All Parameters
From Macros Wiki
| Variable | Description | Used by | Version Number |
| ABS_MOVES | Post output is in absolute | SET_POST_DATA | 9, 0, 0 |
| ADV_ARC_ENTRY_CRC | Advanced entry/exit has CRC checked in radius entry section | SET_PROC_DATA | 9, 5, 13 |
| ADV_ARC_ENTRY_RAD | Advanced entry/exit has radius entry selected | SET_PROC_DATA | 9, 5, 13 |
| ADV_ARC_EXIT_CRC | Advanced entry/exit has CRC checked in radius exit section | SET_PROC_DATA | 9, 5, 13 |
| ADV_ARC_EXIT_RAD | Advanced entry/exit has radius selected in exit section | SET_PROC_DATA | 9, 5, 13 |
| ADV_LINE_ENTRY_CRC | Advanced entry/exit has CRC checked in line entry section | SET_PROC_DATA | 9, 5, 13 |
| ADV_LINE_EXIT_CRC | Advanced entry/exit has CRC checked in line exit section | SET_PROC_DATA | 9, 5, 13 |
| AFR_BLIND_BOTTOM_ADJUST | AFR amount to adjust bottom of blind holes | SET_HOLEFR_PARAM | 9, 5, 14 |
| AFR_CLEAR_PLANE_TOL | AFR clearance plane tolerance | SET_HOLEFR_PARAM | 9, 5, 14 |
| AFR_CS_MODE | AFR CS creation option | SET_HOLEFR_PARAM | 9, 5, 14 |
| AFR_CS1_ORIGIN | AFR CS1 origin option | SET_HOLEFR_PARAM | 9, 5, 14 |
| AFR_MATCH_MODE | AFR match mode | SET_HOLEFR_PARAM | 9, 5, 14 |
| AFR_SELECT_MODE | AFR selection mode | SET_HOLEFR_PARAM | 9, 5, 14 |
| AFR_THRU_BOTTOM_ADJUST | AFR amount to adjust bottom of through holes | SET_HOLEFR_PARAM | 9, 5, 14 |
| AFR_TOP_CLEAR | AFR top clearance amount | SET_HOLEFR_PARAM | 9, 5, 14 |
| AFR_WG_NAME | AFR WorkGroup name; | SET_HOLEFR_PARAM | 9, 5, 14 |
| ALLOY | Material alloy option | SET_PART_DATA | 9, 0, 0 |
| AUTO_CLEAR_ON | Auto clearance is on | SET_PART_DATA | 9, 0, 0 |
| AUTO_CLEAR_VAL | Auto clearance value | SET_PART_DATA | 9, 0, 0 |
| AUTO_ENTRY_CLEAR_RAD | Entry move clear radius | SET_PROC_DATA SET_OP_DATA | 9, 0, 0 |
| AUTO_ENTRY_CP | Entry clear plane height | SET_PROC_DATA SET_OP_DATA | 9, 0, 0 |
| AUTO_EXIT_CLEAR_RAD | Exit move clear radius | SET_PROC_DATA SET_OP_DATA | 9, 0, 0 |
| AUTO_EXIT_CP | Exit clear plane height | SET_PROC_DATA SET_OP_DATA | 9, 0, 0 |
| AUTO_REMOVE | Auto remove option | SET_UTIL_PROC_DATA | 9, 0, 0 |
| AXIS_INFO | Axis info | SET_PROC_DATA | 9, 0, 0 |
| BACK_FORTH | Back and Forth is checked | SET_OP_DATA | 9, 0, 0 |
| BOSS_STOCK | Boss stock amount | SET_PROC_DATA SET_OP_DATA | 9, 3, 9 |
| C_SYNCHED | C Synched is checked | SET_UTIL_PROC_DATA | 9, 0, 0 |
| CHUCK_PART_LEN | SET_POST_DATA | 9, 0, 0 | |
| CHUCK_WIDTH | SET_POST_DATA | 9, 0, 0 | |
| CLEAR_DIA | SET_POST_DATA | 9, 0, 0 | |
| CLEAR_FEED | SET_OP_DATA | 9, 0, 0 | |
| CLEAR_FEED | SET_PROC_DATA | 9, 0, 0 | |
| CLEAR_FEED_LOCK | SET_OP_DATA | 9, 3, 9 | |
| CLEAR_FEED_LOCK | SET_PROC_DATA | 9, 3, 9 | |
| CLEAR_PERIPH | SET_OP_DATA | 9, 3, 9 | |
| CLEAR_PERIPH | SET_PROC_DATA | 9, 3, 9 | |
| CLEAR_RAD | SET_PART_DATA | 9, 0, 0 | |
| CLEAR_RAD | SET_POST_DATA | 9, 0, 0 | |
| CLEAR_Z | SET_POST_DATA | 9, 0, 0 | |
| COMMENT | SET_TOOL_DATA | 9, 0, 0 | |
| COMMENT | SET_OP_DATA | 9, 0, 0 | |
| COMMENT | SET_PROC_DATA | 9, 0, 0 | |
| COMMENT | SET_PART_DATA | 9, 0, 0 | |
| COMMENTS | SET_POST_DATA | 9, 0, 0 | |
| CONTOUR_ENTRY_HELIX_DIA | SET_PROC_DATA | 9, 0, 0 | |
| CONTOUR_ENTRY_HELIX_DIA | SET_OP_DATA | 9, 0, 0 | |
| CONTOUR_ENTRY_HELIX_MAX_CUT | SET_OP_DATA | 9, 0, 0 | |
| CONTOUR_ENTRY_HELIX_MAX_CUT | SET_PROC_DATA | 9, 0, 0 | |
| CONTOUR_ENTRY_HELIX_SLOPE | SET_OP_DATA | 9, 0, 0 | |
| CONTOUR_ENTRY_HELIX_SLOPE | SET_PROC_DATA | 9, 0, 0 | |
| CONTOUR_ENTRY_HELIX_START_Z | SET_OP_DATA | 9, 0, 0 | |
| CONTOUR_ENTRY_HELIX_START_Z | SET_PROC_DATA | 9, 0, 0 | |
| CONTOUR_ENTRY_HELIX_TYPE | SET_PROC_DATA | 9, 3, 9 | |
| CONTOUR_ENTRY_HELIX_TYPE | SET_OP_DATA | 9, 3, 9 | |
| CONTOUR_ENTRY_RAMP_ANGLE | SET_OP_DATA | 9, 0, 0 | |
| CONTOUR_ENTRY_RAMP_ANGLE | SET_PROC_DATA | 9, 0, 0 | |
| CONTOUR_ENTRY_RAMP_MAX_CUT | SET_OP_DATA | 9, 0, 0 | |
| CONTOUR_ENTRY_RAMP_MAX_CUT | SET_PROC_DATA | 9, 0, 0 | |
| CONTOUR_ENTRY_RAMP_SLOPE | SET_OP_DATA | 9, 0, 0 | |
| CONTOUR_ENTRY_RAMP_SLOPE | SET_PROC_DATA | 9, 0, 0 | |
| CONTOUR_ENTRY_RAMP_START_Z | SET_OP_DATA | 9, 0, 0 | |
| CONTOUR_ENTRY_RAMP_START_Z | SET_PROC_DATA | 9, 0, 0 | |
| CONTOUR_ENTRY_RAMP_TYPE | SET_PROC_DATA | 9, 3, 9 | |
| CONTOUR_ENTRY_RAMP_TYPE | SET_OP_DATA | 9, 3, 9 | |
| CONTOUR_FEED | SET_PROC_DATA | 9, 3, 9 | |
| CONTOUR_FEED | SET_OP_DATA | 9, 3, 9 | |
| CONTROL_POINT | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| COOLANT | SET_OP_DATA | 9, 0, 0 | |
| COOLANT | SET_PROC_DATA | 9, 0, 0 | |
| CP1 | SET_OP_DATA | 9, 0, 0 | |
| CP1 | SET_PROC_DATA | 9, 0, 0 | |
| CP1 | SET_PART_DATA | 9, 0, 0 | |
| CRC | SET_PROC_DATA | 9, 0, 0 | |
| CRC_DIR | SET_OP_DATA | 9, 0, 0 | |
| CRC_OFFSET | SET_OP_DATA | 9, 3, 9 | |
