All Variables
From Macros Wiki
Jump to navigationJump to search
| Variable | Variable set automatically by the system | Version Number |
| Button | Number of button pressed on macro dialog (0 = OK button) | 9, 4, 25 |
| CircleRef | Reference number of circle created by a circle geometry command | 9, 4, 25 |
| ContourRef | Reference number of contour created by a contour geometry command | 9, 4, 25 |
| CsNumber | Number of CS created by the NEW_CS command | 9, 4, 25 |
| CURRENT_CS_NUM | Current CS number | 9, 0, 0 |
| CURRENT_WG_NUM | Current WorkGroup number | 9, 0, 0 |
| ExcelCellLength | Set by the EXCEL_FIND_CELL command | 9, 4, 25 |
| ExcelError | Error code set by all Excel commands | 9, 4, 25 |
| EXCEL_IS_OPEN | Is an excel file is open (1 = yes, 0 = no) | 9, 0, 0 |
| EXCEL_IS_VISIBLE | Is Excel visible (1 = yes, 0 = hidden) | 9, 0, 0 |
| FEAT_TYPE_ARC | Circular Arc feature type | 9, 0, 0 |
| FEAT_TYPE_CTOOL | CTool feature type | 9, 0, 0 |
| FEAT_TYPE_CURVE | Curve (spline) feature type | 9, 0, 0 |
| FEAT_TYPE_LINE_IJK | Line feature with IJK vector | 9, 0, 0 |
| FEAT_TYPE_LINE | Line feature type | 9, 0, 0 |
| FEAT_TYPE_MARKER | CTool feature type | 9, 0, 0 |
| FEAT_TYPE_POINT | Point feature type | 9, 0, 0 |
| FEAT_TYPE_RAPID | Rapid Move feature type | 9, 0, 0 |
| FEAT_TYPE_SPLINE | Curve (spline) feature type | 9, 0, 0 |
| FileError | Error code set by all file commands | 9, 4, 25 |
| GIBBSCAM_LANGUAGE | The language of GibbsCAM running | 11, 0, 7 |
| GIBBSCAM_VERSION_1 | The version of GibbsCAM running | 9, 4, 24 |
| GIBBSCAM_VERSION_2 | The version of GibbsCAM running | 9, 4, 24 |
| GIBBSCAM_VERSION_3 | The version of GibbsCAM running | 9, 4, 24 |
| GIBBSCAM_WINDOW_X1 | First X position (left) of the GibbsCAM window | 9, 0, 0 |
| GIBBSCAM_WINDOW_X2 | Second X position (right) of the GibbsCAM window | 9, 0, 0 |
| GIBBSCAM_WINDOW_Y1 | First Y position (top) of the GibbsCAM window | 9, 0, 0 |
| GIBBSCAM_WINDOW_Y2 | Second X position (bottom) of the GibbsCAM window | 9, 0, 0 |
| HoleFrAngle | Hole feature data set by the HOLEFR_GET_FEAT command | 9, 4, 25 |
| HoleFrBottom | Hole feature data set by the HOLEFR_GET_FEAT command | 9, 4, 25 |
| HoleFrBottomClear | Hole feature data set by the HOLEFR_GET_FEAT command | 9, 4, 25 |
| HoleFrBottomZ | Hole feature data set by the HOLEFR_GET_FEAT command | 9, 4, 25 |
| HoleFrCS | Hole feature data set by the HOLEFR_GET_FEAT command | 9, 4, 25 |
