, 0, 0 |
| RUN_CMD <app name> [<text to pass to exe>], [<add quotes>], [<wait for it to finish>] | 9, 5, 16 |
| RUN_EXE <exe filename> [<text to pass to exe>], [<add quotes>], [<wait for it to finish>] | 9, 0, 0 |
| RUN_HOLEFR <option> | 9, 5, 14 |
| RUN_PLUGIN <plugin name> | 9, 0, 0 |
| RUN_POST [<post filename> <tape filename>] | 9, 0, 0 |
| RUN_REPORTER [<output file> <reporter type> [<custom template>] [render type>] | 12, 8, 35 |
| SAVE_DEFAULTS [1/0] | 9, 0, 0 |
| SAVE_PART | 9, 0, 0 |
| SAVE_PART_AS <filename> | 9, 0, 0 |
| SAVE_PROCESS <process filename> | 9, 3, 7 |
| SAVE_TOOLFILE <tool list filename> | 12, 0, 28 |
| SCALE_GEO <scale factor> | 9, 0, 0 |
| SCALE_MATRIX <matrix array> | 9, 5, 17 |
| SCALE_SOLID <factor> | 9, 0, 0 |
| SCROLL_OP_LIST <first tile> | 9, 0, 0 |
| SCROLL_PROC_LIST <first tile> | 9, 5, 7 |
| SCROLL_TOOL_LIST <first tile> | 9, 5, 7 |
| SEGMENT_SEL_CURVE <tolerance> <geometry type> | 10.7.11 |
| SELECT_ALL_GEO | 9, 0, 0 |
| SELECT_ALL_OPS | 9, 0, 0 |
| SELECT_ALL_PROCS | 9, 0, 0 |
| SELECT_ALL_SOLIDS | 9, 0, 0 |
| SELECT_ALL_TOOLS | 9, 0, 0 |
| SELECT_EDGE <solid> <edge> | 9, 4, 12 |
| SELECT_EDGE_BY_USER_COLOR <solid> <red> <green> <blue> [<add to selection>] | 11, 2, 16 |
| SELECT_FACE <solid> <face> | 9, 4, 12 |
| SELECT_FACE_BY_USER_COLOR <solid> <red> <green> <blue> [<add to selection>] | 11, 2, 16 |
| SELECT_FEATURE <feature number or name> | 10, 2, 24 |
| SELECT_GEO <geo ref> | 9, 0, 0 |
| SELECT_GEO_ATTR_COLOR <geo ref number> <red> <green> <blue> | 9, 0, 0 |
| SELECT_GEO_BY_USER_COLOR <red> <green> <blue> [<add to selection>] | 13, 0, 17 |
| SELECT_OP <op number> | 9, 0, 0 |
| SELECT_OP_PATH_TYPE <type> | 9, 5, 9 |
| SELECT_PROC <process number> | 9, 0, 0 |
| SELECT_SHAPE <shape ref> | 9, 0, 0 |
| SELECT_SOLID <solid number> | 9, 0, 0 |
| SELECT_TOOL <tool number> | 9, 0, 0 |
| SET_ACTION_BUTTON_STATE <button> <state>] | 10, 3, 9 |
| SET_ADD_GCODE_PROC_TEXT <process number> <text> | 22, 0, 38 |
| SET_BASIC_UTIL_PROC_DATA <process number> <parameter type> <parameter name> <value> | 9, 5, 9 |
| SET_BASIC_UTIL_PROC_NAME <process number> <value> | 9, 5, 9 |
| SET_CS <cs number> | 9, 0, 0 |
| SET_CS_MATRIX <cs number> <matrix array> | 9, 5, 17 |
| SET_CS_NAME <cs number> <name> | 9, 0, 0 |
| SET_CS_WFO <cs number> <wfo number> | 10, 4, 21 |
| SET_CUSTOM_PROC_NAME <process number> <value> | 9, 5, 9 |
| SET_EDGE_USER_COLOR <solid> <face> <red> <green> <blue> | 11, 2, 16 |
| SET_ENGRAVE_DATA <parameter> <value> | 10, 8, 96 |
| SET_FACE_USER_COLOR <solid> <face> <red> <green> <blue> | 11, 2, 16 |
| SET_GEO_AIR <geo ref> <wall/air state> | 9, 0, 0 |
| SET_GEO_ATTR_COLOR <geo ref> <red> <green> <blue> | 9, 0, 0 |
| SET_GEO_CS <geo ref> <cs number> | 9, 0, 0 |
| SET_GEO_USER_COLOR <geo ref> <red> <green> <blue> | 13, 0, 17 |
| SET_HOLEFR_PARAM <parameter> <value> | 9, 5, 14 |
| SET_LINE_FEED_STATUS <geo ref> <status> | 9, 0, 0 |
| SET_MARKERS <side> <start feature> <start dist> <end feature> <end dist> [<dir> <single feature>] | 9, 0, 0 |
| SET_MTM_DATA <spindle number> <parameter> <value> | 9, 0, 0 |
| SET_OP_DATA <op number> <parameter> <value> | 9, 0, 0 |
| SET_OP_PATH <op number> | 9, 5, 9 |
| SET_OP_WFO_INDEX <op number> [<part number>] <wfo index> | 14, 0, 28 |
| SET_OP_WFO_NAME <op number> [<part number>] <wfo name> | 14, 0, 28 |
| SET_PART_DATA <parameter> <value> | 9, 0, 0 |