| CRC_OFFSET | SET_PROC_DATA | 9, 0, 0 | |
| CRC_SIDE | SET_OP_DATA | 9, 0, 0 | |
| CS | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| CS_NUM | SET_OP_DATA | 9, 0, 0 | |
| CS_NUM | SET_PROC_DATA | 9, 3, 9 | |
| CSS | SET_OP_DATA | 9, 0, 0 | |
| CSS | SET_OP_DATA | 9, 0, 0 | |
| CURVE_CUT_DIR | SET_PROC_DATA | 9, 0, 0 | |
| CURVE_TOL | SET_PROC_DATA | 9, 0, 0 | |
| CURVE_TOLERANCE | SET_OP_DATA | 9, 0, 0 | |
| CUSTOM_CBSET | SET_PROC_DATA | 9, 3, 9 | |
| CUT_ANGLE | SET_OP_DATA | 9, 0, 0 | |
| CUT_ANGLE | SET_PROC_DATA | 9, 0, 0 | |
| CUT_BACK | SET_OP_DATA | 9, 3, 9 | |
| CUT_BACK | SET_PROC_DATA | 9, 3, 9 | |
| CUT_SIDE | SET_OP_DATA | 9, 3, 9 | |
| CUT_SIDE | SET_PROC_DATA | 9, 3, 9 | |
| CUT_TOL | SET_OP_DATA | 9, 0, 0 | |
| CUT_TYPE | SET_OP_DATA | 9, 0, 0 | |
| CUT_TYPE | SET_PROC_DATA | 9, 0, 0 | |
| CUT_WIDTH | SET_PROC_DATA | 9, 3, 9 | |
| CUT_WIDTH | SET_OP_DATA | 9, 3, 9 | |
| DEPTH | SET_OP_DATA | 9, 0, 0 | |
| DEPTH_FIRST | SET_OP_DATA | 9, 3, 9 | |
| DEPTH_FIRST | SET_PROC_DATA | 9, 3, 9 | |
| DRAFT_ANGLE | SET_TOOL_DATA | 9, 0, 0 | |
| DRILL_BORE_PULLOFF | SET_OP_DATA | 9, 0, 0 | |
| DRILL_BORE_PULLOFF | SET_PROC_DATA | 9, 0, 0 | |
| DRILL_CB_END_RIZ | SET_OP_DATA | 9, 0, 0 | |
| DRILL_CB_START_RIZ | SET_OP_DATA | 9, 0, 0 | |
| DRILL_CLEAR_PLANE | SET_OP_DATA | 9, 0, 0 | |
| DRILL_CLEAR_PLANE | SET_PROC_DATA | 9, 3, 9 | |
| DRILL_CLEAR_PLANE | SET_OP_DATA | 9, 3, 9 | |
| DRILL_CLEAR_PLANE_LOC_CS | SET_OP_DATA | 9, 0, 0 | |
| DRILL_DWELL | SET_OP_DATA | 9, 0, 0 | |
| DRILL_DWELL | SET_PROC_DATA | 9, 0, 0 | |
| DRILL_FEED | SET_PROC_DATA | 9, 0, 0 | |
| DRILL_PECK_AMOUNT | SET_OP_DATA | 9, 0, 0 | |
| DRILL_PECK_AMOUNT | SET_PROC_DATA | 9, 0, 0 | |
| DRILL_PECK_CLEARANCE | SET_OP_DATA | 9, 0, 0 | |
| DRILL_PECK_CLEARANCE | SET_PROC_DATA | 9, 0, 0 | |
| DRILL_PECK_RETRACT | SET_OP_DATA | 9, 0, 0 | |
| DRILL_PECK_RETRACT | SET_PROC_DATA | 9, 0, 0 | |
| DRILL_POS_APPROACH | SET_OP_DATA | 9, 3, 9 | |
| DRILL_POS_APPROACH | SET_PROC_DATA | 9, 3, 9 | |
| DRILL_TAP_PERCENT | SET_OP_DATA | 9, 0, 0 | |
| DRILL_TAP_PERCENT | SET_PROC_DATA | 9, 0, 0 | |
| DRILL_TYPE | SET_OP_DATA | 9, 3, 9 | |
| DRILL_TYPE | SET_PROC_DATA | 9, 3, 9 | |
| ENTRY_CLEAR | SET_PROC_DATA | 9, 3, 9 | |
| ENTRY_CLEAR | SET_OP_DATA | 9, 3, 9 | |
| ENTRY_FEED | SET_PROC_DATA | 9, 3, 9 | |
| ENTRY_FEED | SET_OP_DATA | 9, 3, 9 | |
| ENTRY_LINE | SET_PROC_DATA | 9, 3, 9 | |
| ENTRY_LINE_LEN | SET_OP_DATA | 9, 0, 0 | |
| ENTRY_PERP | SET_OP_DATA | 9, 0, 0 | |
| ENTRY_PERP | SET_PROC_DATA | 9, 3, 9 | |
| ENTRY_RAD | SET_OP_DATA | 9, 3, 9 | |
| ENTRY_RAD | SET_PROC_DATA | 9, 3, 9 | |
| ENTRY_TYPE | SET_OP_DATA | 9, 3, 9 | |
| ENTRY_TYPE | SET_PROC_DATA | 9, 3, 9 | |
| EXIT_CLEAR | SET_PROC_DATA | 9, 3, 9 | |
| EXIT_CLEAR | SET_OP_DATA | 9, 3, 9 | |
| EXIT_LINE | SET_PROC_DATA | 9, 3, 9 | |
| EXIT_LINE_LEN | SET_OP_DATA | 9, 0, 0 | |
| EXIT_PERP | SET_OP_DATA | 9, 3, 9 | |
| EXIT_PERP | SET_PROC_DATA | 9, 3, 9 | |
| EXIT_RAD | SET_OP_DATA | 9, 3, 9 | |
| EXIT_RAD | SET_PROC_DATA | 9, 3, 9 | |
| FAMILY | SET_PART_DATA | 9, 0, 0 | |
| FEED_CONNECT | SET_OP_DATA | 9, 0, 0 | |
| FEED_CONNECT | SET_PROC_DATA | 9, 3, 9 | |
| FEED_DISTANCE | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| FEEDRATE | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| FLOW | SET_OP_DATA | 9, 0, 0 | |
| FLOW_NUM | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| FM_BACK_AND_FORTH | SET_PROC_DATA | 9, 3, 9 | |
| FM_BEFORE_ZIGZAG | SET_PROC_DATA | 9, 3, 9 | |
| FM_CLEAR | SET_OP_DATA | 9, 0, 0 | |
| FM_CLEAR | SET_PROC_DATA | 9, 0, 0 | |
| FM_CUT_WIDTH | SET_OP_DATA | 9, 0, 0 | |
| FM_CUT_WIDTH | SET_PROC_DATA | 9, 0, 0 | |
| FM_HPLUS | SET_OP_DATA | 9, 3, 9 | |
| FM_HPLUS | SET_PROC_DATA | 9, 3, 9 | |
| FM_MOVEH | SET_OP_DATA | 9, 3, 9 | |
| FM_MOVEH | SET_PROC_DATA | 9, 3, 9 | |
| FM_TYPE | SET_OP_DATA | 9, 3, 9 | |
| FM_TYPE | SET_PROC_DATA | 9, 3, 9 | |
| FM_USE_SHAPE | SET_OP_DATA | 9, 3, 9 | |
| FM_USE_SHAPE | SET_PROC_DATA | 9, 3, 9 | |
| FM_VPLUS | SET_OP_DATA | 9, 3, 9 | |
| FM_VPLUS | SET_PROC_DATA | 9, 3, 9 | |
| FORM_SHAPE_REF | SET_TOOL_DATA | 9, 5, 13 | |
| FORWARD | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| FROM_WORKPIECE | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| FULL_DIA | SET_OP_DATA | 9, 3, 9 | |
| FULL_DIA | SET_PROC_DATA | 9, 3, 9 | |
| FULL_RETURN | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| GEO_RAD | SET_OP_DATA | 9, 0, 0 | |
| GEO_RAD | SET_PROC_DATA | 9, 0, 0 | |
| GRAPHIC_PART_DIST_ON | SET_PART_DATA | 9, 0, 0 | |
| GRAPHIC_PART_DIST_VAL | SET_PART_DATA | 9, 0, 0 | |
| GRIP_Z | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| GROUP_ANG_TOL | SET_HOLEFR_PARAM | 9, 5, 14 | |
| GROUP_KEEP | SET_HOLEFR_PARAM | 9, 5, 14 | |