| HoleFrDepth | Hole feature data set by the HOLEFR_GET_FEAT command | 9, 4, 25 |
| HoleFrDia | Hole feature data set by the HOLEFR_GET_FEAT command | 9, 4, 25 |
| HoleFrDiaTop | Hole feature data set by the HOLEFR_GET_FEAT command | 9, 4, 25 |
| HoleFrError | Error code set by HOLEFR commands | 9, 4, 25 |
| HoleFrFullDepth | Hole feature data set by the HOLEFR_GET_FEAT command | 9, 4, 25 |
| HoleFrMidDepth | Hole feature data set by the HOLEFR_GET_FEAT command | 9, 4, 25 |
| HoleFrPosAxisX | Hole feature data set by the HOLEFR_GET_FEAT command | 9, 4, 25 |
| HoleFrPosAxisY | Hole feature data set by the HOLEFR_GET_FEAT command | 9, 4, 25 |
| HoleFrPosAxisZ | Hole feature data set by the HOLEFR_GET_FEAT command | 9, 4, 25 |
| HoleFrPosTopX | Hole feature data set by the HOLEFR_GET_FEAT command | 9, 4, 25 |
| HoleFrPosTopY | Hole feature data set by the HOLEFR_GET_FEAT command | 9, 4, 25 |
| HoleFrPosTopZ | Hole feature data set by the HOLEFR_GET_FEAT command | 9, 4, 25 |
| HoleFrPosX | Hole feature data set by the HOLEFR_GET_FEAT command | 9, 4, 25 |
| HoleFrPosY | Hole feature data set by the HOLEFR_GET_FEAT command | 9, 4, 25 |
| HoleFrPosZ | Hole feature data set by the HOLEFR_GET_FEAT command | 9, 4, 25 |
| HoleFrRef | Hole feature data set by the HOLEFR_GET_FEAT command | 9, 4, 25 |
| HoleFrRevCS | Hole feature data set by the HOLEFR_GET_FEAT command | 9, 4, 25 |
| HoleFrThroughType | Hole feature data set by the HOLEFR_GET_FEAT command | 9, 4, 25 |
| HoleFrtipAngle | Hole feature data set by the HOLEFR_GET_FEAT command | 9, 4, 25 |
| HoleFrTop | Hole feature data set by the HOLEFR_GET_FEAT command | 9, 4, 25 |
| HoleFrTopClear | Hole feature data set by the HOLEFR_GET_FEAT command | 9, 4, 25 |
| HoleFrTopZ | Hole feature data set by the HOLEFR_GET_FEAT command | 9, 4, 25 |
| HoleFrType | Hole feature data set by the HOLEFR_GET_FEAT command | 9, 4, 25 |
| HoleFrWidth | Hole feature data set by the HOLEFR_GET_FEAT command | 9, 4, 25 |
| LANGUAGE_CHINESE | Chinese language | 11, 0, 7 |
| LANGUAGE_CZECH | Czech language | 11, 0, 7 |
| LANGUAGE_ENGLISH | English language | 11, 0, 7 |
| LANGUAGE_FRENCH | French language | 11, 0, 7 |
| LANGUAGE_GERMAN | German language | 11, 0, 7 |
| LANGUAGE_ITALIAN | Italian language | 11, 0, 7 |
| LANGUAGE_JAPANESE | Japanese language | 11, 0, 7 |
| LANGUAGE_KOREAN | Korean language | 11, 0, 7 |
| LANGUAGE_POLISH | Polish language | 11, 0, 7 |
| LANGUAGE_PORTUGESE | Portugese language | 11, 0, 7 |