| SET_POST_DATA <parameter> <value> | 9, 0, 0 |
| SET_POST_FLAG <flag name> <value> | 9, 0, 0 |
| SET_POST_NUM <variable number> <value> | 9, 0, 0 |
| SET_POST_VAR <variable name> <value> | 9, 0, 0 |
| SET_PROC_DATA <process number> <parameter> <value> | 9, 0, 0 |
| SET_PROFILER_DEPTH <depth> | 10, 3, 7 |
| SET_PROFILER_MARKERS many parameters | 10, 3, 7 |
| SET_PROFILER_SHAPE_SELECTED <shape> <selected> | 10, 3, 7 |
| SET_PROFILER_STATE <on/off> | 10, 3, 7 |
| SET_SELECTION_LIST <list number> <add> | 9, 0, 0 |
| SET_SOLID_BAGGED <solid number> <status> | 9, 0, 0 |
| SET_SOLID_COMMENT <solid number> <comment> | 9, 0, 0 |
| SET_SOLID_CS <solid number> <cs number> [<option>] | 9, 4, 25 |
| SET_SOLID_NAME <solid number> <name> | 9, 0, 0 |
| SET_SOLID_TYPE <solid number> <type> | 9, 0, 0 |
| SET_SPINDLE_NUM | 9, 0, 0 |
| SET_STATE <value> <control to set> <initial state> | 10, 9, 6 |
| SET_TG_DATA <tool number> <parameter> <value> | 9, 0, 0 |
| SET_TOOL_DATA <tool number> <parameter> <value> | 9, 0, 0 |
| SET_UTIL_PROC_DATA <process number> <parameter> <value> | 9, 0, 0 |
| SET_UNDO <undo type> | 9, 5, 9 |
| SET_VIEW <view> | 9, 0, 0 |
| SET_VOLUMILL_PROC_DATA <process number> <parameter> <value> | 22, 0, 34 |
| SET_VOLUTURN_PROC_DATA <process number> <parameter> <value> | 22, 0, 34 |
| SET_WG <wg number> | 9, 0, 0 |
| SET_WG_DATA <wg number> <parameter> <value> | 9, 9, 19 |
| SET_WG_NAME <wg number> <name> | 9, 0, 0 |
| SET_WG_VISIBLE <wg number> <visible> | 10, 3, 11 |
| SET_WP <current wp> | 9, 0, 0 |
| SET_WP_PART_OFFSET <workpiece num> <x> <y> <z> | 9, 5, 16 |
| SHOW_OP_LIST | 9, 5, 7 |
| SHOW_PROC_LIST | 9, 5, 7 |
| SHOW_TOOL_LIST | 9, 5, 7 |
| SHRINK_WRAP | 9, 0, 0 |
| SIN <n> | 9, 0, 0 |
| SLEEP | 9, 0, 0 |
| SOLID_CLEAR_HISTORY [<solid number>] | 14, 0, 26 |
| SOLID_CHECK_BODY_VALIDITY [<solid number>] | 14, 0, 26 |
| SOLID_CHECK_FACE_VALIDITY [<solid number>] | 14, 0, 26 |
| SOLID_INTERSECT <solid 1> <solid 2> | 9, 0, 0 |
| SOLID_MACHINING_FACE_CHECK [<solid number>] | 14, 0, 26 |
| SOLID_REBUILD [<solid number>] | 14, 0, 26 |
| SOLID_REMOVE_UNEEDED_TOPOLOGY [<solid number>] | 14, 0, 26 |
| SOLID_SIMPLIFY [<solid number>] | 14, 0, 26 |
| SOLID_SUBTRACT <solid 1> <solid 2> | 9, 0, 0 |
| SOLID_UNION <solid 1> <solid 2> | 9, 0, 0 |
| SORT_GEO <sort type> <main axis x> <scan height> <max gap> <plus X> <plus Y> | 10.2.27 |
| SORT_SHAPES <sort type> <sort method> | 10, 3, 7 |
| SORT_OPS | 10, 1, 0 |
| SQRT <n> | 9, 0, 0 |
| START <xs> <ys> [<zs>] | 9, 0, 0 |
| STOP <message> | 9, 0, 0 |
| SWAP_VALUES <variable 1> <variable 2> | 9, 5, 9 |
| TAN <n> | 9, 0, 0 |
| TRACE <ON/OFF> | 9, 5, 9 |
| TRANSFORM_SOLID <matrix array> [<number of copies>] | 22, 0, 38 |
| TRANSLATE_GEO <dx> <dy> [<dz>] [<num copies>] | 9, 0, 0 |
| TRANSLATE_MATRIX <matrix array> <dx> <dy> <dz> | 9, 5, 17 |
| TRANSLATE_OP_PATH <dx> <dy> <dz> | 9, 5, 9 |
| TRANSLATE_PATH <path number> <dx> <dy> <dz> | 9, 5, 14 |
| TRANSLATE_SOLID <dx> <dy> <dz> [<number of copies>] | 9, 0, 0 |
| TRANSFORM_POSITION <matrix array> <x> <y> <z> | 10, 7, 11 |
| TRANSFORM_VECTOR <matrix array> <vx> <vy> <vz> | 10, 7, 11 |
| TRIM$ <a$> | 9, 0, 0 |
| UCASE$ <a$> | 9, 0, 0 |
| UPDATE_CS_WINDOW | 9, 0, 0 |
| UPDATE_WG_WINDOW | 9, 0, 0 |
| VAL <a$> | 9, 0, 0 |
| YESNO <prompt> <variable> [<caption>] | 9, 0, 0 |
| ZOOM_VIEW <view scale> | 9, 0, 0 |