| GROUP_LIN_TOL | SET_HOLEFR_PARAM | 9, 5, 14 | |
| GROUP_MODE | SET_HOLEFR_PARAM | 9, 5, 14 | |
| GROUP_SAME_BOTTOM_Z | SET_HOLEFR_PARAM | 9, 5, 14 | |
| GROUP_SAME_CS | SET_HOLEFR_PARAM | 9, 5, 14 | |
| GROUP_SAME_DIA | SET_HOLEFR_PARAM | 9, 5, 14 | |
| GROUP_SAME_MID_Z | SET_HOLEFR_PARAM | 9, 5, 14 | |
| GROUP_SAME_TOP_Z | SET_HOLEFR_PARAM | 9, 5, 14 | |
| GROUP_SAME_TYPE | SET_HOLEFR_PARAM | 9, 5, 14 | |
| HARDNESS | SET_PART_DATA | 9, 0, 0 | |
| HIT_FLATS | SET_OP_DATA | 9, 3, 9 | |
| HIT_FLATS | SET_PROC_DATA | 9, 3, 9 | |
| HIT_PARALLEL | SET_OP_DATA | 9, 3, 9 | |
| HIT_PARALLEL | SET_PROC_DATA | 9, 3, 9 | |
| HOLDER_SHAPE_REF | SET_TOOL_DATA | 9, 0, 0 | |
| HOLDER_SOLID_REF | SET_TOOL_DATA | 9, 0, 0 | |
| ID | SET_TOOL_DATA | 9, 0, 0 | |
| IGNORE_TOOLS | SET_OP_DATA | 9, 3, 9 | |
| IGNORE_TOOLS | SET_PROC_DATA | 9, 3, 9 | |
| INITIAL_FACE_Z | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| INTER_OP_OVERRIDE | SET_OP_DATA | 9, 0, 0 | |
| INTER_PART_FULL_UP | SET_POST_DATA | 9, 0, 0 | |
| INTERSECT_CLEANUP_FROM | SET_OP_DATA | 9, 0, 0 | |
| INTERSECT_CUTS_TYPE | SET_OP_DATA | 9, 0, 0 | |
| INTERSECT_PASS_TYPE | SET_OP_DATA | 9, 0, 0 | |
| INTERSECT_PASSES_PER_SIDE | SET_OP_DATA | 9, 0, 0 | |
| INTERSECT_TYPE | SET_OP_DATA | 9, 0, 0 | |
| LATHE_CANNED_AUTOFIN | SET_OP_DATA | 9, 0, 0 | |
| LATHE_CLEAR_ID | SET_PROC_DATA | 9, 0, 0 | |
| LATHE_CUT_DIR | SET_OP_DATA | 9, 0, 0 | |
| LATHE_CUT_OFF | SET_OP_DATA | 9, 0, 0 | |
| LATHE_CUT_OTHER_SIDE | SET_OP_DATA | 9, 4, 12 | |
| LATHE_CUT_OTHER_SIDE | SET_PROC_DATA | 9, 4, 12 | |
| LATHE_CUT_WIDTH | SET_OP_DATA | 9, 0, 0 | |
| LATHE_DEPTH | SET_OP_DATA | 9, 0, 0 | |
| LATHE_MAX_RPM | SET_OP_DATA | 9, 0, 0 | |
| LATHE_NO_DRAG | SET_OP_DATA | 9, 0, 0 | |
| LATHE_OD_ID_FACE | SET_OP_DATA | 9, 0, 0 | |
| LATHE_PAT_SHIFT_FIXED_SRT | SET_OP_DATA | 9, 0, 0 | |
| LATHE_PAT_SHIFT_PASSES | SET_OP_DATA | 9, 0, 0 | |
| LATHE_PATTERN_SHIFT_CUT | SET_OP_DATA | 9, 0, 0 | |
| LATHE_PATTERN_SHIFT_POINT | SET_OP_DATA | 9, 0, 0 | |
| LATHE_PLUNGE_CENTER_OUT | SET_OP_DATA | 9, 0, 0 | |
| LATHE_PLUNGE_CUT_TYPE | SET_OP_DATA | 9, 0, 0 | |
| LATHE_PLUNGE_ENTRY_TYPE | SET_OP_DATA | 9, 0, 0 | |
| LATHE_PLUNGE_TYPE | SET_OP_DATA | 9, 0, 0 | |
| LATHE_PREFER_CANNED | SET_OP_DATA | 9, 0, 0 | |
| LATHE_PREFER_CANNED | SET_PROC_DATA | 9, 0, 0 | |
| LATHE_PULL_OFF_WALL | SET_OP_DATA | 9, 0, 0 | |
| LATHE_ROUGH_TYPE | SET_OP_DATA | 9, 0, 0 | |
| LATHE_SQUARE_CORNERS | SET_OP_DATA | 9, 0, 0 | |
| LATHE_SURFACE_Z | SET_OP_DATA | 9, 0, 0 | |
| LATHE_TYPE | SET_OP_DATA | 9, 0, 0 | |
| LATHE_TYPE | SET_PROC_DATA | 9, 0, 0 | |
| LATHE_USE_AUTO_CLEAR | SET_PROC_DATA | 9, 4, 12 | |
| LATHE_XZ_STOCK | SET_OP_DATA | 9, 0, 0 | |
| LDRILL_CLEARANCE | SET_PROC_DATA | 9, 0, 0 | |
| LDRILL_DWELL | SET_PROC_DATA | 9, 0, 0 | |
| LDRILL_ENTRY | SET_PROC_DATA | 9, 3, 9 | |
| LDRILL_FEED | SET_PROC_DATA | 9, 0, 0 | |
| LDRILL_PECK | SET_PROC_DATA | 9, 0, 0 | |
| LDRILL_RETRACT | SET_PROC_DATA | 9, 0, 0 | |
| LDRILL_SURFACE_Z | SET_PROC_DATA | 9, 0, 0 | |
| LDRILL_TAP_PERCENT | SET_PROC_DATA | 9, 0, 0 | |
| LDRILL_TIP_Z | SET_PROC_DATA | 9, 0, 0 | |
| LEN_OFFSET | SET_OP_DATA | 9, 0, 0 | |
| LEN_OFFSET | SET_PROC_DATA | 9, 3, 9 | |
| LENGTH | SET_OP_DATA | 9, 0, 0 | |
| LLTOOL_THICK | SET_TOOL_DATA | 9, 0, 0 | |
| LOCATION | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| LOCKS | SET_OP_DATA | 9, 0, 0 | |
| LPLUNGE_ANGLE | SET_OP_DATA | 9, 0, 0 | |
| LPLUNGE_FEED_PERCENT | SET_OP_DATA | 9, 0, 0 | |
| LPLUNGE_MAX_CUT | SET_OP_DATA | 9, 0, 0 | |
| LPLUNGE_PECK_AMOUNT | SET_OP_DATA | 9, 0, 0 | |
| LPLUNGE_PECK_CLEARANCE | SET_OP_DATA | 9, 0, 0 | |
| LPLUNGE_PECK_RETRACT | SET_OP_DATA | 9, 0, 0 | |
| LROUGH_AUTO_FINISH | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_AUTO_FINISH_FEED | SET_PROC_DATA | 9, 3, 9 | |
| LROUGH_AUTOFIN | SET_OP_DATA | 9, 0, 0 | |
| LROUGH_AVOID_AIR | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_BACK_AND_FORTH | SET_PROC_DATA | 9, 5, 13 | |
| LROUGH_CENTER_OUT | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_CLEANUP_PASS | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_CLEARANCE | SET_PROC_DATA | 9, 3, 9 | |
| LROUGH_CONSTANT_PATH | SET_OP_DATA | 9, 0, 0 | |
| LROUGH_CONSTANT_PATH | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_CONSTANT_STEP | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_CONTOUR_FEED | SET_PROC_DATA | 9, 3, 9 | |
| LROUGH_CSS | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_CUT_DIR | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_CUT_OFF | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_CUT_WIDTH | SET_OP_DATA | 9, 0, 0 | |
