Voluturn parameter
From Macros Wiki
Jump to navigationJump to search
| Parameter | Description | Version Number |
|---|---|---|
| Entryclear | Entry Clearance | 22.0.34 |
| ExitClear | Exit Clearance | 22.0.34 |
| Zstart | Z Start | 22.0.34 |
| RoughDir | Rough Direction | 22.0.34 |
| Forward | 0 or 1 | 22.0.34 |
| BackAndForth | 0 or 1 | 22.0.34 |
| FinishStock | Finish Stock | 22.0.34 |
| XRStock | XY Stock | 22.0.34 |
| ZStock | Z Stpck | 22.0.34 |
| RPM | Spindle Speed | 22.0.34 |
| Feedrate | Feedrate | 22.0.34 |
| HighFeed | Hight Feedrate | 22.0.34 |
| AutoClear | 0 or 1 | 22.0.34 |
| MaterialOnly | 0 or 1 | 22.0.34 |
| MatOnlyClear | Material Only Clearance | 22.0.34 |
| CutOtherSide | 0 or 1 | 22.0.34 |
| UseCSS | 0 or 1 | 22.0.34 |
| MaxRPM | Maximum spindle Speed | 22.0.34 |
| AutoNotchRamp | 0 or 1 | 22.0.34 |
| CheckHolder | 0 or 1 | 22.0.34 |
| HolderClearance | Holder Clearance | 22.0.34 |
| AvoidPlunging | 0 or 1 | 22.0.34 |
| MinRadRatio | Minimum Radius Ratio | 22.0.34 |
| MinRadius | Minimum Radius | 22.0.34 |
| StepDown | Step Down Amount | 22.0.34 |