| LANGUAGE_RUSSIAN | Russian language | 11, 0, 7 |
| LANGUAGE_SPANISH | Spanish language | 11, 0, 7 |
| LANGUAGE_SWEDISH | Swedish language | 11, 0, 7 |
| LANGUAGE_TURKISH | Turkish language | 11, 0, 7 |
| LineRef | Reference number of line created by a line geometry command | 9, 4, 25 |
| LTOOL_TYPE_80_DEG | Lathe Tool type, 80 Degree | 11, 0, 4 |
| LTOOL_TYPE_75_DEG | Lathe Tool type, 75 Degree | 11, 0, 4 |
| LTOOL_TYPE_55_DEG | Lathe Tool type, 55 Degree | 11, 0, 4 |
| LTOOL_TYPE_35_DEG | Lathe Tool type, 35 Degree | 11, 0, 4 |
| LTOOL_TYPE_ROUND | Lathe Tool type, Round | 11, 0, 4 |
| LTOOL_TYPE_SQUARE | Lathe Tool type, Square | 11, 0, 4 |
| LTOOL_TYPE_TRIANGLE | Lathe Tool type, Triangle | 11, 0, 4 |
| LTOOL_TYPE_TRIGON | Lathe Tool type, Trigon | 11, 0, 4 |
| LTOOL_TYPE_PENTAGON | Lathe Tool type, Pentagon | 11, 0, 4 |
| LTOOL_TYPE_55_PARA | Lathe Tool type, 55 Degree Para. | 11, 0, 4 |
| LTOOL_TYPE_RECTANGLE | Lathe Tool type, Rectangle | 11, 0, 4 |
| LTOOL_TYPE_GROOVE | Lathe Tool type, Groove | 11, 0, 4 |
| LTOOL_TYPE_CUTOFF | Lathe Tool type, Cut off | 11, 0, 4 |
| LTOOL_TYPE_THREADN | Lathe Tool type, Groove Thread | 11, 0, 4 |
| LTOOL_TYPE_THREADL | Lathe Tool type, Laydown Thread | 11, 0, 4 |
| LTOOL_TYPE_VPROFILE | Lathe Tool type, V profile | 11, 0, 4 |
| LTOOL_TYPE_2DFORM | Lathe Tool type, 2D Form | 11, 0, 4 |
| LTOOL_TYPE_3DFORM | Lathe Tool type, 3D Form | 11, 0, 4 |
| LTOOL_TYPE_UTIL | Lathe Tool type, Utility | 11, 0, 4 |
| MTOOL_TYPE_ROUGH_END_MILL | Mill Tool type, Rough End Mill | 11, 0, 4 |
| MTOOL_TYPE_FINISH_END_MILL | Mill Tool type, Finish End Mill | 11, 0, 4 |
| MTOOL_TYPE_BALL_END_MILL | Mill Tool type, Ball End Mill | 11, 0, 4 |
| MTOOL_TYPE_CONVEX_TIP | Mill Tool type, Convex Tip | 11, 0, 4 |
| MTOOL_TYPE_LOLLIPOP | Mill Tool type, Lollipop | 11, 0, 4 |
| MTOOL_TYPE_BARREL | Mill Tool type, Barrel | 11, 0, 4 |
| MTOOL_TYPE_DOVETAIL | Mill Tool type, DoveTail | 11, 0, 4 |
| MTOOL_TYPE_SHELL_CUTTER | Mill Tool type, Shell Cutter | 11, 0, 4 |
| MTOOL_TYPE_FACE_CUTTER | Mill Tool type, Face Cutter | 11, 0, 4 |
| MTOOL_TYPE_FLY_CUTTER | Mill Tool type, Fly Cutter | 11, 0, 4 |
| MTOOL_TYPE_KEY_CUTTER | Mill Tool type, Key Cutter | 11, 0, 4 |
| MTOOL_TYPE_THREAD_HALF_PROF | Mill Tool type, Half Prof. Thread | 11, 0, 4 |
| MTOOL_TYPE_THREAD_FULL_PROF | Mill Tool type, Full Prof. Thread | 11, 2, 4 |
| MTOOL_TYPE_DRILL | Mill Tool type, Drill | 11, 0, 4 |
| MTOOL_TYPE_CENTER_DRILL | Mill Tool type, Center Drill | 11, 0, 4 |