| LROUGH_CUT_WIDTH | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_CUT_X | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_CUT_Z | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_CYCLE_SP_X | SET_PROC_DATA | 9, 5, 13 | |
| LROUGH_CYCLE_SP_Z | SET_PROC_DATA | 9, 5, 13 | |
| LROUGH_DEFLECT_COMP_VAL | SET_PROC_DATA | 9, 4, 12 | |
| LROUGH_DIR_FWD | SET_PROC_DATA | 9, 5, 13 | |
| LROUGH_ENTRY_FEED | SET_PROC_DATA | 9, 3, 9 | |
| LROUGH_ENTRY_LINE | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_ENTRY_LINE | SET_OP_DATA | 9, 3, 9 | |
| LROUGH_ENTRY_PERP | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_ENTRY_RAD | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_ENTRY_RAD | SET_OP_DATA | 9, 3, 9 | |
| LROUGH_EXIT_LINE | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_EXIT_LINE | SET_OP_DATA | 9, 3, 9 | |
| LROUGH_EXIT_PERP | SET_OP_DATA | 9, 0, 0 | |
| LROUGH_EXIT_PERP | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_EXIT_RAD | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_EXIT_RAD | SET_OP_DATA | 9, 3, 9 | |
| LROUGH_FEED | SET_PROC_DATA | 9, 3, 9 | |
| LROUGH_FEED_PERCENT | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_FINISH_LAST | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_FIXED_SP | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_MAX_RPM | SET_PROC_DATA | 9, 3, 9 | |
| LROUGH_MIN_RAD | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_MIN_RAD | SET_OP_DATA | 9, 3, 9 | |
| LROUGH_MONOTONIC | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_MULTI_PASS | SET_PROC_DATA | 9, 4, 12 | |
| LROUGH_NUM_PASSES | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_OFFSET_CUT_DEPTH | SET_PROC_DATA | 9, 5, 13 | |
| LROUGH_PECK | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_PECK | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_PLUNGE_ANGLE | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_PLUNGE_FIRST | SET_PROC_DATA | 9, 5, 13 | |
| LROUGH_PLUNGE_TYPE | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_PLUNGE_TYPE | SET_PROC_DATA | 9, 5, 13 | |
| LROUGH_RAMP_ANGLE | SET_OP_DATA | 9, 0, 0 | |
| LROUGH_RAMP_ANGLE | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_RAPID_STEP | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_RETRACT | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_ROUGH_START | SET_PROC_DATA | 9, 3, 9 | |
| LROUGH_ROUGH_TYPE | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_ROUND_CORNERS | SET_OP_DATA | 9, 0, 0 | |
| LROUGH_ROUND_CORNERS | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_SFPM | SET_PROC_DATA | 9, 3, 9 | |
| LROUGH_SHIFT_CUT_WIDTH | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_SHIFT_SQUARE_CORNERS | SET_PROC_DATA | 9, 5, 13 | |
| LROUGH_SPINDLE_DIR | SET_OP_DATA | 9, 0, 0 | |
| LROUGH_SPINDLE_DIR | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_START | SET_OP_DATA | 9, 0, 0 | |
| LROUGH_START_SIDE_EXT | SET_PROC_DATA | 9, 5, 13 | |
| LROUGH_STOCK | SET_PROC_DATA | 9, 3, 9 | |
| LROUGH_STOCK_X | SET_PROC_DATA | 9, 3, 9 | |
| LROUGH_STOCK_Z | SET_PROC_DATA | 9, 3, 9 | |
| LROUGH_TURN_CUT_WIDTH | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_USE_DEFLECT_COMP | SET_PROC_DATA | 9, 4, 12 | |
| LROUGH_XMINUS | SET_OP_DATA | 9, 0, 0 | |
| LROUGH_XMINUS | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_XPLUS | SET_OP_DATA | 9, 0, 0 | |
| LROUGH_XPLUS | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_ZMINUS | SET_OP_DATA | 9, 0, 0 | |
| LROUGH_ZMINUS | SET_PROC_DATA | 9, 0, 0 | |
| LROUGH_ZPLUS | SET_OP_DATA | 9, 0, 0 | |
| LROUGH_ZPLUS | SET_PROC_DATA | 9, 0, 0 | |
| LTHREAD_ALTERNATE | SET_OP_DATA | 9, 0, 0 | |
| LTHREAD_ALTERNATE | SET_PROC_DATA | 9, 3, 9 | |
| LTHREAD_ANGLE | SET_OP_DATA | 9, 0, 0 | |
| LTHREAD_ANGLE_ALT | SET_OP_DATA | 9, 0, 0 | |
| LTHREAD_BALANCED | SET_OP_DATA | 9, 0, 0 | |
| LTHREAD_BALANCED_IN_FEED | SET_PROC_DATA | 9, 3, 9 | |
| LTHREAD_CSS | SET_PROC_DATA | 9, 3, 9 | |
| LTHREAD_CUT_DEPTH | SET_PROC_DATA | 9, 0, 0 | |
| LTHREAD_CUT_DIR | SET_PROC_DATA | 9, 3, 9 | |
| LTHREAD_CUT_TYPE | SET_PROC_DATA | 9, 3, 9 | |
| LTHREAD_FIRST_CUT | SET_OP_DATA | 9, 0, 0 | |
| LTHREAD_HEIGHT_XR | SET_OP_DATA | 9, 0, 0 | |
| LTHREAD_LAST_CUT | SET_OP_DATA | 9, 0, 0 | |
| LTHREAD_LAST_CUT | SET_PROC_DATA | 9, 0, 0 | |
| LTHREAD_LAST_CUT | SET_PROC_DATA | 9, 0, 0 | |
| LTHREAD_LAST_CUT | SET_OP_DATA | 9, 3, 9 | |
| LTHREAD_MAJOR_DIA | SET_OP_DATA | 9, 0, 0 | |
| LTHREAD_MAJOR_DIA | SET_PROC_DATA | 9, 0, 0 | |
| LTHREAD_MAX_RPM | SET_PROC_DATA | 9, 0, 0 | |
| LTHREAD_MINOR_DIA | SET_PROC_DATA | 9, 0, 0 | |
| LTHREAD_MINOR_XD | SET_OP_DATA | 9, 0, 0 | |
| LTHREAD_NOM_PITCH_INDEX | SET_OP_DATA | 9, 0, 0 | |
| LTHREAD_NOMINAL | SET_OP_DATA | 9, 0, 0 | |
| LTHREAD_NOMINAL_PITCH_INDEX | SET_PROC_DATA | 9, 3, 9 | |
