Voluturn parameter

From Macros Wiki
Revision as of 16:14, 25 February 2022 by MikeONeill (talk | contribs) (Created page with "{| border="1" ! width="400" | Parameter ! width="400" | Description ! width="100" | Version Number |- | Entryclear || Entry Clearance || 22.0.34 |- | ExitClear || Exit Clearan...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search
Parameter Description Version Number
Entryclear Entry Clearance 22.0.34
ExitClear Exit Clearance 22.0.34
Zstart Z Start 22.0.34
RoughDir Rough Direction 22.0.34
Forward 0 or 1 22.0.34
BackAndForth 0 or 1 22.0.34
FinishStock Finish Stock 22.0.34
XRStock XY Stock 22.0.34
ZStock Z Stpck 22.0.34
RPM Spindle Speed 22.0.34
Feedrate Feedrate 22.0.34
HighFeed Hight Feedrate 22.0.34
AutoClear 0 or 1 22.0.34
MaterialOnly 0 or 1 22.0.34
MatOnlyClear Material Only Clearance 22.0.34
CutOtherSide 0 or 1 22.0.34
UseCSS 0 or 1 22.0.34
MaxRPM Maximum spindle Speed 22.0.34
AutoNotchRamp 0 or 1 22.0.34
CheckHolder 0 or 1 22.0.34
HolderClearance Holder Clearance 22.0.34
AvoidPlunging 0 or 1 22.0.34
MinRadRatio Minimum Radius Ratio 22.0.34
MinRadius Minimum Radius 22.0.34
StepDown Step Down Amount 22.0.34
Retrieved from "https://macros.gibbscam.com/index.php?title=Voluturn_parameter&oldid=7413"