| MTOOL_TYPE_SPOT_DRILL | Mill Tool type, Spot Drill | 11, 0, 4 |
| MTOOL_TYPE_BORE | Mill Tool type, Bore | 11, 0, 4 |
| MTOOL_TYPE_BACK_BORE | Mill Tool type, Back Bore | 11, 0, 4 |
| MTOOL_TYPE_TAP | Mill Tool type, Tap | 11, 0, 4 |
| MTOOL_TYPE_RIGID_TAP | Mill Tool type, Rigid Tap | 11, 0, 4 |
| MTOOL_TYPE_SPOT_FACE | Mill Tool type, Spot Face | 11, 0, 4 |
| MTOOL_TYPE_REAMER | Mill Tool type, Reamer | 11, 0, 4 |
| MTOOL_TYPE_COUNTERSINK | Mill Tool type, Countersink | 11, 0, 4 |
| MTOOL_TYPE_ROUNDOVER | Mill Tool type, Roundover | 11, 0, 4 |
| MTOOL_TYPE_TANGENT_MILL | Mill Tool type, Tangent Mill | 13, 0, 18 |
| MTOOL_TYPE_TAPERED_BARREL | Mill Tool type, Tapered Barrel | 13, 0, 18 |
| MTOOL_TYPE_2DFORM | Mill Tool type, 2D Form Tool | 11, 0, 4 |
| MTOOL_TYPE_3DFORM | Mill Tool type, 3D Form Tool | 11, 0, 4 |
| MTOOL_HOLDER_TYPE | Mill Tool holder type | 9, 4, 24 |
| MTOOL_HOLDER_TYPE_BORE | Mill Tool holder type, Bore | 9, 4, 24 |
| MTOOL_HOLDER_TYPE_COLLET | Mill Tool holder type, Collet | 9, 4, 24 |
| MTOOL_HOLDER_TYPE_DRILL | Mill Tool holder type, Drill | 9, 4, 24 |
| MTOOL_HOLDER_TYPE_MILL | Mill Tool holder, Mill | 9, 4, 24 |
| MTOOL_HOLDER_TYPE_ROT_CLAMP | Mill Tool holder type, Rotary Cclamp | 9, 4, 24 |
| MTOOL_HOLDER_TYPE_SHELL | Mill Tool holder type, Shell | 9, 4, 24 |
| MTOOL_HOLDER_TYPE_SHRINK_FIT | Mill Tool holder type, Shrink Fit | 9, 4, 24 |
| MTOOL_HOLDER_TYPE_TAP | Mill Tool holder type, Tap | 9, 4, 24 |
| MTOOL_HOLDER_TYPE_TG_COLLET | Mill Tool holder type, Collet - TG | 9, 4, 24 |
| ATOOL_TYPE_GENERIC | Additive Tool type, Generic | 13, 8, 9 |
| ATOOL_TYPE_AMBIT | Additive Tool type, Ambit | 13, 8, 9 |
| ATOOL_TYPE_LASERTEC | Additive Tool type, Lasertec | 13, 8, 9 |
| ATOOL_TYPE_OKUMA | Additive Tool type, Okuma | 13, 8, 9 |
| ATOOL_TYPE_OPTOMEC | Additive Tool type, Optomec | 13, 8, 9 |
| BTOOL_TYPE_LIN_HEXAGON | Broaching Tool type, Linear Hexagon | 13, 0, 18 |
| BTOOL_TYPE_LIN_KEYWAY | Broaching Tool type, Linear Keyway | 13, 0, 18 |
| BTOOL_TYPE_LIN_CHAMFER | Broaching Tool type, Linear Chamfer | 13, 0, 18 |
| BTOOL_TYPE_LIN_CORNER | Broaching Tool type, Linear Corner | 13, 0, 18 |
| BTOOL_TYPE_LIN_HEXALOBULAR | Broaching Tool type, Linear Hexalobular | 13, 0, 18 |
| BTOOL_TYPE_LIN_2DFORM | Broaching Tool type, Linear 2D Form | 13, 0, 18 |
| BTOOL_TYPE_LIN_3DFORM | Broaching Tool type, Linear 3D Form | 13, 0, 18 |
| BTOOL_TYPE_ROT_HEXAGON | Broaching Tool type, Rotary Hexagon | 13, 0, 18 |