| LTHREAD_NOMINAL_XD | SET_PROC_DATA | 9, 0, 0 | |
| LTHREAD_NUM_SPRING_PASSES | SET_PROC_DATA | 9, 3, 9 | |
| LTHREAD_NUM_STARTS | SET_PROC_DATA | 9, 3, 9 | |
| LTHREAD_PITCH | SET_OP_DATA | 9, 0, 0 | |
| LTHREAD_PITCH | SET_PROC_DATA | 9, 0, 0 | |
| LTHREAD_RUN_IN | SET_OP_DATA | 9, 0, 0 | |
| LTHREAD_RUN_OUT | SET_OP_DATA | 9, 0, 0 | |
| LTHREAD_SFPM | SET_PROC_DATA | 9, 0, 0 | |
| LTHREAD_SLOPE | SET_OP_DATA | 9, 0, 0 | |
| LTHREAD_STARTS | SET_OP_DATA | 9, 0, 0 | |
| LTHREAD_STYLE | SET_PROC_DATA | 9, 3, 9 | |
| LTHREAD_STYPE | SET_OP_DATA | 9, 0, 0 | |
| LTHREAD_TAPER | SET_PROC_DATA | 9, 0, 0 | |
| LTHREAD_TAPER_INDEX | SET_PROC_DATA | 9, 3, 9 | |
| LTHREAD_THREAD_ANGLE | SET_PROC_DATA | 9, 0, 0 | |
| LTHREAD_THREAD_HEIGHT | SET_PROC_DATA | 9, 0, 0 | |
| LTHREAD_TPI | SET_OP_DATA | 9, 0, 0 | |
| LTHREAD_TYPE | SET_OP_DATA | 9, 0, 0 | |
| LTHREAD_X_END_EXTEND | SET_PROC_DATA | 9, 0, 0 | |
| LTHREAD_X_START_EXTEND | SET_PROC_DATA | 9, 0, 0 | |
| LTHREAD_Z_END | SET_OP_DATA | 9, 0, 0 | |
| LTHREAD_Z_END | SET_PROC_DATA | 9, 0, 0 | |
| LTHREAD_Z_END_EXTEND | SET_PROC_DATA | 9, 0, 0 | |
| LTHREAD_Z_START | SET_OP_DATA | 9, 0, 0 | |
| LTHREAD_Z_START | SET_PROC_DATA | 9, 0, 0 | |
| LTHREAD_Z_START_EXTEND | SET_PROC_DATA | 9, 0, 0 | |
| LTOOL_B_AXIS | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_CUT_SIDE | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_DIA_RELIEF | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_FACE_ANGLE | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_FACE_RELIEF | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_FACE_UP | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_HOLDER | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_HOLDER_THICKNESS | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_INSERT_ANGLE | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_ISIZE | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_LENGTH | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_MID_ANGLE | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_OFFSET | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_ORIENTATION | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_OTHER | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_PRESET_PT_X | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_PRESET_PT_Z | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_SIDE_ANGLE | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_SIZE | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_THREAD_DIR | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_THREAD_EDGE_POS_X | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_THREAD_EDGE_POS_Z | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_THREAD_FLAT_LEN | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_THREAD_ID_OD | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_THREAD_INSERT_WIDTH | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_THREAD_PITCH | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_THREAD_STYLE | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_THREAD_TYPE | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_TIP_ANGLE | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_TIP_CENTER_TO_PRESET_X | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_TIP_CENTER_TO_PRESET_Z | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_TIP_OFFSET | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_TIP_RAD | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_TIP_WIDTH | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_TURRET_SHIFT_X | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_TURRET_SHIFT_Z | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_TYPE | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_UTIL_ANGLE | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_UTIL_DIA | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_UTIL_LEN | SET_TOOL_DATA | 9, 0, 0 | |
| LTOOL_WIDTH | SET_TOOL_DATA | 9, 0, 0 | |
| M_USE_ADV_TOL | SET_PROC_DATA | 9, 3, 9 | |
| M_USE_ADV_TOL | SET_OP_DATA | 9, 3, 9 | |
| M_ZSHIFT | SET_OP_DATA | 9, 0, 0 | |
| MACH_ENGINE | SET_OP_DATA | 9, 0, 0 | |
| MACH_FLOWS | SET_PART_DATA | 9, 0, 0 | |
| MACHINE_MODE | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| MATERIAL | SET_TOOL_DATA | 9, 0, 0 | |
| MATERIAL_ONLY | SET_OP_DATA | 9, 0, 0 | |
| MATERIAL_ONLY | SET_PROC_DATA | 9, 3, 9 | |
| MATERIAL_ONLY_CLEARANCE | SET_OP_DATA | 9, 0, 0 | |
| MD_FROM_TOOL | SET_PROC_DATA | 9, 3, 9 | |
| MD_FROM_TOOL | SET_OP_DATA | 9, 3, 9 | |
| MD_PROCESS_LOAD_H1Z_FEAT | SET_PROC_DATA | 9, 3, 9 | |
| MD_RETRACT_LEVEL | SET_PROC_DATA | 9, 3, 9 | |
| MD_RETRACT_LEVEL | SET_OP_DATA | 9, 3, 9 | |
| MD_VARY_WITH_FEAT | SET_PROC_DATA | 9, 3, 9 | |
