All Variables Grouped
From Macros Wiki
| Program_Variables | Description |
| PLUGIN_VERSION_1 | Version number of GibbsCAM that the macro plugin |
| PLUGIN_VERSION_2 | was developed for, expressed as 3 values. eg 9.5.1 |
| PLUGIN_VERSION_3 | version_1 = 9, version_2 = 5, version_3 = 1 |
| GIBBSCAM_VERSION_1 | Version number of GibbsCAM that is |
| GIBBSCAM_VERSION_2 | currently running, expressed as 3 values |
| GIBBSCAM_VERSION_3 | same format as plugin_version |
| CURRENT_WG_NUMBER | The current WorkGroup number |
| CURRENT_CS_NUMBER | The current CS number |
| SCREEN_WIDTH | Total screen width, in screen units |
| SCREEN_HEIGHT | Total screen height |
| GIBBSCAM_WINDOW_X1 | Left corner of GibbsCAM window |
| GIBBSCAM_WINDOW_Y1 | Top corner of GibbsCAM window |
| GIBBSCAM_WINDOW_X2 | Right corner of GibbsCAM window |
| GIBBSCAM_WINDOW_Y2 | Bottom corner of GibbsCAM window |
| EXCEL_IS_OPEN | Set to 1 if Excel is currently opened by a macro |
| EXCEL_IS_VISIBLE | Set to 1 if Excel is visible, 0 if hidden |
| These variables are set by some of the macro commands | Description |
| PointRef | Reference number of point created |
| LineRef | Reference number of line created |
| CircleRef | Reference number of circle created |
| ContourRef | Reference number of contour created |
| SolidRef | Reference number of solid created |
| ExcelError | Error code set by all Excel commands (0 = no error) |
| ExcelCellLength | Length of text read from a cell in characters |
| FileError | Error code set by all file commands (0 = no error) |
| ReadVarsNumVars | Number of variables read using READ_NUM_VARS command |
| HoleFrError | Error code set by all HOLEFR commands (0 = no error) |
| CsNumber | Number of CS created |
| WgNumber | Number of WorkGroup created |
| Button | Number of button pressed on macro dialog (0 = OK button) |
The HOLEFR_GET_FEAT command sets these variables.
HOLEFR_GET_FEAT_Variables
| HOLEFR Variables | Description |
| HoleFrRef | Hole Feature Reference number |
| HoleFrType | Hole Type |
| HoleFrCS | Hole CS number |
| HoleFrRevCS | CS number for opposite direction |
| HoleFrThroughType | Though Hole Type |
| HoleFrDia | Overall Diameter |
| HoleFrDiaTop | Diameter at Top of Hole |
| HoleFrDepth | Total Depth |
| HoleFrMidDepth | Mid Depth |
| HoleFrFullDepth | Full Depth |
| HoleFrTopClear | Top Clearance Amount |
| HoleFrBottomClear | Bottom Clearance Amount |
| HoleFrTopZ | Top Z |
| HoleFrBottomZ | Bottom Z |
| HoleFrTop | Top |
| HoleFrBottom | Bottom |
| HoleFrWidth | Width |
| HoleFrAngle | Angle |
| HoleFrTipAngle | Tip Angle |
| HoleFrPosX | Hole Position |
| HoleFrPosY | measured at the |
| HoleFrPosZ | bottom of the hole |
| HoleFrPosTopX | Hole Position |
| HoleFrPosTopY | measured at the |
| HoleFrPosTopZ | top of the hole |
| HoleFrPosAxisX | Axis vector |
| HoleFrPosAxisY | measured from |
| HoleFrPosAxisZ | bottom to top |