| BTOOL_TYPE_ROT_DOUBLE_HEX | Broaching Tool type, Rotary Double Hexagon | 13, 0, 18 |
| BTOOL_TYPE_ROT_RECTANGLE | Broaching Tool type, Rotary Rectangle | 13, 0, 18 |
| BTOOL_TYPE_ROT_HEXALOBULAR | Broaching Tool type, Rotary Hexalobular | 13, 0, 18 |
| BTOOL_TYPE_ROT_2DFORM | Broaching Tool type, Rotary 2D Form | 13, 0, 18 |
| BTOOL_TYPE_ROT_3DFORM | Broaching Tool type, Rotary 3D Form | 13, 0, 18 |
| BTOOL_TYPE_ROT_3DFORM | Broaching Tool type, Rotary 3D Form | 13, 0, 18 |
| PLUGIN_VERSION_1 | Version of the Macro Plugin running | 9, 4, 24 |
| PLUGIN_VERSION_2 | Version of the Macro Plugin running | 9, 4, 24 |
| PLUGIN_VERSION_3 | Version of the Macro Plugin running | 9, 4, 24 |
| PointRef | Reference number of point created by a point geometry command | 9, 4, 25 |
| ReadVarsNumVars | Number of variables read using READ_NUM_VARS command | 9, 4, 25 |
| SCREEN_HEIGHT | Total height of the screen | 9, 0, 0 |
| SCREEN_WIDTH | Total width of the screen | 9, 0, 0 |
| SolidRef | Number of solid created by an EXTRUDE_SHAPE command | 9, 4, 25 |
| TOOL_ORIENT_DL | Lathe Tool orientation is down left | 9, 4, 24 |
| TOOL_ORIENT_DOWN_LEFT | Lathe Tool orientation is down left | 9, 4, 24 |
| TOOL_ORIENT_DOWN_RIGHT | Lathe Tool orientation is down right | 9, 4, 24 |
| TOOL_ORIENT_DR | Lathe Tool orientation is down right | 9, 4, 24 |
| TOOL_ORIENT_LD | Lathe Tool orientation is left down | 9, 4, 24 |
| TOOL_ORIENT_LEFT_DOWN | Lathe Tool orientation is left down | 9, 4, 24 |
| TOOL_ORIENT_LEFT_UP | Lathe Tool orientation is left up | 9, 4, 24 |
| TOOL_ORIENT_LU | Lathe Tool orientation is Left Up | 9, 4, 24 |
| TOOL_ORIENT_RD | Lathe Tool orientation is Right Down | 9, 4, 24 |
| TOOL_ORIENT_RIGHT_DOWN | Lathe Tool orientation is Right Down | 9, 4, 24 |
| TOOL_ORIENT_RIGHT_UP | Lathe Tool orientation is Right Up | 9, 4, 24 |
| TOOL_ORIENT_RU | Lathe Tool orientation is Right Up | 9, 4, 24 |
| TOOL_ORIENT_UL | Lathe Tool orientation is Up Left | 9, 4, 24 |
| TOOL_ORIENT_UP_LEFT | Lathe Tool orientation is Up Left | 9, 4, 24 |
| TOOL_ORIENT_UP_RIGHT | Lathe Tool orientation is Up Right | 9, 4, 24 |
| TOOL_ORIENT_UR | Lathe Tool orientation is Up Right | 9, 4, 24 |
| TOOL_TYPE_35_DEG | Lathe Insert Type is 35 Degrees | 9, 4, 24 |
| TOOL_TYPE_55_DEG | Lathe Insert Type is 55 Degrees | 9, 4, 24 |
| TOOL_TYPE_55_PARA | Lathe Insert Type is 55 Deg parallelogram | 9, 4, 24 |
| TOOL_TYPE_80_DEG | Lathe Insert Type is 80 Degrees | 9, 4, 24 |