| MD_VARY_WITH_FEAT | SET_OP_DATA | 9, 3, 9 | |
| MD_VARY_WITH_GEO | SET_PROC_DATA | 9, 3, 9 | |
| MD_VARY_WITH_GEO | SET_OP_DATA | 9, 3, 9 | |
| MDD_FILE | SET_PART_DATA | 9, 0, 0 | |
| MDD_NAME | SET_PART_DATA | 9, 0, 0 | |
| METRIC_OUTPUT | SET_POST_DATA | 9, 0, 0 | |
| MFIX_TOL | SET_PROC_DATA | 9, 0, 0 | |
| MFIXTURE_TOL | SET_OP_DATA | 9, 0, 0 | |
| MFIXTURE_TOL | SET_PROC_DATA | 9, 0, 0 | |
| MILL_TYPE | SET_OP_DATA | 9, 0, 0 | |
| MILL_TYPE | SET_PROC_DATA | 9, 0, 0 | |
| MIN_CUT | SET_OP_DATA | 9, 0, 0 | |
| MIN_CUT | SET_PROC_DATA | 9, 0, 0 | |
| MIN_RAD | SET_PROC_DATA | 9, 0, 0 | |
| MIN_RAD | SET_OP_DATA | 9, 0, 0 | |
| MINIMIZE | SET_POST_DATA | 9, 0, 0 | |
| MSTOCK_TOL | SET_PROC_DATA | 9, 0, 0 | |
| MSURF_CLEAR | SET_OP_DATA | 9, 0, 0 | |
| MSURF_CLEAR | SET_PROC_DATA | 9, 0, 0 | |
| MSURF_STOCK_TOL | SET_OP_DATA | 9, 0, 0 | |
| MSURFACE_CLEAR | SET_PROC_DATA | 9, 0, 0 | |
| MTHREAD_CLEAR_DIA | SET_PROC_DATA | 9, 0, 0 | |
| MTHREAD_CLEAR_DIA | SET_OP_DATA | 9, 3, 9 | |
| MTHREAD_CUT_DIA | SET_PROC_DATA | 9, 0, 0 | |
| MTHREAD_CUT_DIA | SET_OP_DATA | 9, 3, 9 | |
| MTHREAD_END_THREAD | SET_PROC_DATA | 9, 0, 0 | |
| MTHREAD_END_THREAD | SET_OP_DATA | 9, 3, 9 | |
| MTHREAD_FEED | SET_PROC_DATA | 9, 0, 0 | |
| MTHREAD_FEED | SET_OP_DATA | 9, 3, 9 | |
| MTHREAD_ID_OD | SET_OP_DATA | 9, 0, 0 | |
| MTHREAD_ID_OD | SET_PROC_DATA | 9, 0, 0 | |
| MTHREAD_PITCH | SET_PROC_DATA | 9, 0, 0 | |
| MTHREAD_PITCH | SET_OP_DATA | 9, 3, 9 | |
| MTHREAD_RAPID_IN | SET_PROC_DATA | 9, 0, 0 | |
| MTHREAD_START_THREAD | SET_PROC_DATA | 9, 0, 0 | |
| MTHREAD_START_THREAD | SET_OP_DATA | 9, 3, 9 | |
| MTHREAD_THREAD_DIR | SET_OP_DATA | 9, 0, 0 | |
| MTHREAD_THREAD_DIR | SET_PROC_DATA | 9, 0, 0 | |
| MTHREAD_TRAVERSE_CP1 | SET_OP_DATA | 9, 0, 0 | |
| MTHREAD_TRAVERSE_CP1 | SET_PROC_DATA | 9, 0, 0 | |
| MTOOL_BOTTOM_RAD | SET_TOOL_DATA | 9, 0, 0 | |
| MTOOL_CORNER_RAD | SET_TOOL_DATA | 9, 0, 0 | |
| MTOOL_FLUT_LENGTH | SET_TOOL_DATA | 9, 0, 0 | |
| MTOOL_INNER_TOP_CORNER_RAD | SET_TOOL_DATA | 9, 0, 0 | |
| MTOOL_LEAD_TIP | SET_TOOL_DATA | 9, 0, 0 | |
| MTOOL_LEN_OFFSET | SET_TOOL_DATA | 9, 0, 0 | |
| MTOOL_LENGTH | SET_TOOL_DATA | 9, 0, 0 | |
| MTOOL_NUM_FLUTES | SET_TOOL_DATA | 9, 0, 0 | |
| MTOOL_OPTIONS | SET_TOOL_DATA | 9, 0, 0 | |
| MTOOL_ORIENTATION | SET_TOOL_DATA | 9, 0, 0 | |
| MTOOL_OUT_OF_HOLDER_LEN | SET_TOOL_DATA | 9, 4, 24 | |
| MTOOL_PITCH_TPI | SET_TOOL_DATA | 9, 0, 0 | |
| MTOOL_PRESET_X | SET_TOOL_DATA | 9, 0, 0 | |
| MTOOL_PRESET_Y | SET_TOOL_DATA | 9, 0, 0 | |
| MTOOL_PRESET_Z | SET_TOOL_DATA | 9, 0, 0 | |
| MTOOL_PRESET_Z | SET_TOOL_DATA | 9, 0, 0 | |
| MTOOL_RADIUS | SET_TOOL_DATA | 9, 0, 0 | |
| MTOOL_SHANK_RAD | SET_TOOL_DATA | 9, 0, 0 | |
| MTOOL_TC_SHIFT_X | SET_TOOL_DATA | 9, 0, 0 | |
| MTOOL_TC_SHIFT_Y | SET_TOOL_DATA | 9, 0, 0 | |
| MTOOL_TC_SHIFT_Z | SET_TOOL_DATA | 9, 0, 0 | |
| MTOOL_TIP_ANGLE | SET_TOOL_DATA | 9, 0, 0 | |
| MTOOL_TIP_RAD | SET_TOOL_DATA | 9, 0, 0 | |
| MTOOL_TOP_CORNER_RAD | SET_TOOL_DATA | 9, 0, 0 | |
| MTOOL_TOP_RAD | SET_TOOL_DATA | 9, 0, 0 | |
| MTOOL_TYPE | SET_TOOL_DATA | 9, 0, 0 | |
| MZSHIFT | SET_PROC_DATA | 9, 0, 0 | |
| NON_CUT_DIA | SET_TOOL_DATA | 9, 0, 0 | |
| NUM_FLOWS | SET_PART_DATA | 9, 0, 0 | |
| NUM_PARTS | SET_POST_DATA | 9, 0, 0 | |
| NUM_REPEATS | SET_OP_DATA | 9, 0, 0 | |
| NUM_SPINDLES | SET_PART_DATA | 9, 0, 0 | |
| NUM_SPRING_PASSES | SET_OP_DATA | 9, 0, 0 | |
| NUM_TOOL_GROUPS | SET_PART_DATA | 9, 0, 0 | |
| OD_ID_FACE | SET_OP_DATA | 9, 0, 0 | |
| OFFSET | SET_TOOL_DATA | 9, 0, 0 | |
| ONE_PART_ALL_TOOLS | SET_POST_DATA | 9, 0, 0 | |
| OP_END | SET_OP_DATA | 9, 0, 0 | |
| OP_START | SET_OP_DATA | 9, 0, 0 | |
| OP_STOPS | SET_POST_DATA | 9, 0, 0 | |
| OPEN_CLEARANCE | SET_PROC_DATA | 9, 3, 9 | |
| OPEN_CLEARANCE | SET_OP_DATA | 9, 3, 9 | |
| ORIENTATION | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| OUTPUT_FILE | SET_POST_DATA | 9, 0, 0 | |
| OVERHANG | SET_PROC_DATA | 9, 3, 9 | |
| OVERHANG | SET_OP_DATA | 9, 3, 9 | |
| OVERLAP | SET_PROC_DATA | 9, 3, 9 | |
| OVERLAP | SET_OP_DATA | 9, 3, 9 | |
| PART_FILE | SET_PART_DATA | 9, 0, 0 | |
| PART_IN_MAIN | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| PART_IN_SUB | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| PART_NAME | SET_PART_DATA | 9, 0, 0 | |
| PART_SPACING_X | SET_POST_DATA | 9, 0, 0 | |
| PART_SPACING_Y | SET_POST_DATA | 9, 0, 0 | |
| PART_SPACING_Z | SET_POST_DATA | 9, 0, 0 | |
| PAST_STOCK | SET_OP_DATA | 9, 0, 0 | |
| PAST_STOCK | SET_PROC_DATA | 9, 0, 0 | |
| PATH_CS | SET_OP_DATA | 9, 0, 0 | |
| PATH_CS | SET_PROC_DATA | 9, 3, 9 | |
| PATTERN_INDEX | SET_OP_DATA | 9, 3, 9 | |
| PATTERN_INDEX | SET_PROC_DATA | 9, 3, 9 | |
| PATTERN_ON | SET_OP_DATA | 9, 3, 9 | |
| PATTERN_ON | SET_PROC_DATA | 9, 3, 9 | |
