General Part Data Parameters
From Macros Wiki
Jump to navigationJump to search
| Floating Point Values | Description | Version Number |
| CP1 | CP1 value | |
| CLEAR_RAD | Clear radius | |
| AUTO_CLEAR_VAL | Auto clearance value | |
| GRAPHIC_PART_DIST_VAL | Graphic part distance | |
| SPLINE_MACHINING_TOLERANCE | Entry Line Approach (0 or 1) | 11, 3, 7 |
| PART_ROUGH_TOLERANCE | Part Rough Tolerance | 11, 3, 7 |
| PART_FINISH_TOLERANCE | Part Finish Tolerance | 11, 3, 7 |
| FIXTURE_TOLERANCE | Fixture Tolerance | 11, 3, 7 |
| FIXTURE_CLEARANCE | Fixture Clearance | 11, 3, 7 |
| String Values | ||
| PART_NAME | Part name | |
| PART_FILE | Part filename | |
| MDD_NAME | MDD name | |
| MDD_FILE | MDD filename | |
| COMMENT | Part comment | |
| ALLOY | Material alloy type | |
| FAMILY | Material family type | |
| HARDNESS | Material hardness | |
| Integer Values | ||
| TYPE | Part type (mill or lathe) | |
| UNITS | Part units (inch or metric) | |
| RADIUS | Part radius | |
| AUTO_CLEAR_ON | Is Auto Clearance enabled (1 = yes) | |
| TOOL_POS | Is Tool Position enabled (1 = yes) | |
| MACH_FLOWS | Number of Flows | |
| TG_COUNT | Number of Toolgroups | |
| WP_COUNT | Number of WorkPieces | |
| NUM_FLOWS | Number of flows | |
| NUM_TOOL_GROUPS | Number of ToolGroups | |
| GRAPHIC_PART_DIST_ON | Is graphic part distance checked (1 = yes) | |
| ENTRY_LINE_APPROACH | Entry Line Approach (0 or 1) | 11, 3, 7 |
| MILL_CRC_TYPE | Mill CRC Type (0, 1 or 2) | 11, 3, 7 |
| LATHE_CRC_TYPE | Lathe CRC Type (0, 1 or 2) | 11, 3, 7 |
| CRC_ENTRY_LINE_VALIDATION | CRC Entry Line Validation (0 or 1) | 11, 3, 7 |
| OMIT_SMALL_CHORD_ARCS | Omit Small Chord Arcs (0 or 1) | 11, 3, 7 |
| USE_GLOBAL_SETTINGS_FOR_SOLIDS | Use Global Settings For Solids (0 or 1) | 11, 3, 7 |