| TOOL_TYPE_BACK_BORE | Mill Tool Type is Back Bore | 9, 0, 0 |
| TOOL_TYPE_BALL_END_MILL | Mill Tool Type is a Ball End Mill | 9, 0, 0 |
| TOOL_TYPE_BORE | Mill Tool Type is Bore | 9, 0, 0 |
| TOOL_TYPE_CENTER_DRILL | Mill Tool Type is a Center Drill | 9, 0, 0 |
| TOOL_TYPE_COUNTERSINK | Mill Tool Type is a Countersink | 9, 0, 0 |
| TOOL_TYPE_CUTOFF | Lathe Insert Type is Cutoff | 9, 4, 24 |
| TOOL_TYPE_DRILL | Mill Tool Type is a Drill | 9, 0, 0 |
| TOOL_TYPE_FACE_CUTTER | Mill Tool Type is a Face Cutter | 9, 0, 0 |
| TOOL_TYPE_FINISH_END_MILL | Mill Tool Type is a Finish End Mill | 9, 0, 0 |
| TOOL_TYPE_FLY_CUTTER | Mill Tool Type is a Fly Cutter | 9, 0, 0 |
| TOOL_TYPE_FORM | Tool Type is a Form Tool | 9, 4, 24 |
| TOOL_TYPE_GROOVE | Lathe Insert Type is Groove | 9, 4, 24 |
| TOOL_TYPE_KEY_CUTTER | Mill Tool Type is a Ley Cutter | 9, 0, 0 |
| TOOL_TYPE_PENTAGON | Lathe Insert Type is Pentagon | 9, 4, 24 |
| TOOL_TYPE_REAMER | Mill Tool Type is a Reamer | 9, 0, 0 |
| TOOL_TYPE_RECTANGLE | Lathe Insert Type is a Rectangle | 9, 4, 24 |
| TOOL_TYPE_RIGID_TAP | Mill Tool Type is a Rigid Tap | 9, 0, 0 |
| TOOL_TYPE_ROUGH_END_MILL | Mill Tool Type is an Rough End Mill | 9, 0, 0 |
| TOOL_TYPE_ROUND | Lathe Insert Type is a Round | 9, 4, 24 |
| TOOL_TYPE_ROUNDOVER | Mill Tool Type is a Roundover | 9, 0, 0 |
| TOOL_TYPE_SHELL_CUTTER | Mill Tool Type is a Shell Cutter | 9, 0, 0 |
| TOOL_TYPE_SPOT_DRILL | Mill Tool Type is a Spot Drill | 9, 0, 0 |
| TOOL_TYPE_SPOT_FACE | Mill Tool Type is a Spot Face | 9, 0, 0 |
| TOOL_TYPE_SQUARE | Lathe Insert Type is a Square | 9, 4, 24 |
| TOOL_TYPE_TAP | Mill Tool Type is a Tap | 9, 0, 0 |
| TOOL_TYPE_THREAD_MILL | Mill Tool Type is a Thread Mill | 9, 0, 0 |
| TOOL_TYPE_THREAD1 | Lathe Insert Type is a Thread, type 1 | 9, 4, 24 |
| TOOL_TYPE_THREAD2 | Lathe Insert Type is a Thread, type 2 | 9, 4, 24 |
| TOOL_TYPE_TRIANGLE | Lathe Insert Type is a Triangle | 9, 4, 24 |
| TOOL_TYPE_TRIGON | Lathe Insert Type is Trigonometrical | 9, 4, 24 |
| TOOL_TYPE_UTIL | Tool Type is Utility | 9, 4, 24 |
| TOOL_TYPE_VPROFILE | Lathe Insert Type is Vprofile | 9, 0, 0 |
| WG_AXIS_X | Revolve Around X / Extrude along X | 9, 9, 19 |
| WG_AXIS_Y | Revolve Around Y / Extrude along Y | 9, 9, 19 |
| WG_AXIS_Z | Revolve Around Z / Extrude along Z | 9, 9, 19 |
| WG_TYPE_PART_GEO | Type is Geometry | 9, 9, 19 |
| WG_TYPE_PART_STOCK | Type is Stock | 9, 9, 19 |
| WgNumber | Number of WorkGroup created by the NEW_WG command | 9, 4, 25 |