| POCKET_ENTRY_HELIX_ANGLE | SET_OP_DATA | 9, 0, 0 | |
| POCKET_ENTRY_HELIX_ANGLE | SET_PROC_DATA | 9, 0, 0 | |
| POCKET_ENTRY_HELIX_CP | SET_OP_DATA | 9, 0, 0 | |
| POCKET_ENTRY_HELIX_CP | SET_PROC_DATA | 9, 0, 0 | |
| POCKET_ENTRY_HELIX_DIA | SET_OP_DATA | 9, 0, 0 | |
| POCKET_ENTRY_HELIX_DIA | SET_PROC_DATA | 9, 0, 0 | |
| POCKET_ENTRY_HELIX_MAX_CUT | SET_PROC_DATA | 9, 0, 0 | |
| POCKET_ENTRY_HELIX_MAX_CUT | SET_OP_DATA | 9, 0, 0 | |
| POCKET_ENTRY_HELIX_SLOPE | SET_PROC_DATA | 9, 0, 0 | |
| POCKET_ENTRY_HELIX_SLOPE | SET_OP_DATA | 9, 0, 0 | |
| POCKET_ENTRY_HELIX_START_Z | SET_OP_DATA | 9, 0, 0 | |
| POCKET_ENTRY_HELIX_START_Z | SET_PROC_DATA | 9, 0, 0 | |
| POCKET_ENTRY_HELIX_TYPE | SET_OP_DATA | 9, 3, 9 | |
| POCKET_ENTRY_HELIX_TYPE | SET_PROC_DATA | 9, 3, 9 | |
| POCKET_ENTRY_HELIX_WALL_CLEAR | SET_OP_DATA | 9, 0, 0 | |
| POCKET_ENTRY_HELIX_WALL_CLEAR | SET_PROC_DATA | 9, 0, 0 | |
| POCKET_ENTRY_PERIPH_SLOPE | SET_OP_DATA | 9, 0, 0 | |
| POCKET_ENTRY_PERIPH_SLOPE | SET_PROC_DATA | 9, 0, 0 | |
| POCKET_ENTRY_PERIPH_START_Z | SET_OP_DATA | 9, 0, 0 | |
| POCKET_ENTRY_PERIPH_START_Z | SET_PROC_DATA | 9, 0, 0 | |
| POCKET_ENTRY_PLUNGE_POINT | SET_OP_DATA | 9, 0, 0 | |
| POCKET_ENTRY_PLUNGE_PT | SET_PROC_DATA | 9, 0, 0 | |
| POCKET_ENTRY_RAMP | SET_OP_DATA | 9, 0, 0 | |
| POCKET_ENTRY_RAMP_ANGLE | SET_OP_DATA | 9, 0, 0 | |
| POCKET_ENTRY_RAMP_ANGLE | SET_PROC_DATA | 9, 0, 0 | |
| POCKET_ENTRY_RAMP_MAX_CUT | SET_OP_DATA | 9, 0, 0 | |
| POCKET_ENTRY_RAMP_SLOPE | SET_OP_DATA | 9, 0, 0 | |
| POCKET_ENTRY_RAMP_SLOPE | SET_PROC_DATA | 9, 0, 0 | |
| POCKET_ENTRY_RAMP_START_Z | SET_OP_DATA | 9, 0, 0 | |
| POCKET_ENTRY_RAMP_START_Z | SET_PROC_DATA | 9, 0, 0 | |
| POCKET_ENTRY_RAMP_TYPE | SET_PROC_DATA | 9, 3, 9 | |
| POCKET_ENTRY_RAMP_WALL_CLEAR | SET_OP_DATA | 9, 0, 0 | |
| POCKET_ENTRY_RAMP_WALL_CLEAR | SET_PROC_DATA | 9, 0, 0 | |
| POCKET_TYPE | SET_OP_DATA | 9, 0, 0 | |
| POCKET_TYPE | SET_PROC_DATA | 9, 3, 9 | |
| POST_FILE | SET_POST_DATA | 9, 0, 0 | |
| PREF_FOOTER_CHARS | SET_POST_DATA | 9, 0, 0 | |
| PREF_FOOTER_FEET | SET_POST_DATA | 9, 0, 0 | |
| PREF_FOOTER_METERS | SET_POST_DATA | 9, 0, 0 | |
| PREF_FOOTER_METRES | SET_POST_DATA | 9, 0, 0 | |
| PREF_HEADER_ABS_INC | SET_POST_DATA | 9, 0, 0 | |
| PREF_HEADER_DATE_TIME | SET_POST_DATA | 9, 0, 0 | |
| PREF_HEADER_FORMAT_CODE | SET_POST_DATA | 9, 0, 0 | |
| PREF_HEADER_FORMAT_NAME | SET_POST_DATA | 9, 0, 0 | |
| PREF_HEADER_NUM_PARTS | SET_POST_DATA | 9, 0, 0 | |
| PREF_HEADER_PROG_COMMENT | SET_POST_DATA | 9, 0, 0 | |
| PREF_HEADER_PROG_NAME | SET_POST_DATA | 9, 0, 0 | |
| PREF_HEADER_SPECIAL | SET_POST_DATA | 9, 0, 0 | |
| PREF_HEADER_START_TOOL | SET_POST_DATA | 9, 0, 0 | |
| PREF_OP_OP_COMMENT | SET_POST_DATA | 9, 0, 0 | |
| PREF_OP_OPNUM_TYPE | SET_POST_DATA | 9, 0, 0 | |
| PREF_OP_TOOL_COMMENT | SET_POST_DATA | 9, 0, 0 | |
| PREF_OP_TOOLNUM_TYPE | SET_POST_DATA | 9, 0, 0 | |
| PREF_OP_WG_COMMENT | SET_POST_DATA | 9, 0, 0 | |
| PREF_SUB | SET_POST_DATA | 9, 0, 0 | |
| PREFER_SUBS | SET_PROC_DATA | 9, 3, 9 | |
| PREFER_SUBS | SET_OP_DATA | 9, 3, 9 | |
| PRIME_SPINDLE | SET_TOOL_DATA | 9, 0, 0 | |
| PROC_GROUP | SET_OP_DATA | 9, 0, 0 | |
| PROC_ID | SET_OP_DATA | 9, 0, 0 | |
| PROC_OP | SET_OP_DATA | 9, 0, 0 | |
| PROG_STOP | SET_OP_DATA | 9, 3, 9 | |
| PROG_STOP | SET_PROC_DATA | 9, 3, 9 | |
| PULLBACK | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| RADIUS | SET_PART_DATA | 9, 0, 0 | |
| RAPID_CLEARANCE | SET_OP_DATA | 9, 0, 0 | |
| RAPID_CLEARANCE | SET_PROC_DATA | 9, 0, 0 | |
| RAPID_IN | SET_OP_DATA | 9, 3, 9 | |
| RAPID_IN | SET_PROC_DATA | 9, 3, 9 | |
| REPEATS | SET_PROC_DATA | 9, 0, 0 | |
| RETRACTS | SET_OP_DATA | 9, 3, 9 | |
| RETRACTS | SET_PROC_DATA | 9, 3, 9 | |
| ROUND_CORNERS | SET_OP_DATA | 9, 3, 9 | |
| ROUND_CORNERS | SET_PROC_DATA | 9, 3, 9 | |
| RPM | SET_OP_DATA | 9, 0, 0 | |
| RPM | SET_PROC_DATA | 9, 0, 0 | |
| RPMS | SET_OP_DATA | 9, 0, 0 | |
| RPMS | SET_PROC_DATA | 9, 0, 0 | |
| S_USE_ADV_TOL | SET_OP_DATA | 9, 3, 9 | |
| S_USE_ADV_TOL | SET_PROC_DATA | 9, 3, 9 | |
| SAME_STROKE | SET_OP_DATA | 9, 3, 9 | |
| SAME_STROKE | SET_PROC_DATA | 9, 3, 9 | |
| SCALLOP_FEED | SET_OP_DATA | 9, 0, 0 | |
| SCALLOP_FEED | SET_PROC_DATA | 9, 0, 0 | |
| SCALLOP_FEED_LOCK | SET_OP_DATA | 9, 3, 9 | |
| SCALLOP_FEED_LOCK | SET_PROC_DATA | 9, 3, 9 | |
| SELECTED_OPS | SET_POST_DATA | 9, 0, 0 | |
| SEQ_BY | SET_POST_DATA | 9, 0, 0 | |
| SEQ_FROM | SET_POST_DATA | 9, 0, 0 | |
| SFLOCUT_TYPE | SET_OP_DATA | 9, 0, 0 | |
| SFLOW_MACH_DIR | SET_OP_DATA | 9, 0, 0 | |
| SFLOW_MACH_ZORDER | SET_OP_DATA | 9, 0, 0 | |
| SFLOW_TRAVEL_AROUND_MODE | SET_OP_DATA | 9, 0, 0 | |
| SHIFT_DISTANCE | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| SPIN_CONTROL | SET_OP_DATA | 9, 0, 0 | |
| SPINDLE_DIR | SET_TOOL_DATA | 9, 0, 0 | |
| SPINDLE_NUM | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| SPINDLE_ON | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| SPINDLE_SPEED | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| SPINDLE_UNLOADED | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| SPINDLE_USED | SET_POST_DATA | 9, 0, 0 | |
| START_ON_RIGHT | SET_OP_DATA | 9, 3, 9 | |
| START_ON_RIGHT | SET_PROC_DATA | 9, 3, 9 | |
| START_PROG_NUM | SET_POST_DATA | 9, 0, 0 | |
| STAY_CLEAR | SET_OP_DATA | 9, 3, 9 | |
| STAY_CLEAR | SET_PROC_DATA | 9, 3, 9 | |
| STEP | SET_OP_DATA | 9, 0, 0 | |
| STEPOVER_FEED | SET_OP_DATA | 9, 0, 0 | |
| STEPOVER_FEED | SET_PROC_DATA | 9, 0, 0 | |
| STEPOVER_FEED_LOCK | SET_OP_DATA | 9, 3, 9 | |
| STEPOVER_FEED_LOCK | SET_PROC_DATA | 9, 3, 9 | |
| STOCK | SET_OP_DATA | 9, 3, 9 | |
| STOCK | SET_PROC_DATA | 9, 3, 9 | |
| STOCK_DIA | SET_POST_DATA | 9, 0, 0 | |
| STOCK_RAD | SET_PART_DATA | 9, 0, 0 | |
| STOCK_RAD | SET_POST_DATA | 9, 0, 0 | |
| STOCK_X1 | SET_PART_DATA | 9, 0, 0 | |
| STOCK_X2 | SET_PART_DATA | 9, 0, 0 | |
| STOCK_Y1 | SET_PART_DATA | 9, 0, 0 | |
| STOCK_Y2 | SET_PART_DATA | 9, 0, 0 | |
| STOCK_Z1 | SET_PART_DATA | 9, 0, 0 | |
| STOCK_Z1 | SET_PART_DATA | 9, 0, 0 | |
| STOCK_Z1 | SET_POST_DATA | 9, 0, 0 | |
| STOCK_Z2 | SET_PART_DATA | 9, 0, 0 | |
| STOCK_Z2 | SET_PART_DATA | 9, 0, 0 | |
| STOCK_Z2 | SET_POST_DATA | 9, 0, 0 | |
| SUB_IN_UNLOAD | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| SURF_STOCK | SET_OP_DATA | 9, 0, 0 | |
| SURF_Z | SET_PROC_DATA | 9, 3, 9 | |
| SURFACE_ARC_FIT_TOL | SET_OP_DATA | 9, 3, 9 | |
| SURFACE_ARC_FIT_TOL | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_BACK_AND_FORTH | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_BACK_FORTH | SET_OP_DATA | 9, 0, 0 | |
| SURFACE_CFEED | SET_PROC_DATA | 9, 3, 9 | |
| SURFACE_CLEANUP_TYPE | SET_PROC_DATA | 9, 4, 12 | |
| SURFACE_CLEAR_STOCK | SET_OP_DATA | 9, 0, 0 | |
| SURFACE_CLEAR_STOCK | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_CLEAR_STOCK_TYPE | SET_OP_DATA | 9, 0, 0 | |
| SURFACE_CLEAR_STOCK_TYPE | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_CONST_FACES_CLEAR | SET_PROC_DATA | 9, 3, 9 | |
| SURFACE_CONSTRAIN | SET_OP_DATA | 9, 0, 0 | |
| SURFACE_CONSTRAIN | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_CONSTRAINT_FACES_CLEAR | SET_OP_DATA | 9, 0, 0 | |
| SURFACE_CONSTRAINT_TOL | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_CONSTRAINT_TOL | SET_OP_DATA | 9, 3, 9 | |
| SURFACE_CORNER_RAD | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_CORNER_RAD | SET_OP_DATA | 9, 3, 9 | |
| SURFACE_CURVE_CUT_DIR | SET_OP_DATA | 9, 0, 0 | |
| SURFACE_CUT_ANGLE | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_CUT_ANGLE | SET_OP_DATA | 9, 3, 9 | |
| SURFACE_CUT_OPT | SET_OP_DATA | 9, 0, 0 | |
| SURFACE_CUT_OPT | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_CUT_OVER_EDGES | SET_OP_DATA | 9, 0, 0 | |
| SURFACE_CUT_OVER_EDGES | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_CUT_TOL | SET_PROC_DATA | 9, 3, 9 | |
| SURFACE_CUT_TYPE | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_CUT_TYPE | SET_OP_DATA | 9, 0, 0 | |
| SURFACE_CUTS_TYPE | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_DEPTH | SET_OP_DATA | 9, 0, 0 | |
| SURFACE_DESIRED_Z | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_DESIRED_Z | SET_OP_DATA | 9, 3, 9 | |
| SURFACE_EFEED | SET_PROC_DATA | 9, 3, 9 | |
| SURFACE_ENTRY_PLUNGE_PT | SET_OP_DATA | 9, 0, 0 | |
| SURFACE_ENTRY_PLUNGE_PT | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_ENTRY_RAMP_TYPE | SET_OP_DATA | 9, 3, 9 | |
| SURFACE_ENTRY_RAMP_TYPE | SET_PROC_DATA | 9, 3, 9 | |
| SURFACE_ENTRY_TYPE | SET_OP_DATA | 9, 3, 9 | |
| SURFACE_ENTRY_TYPE | SET_PROC_DATA | 9, 3, 9 | |
| SURFACE_FIX_TOL | SET_OP_DATA | 9, 0, 0 | |
| SURFACE_FIXTURE_CLEAR | SET_PROC_DATA | 9, 3, 9 | |
| SURFACE_FIXTURE_TOL | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_FIXTURE_TOL | SET_OP_DATA | 9, 3, 9 | |
| SURFACE_FLOW_CUT_TYPE | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_FLOW_MACH_DIR | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_FLOW_MACH_Z_ORDER | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_FLOW_TRAVEL_AROUND_MODE | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_INTERSECT_TYPE | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_LACE_CUT_DIR | SET_OP_DATA | 9, 0, 0 | |
| SURFACE_LACE_CUT_DIR | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_MAX_CUT_ANGLE | SET_PROC_DATA | 9, 3, 9 | |
| SURFACE_MAX_CUT_ANGLE | SET_OP_DATA | 9, 3, 9 | |
| SURFACE_NORMAL_ANGLE | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_NORMAL_ANGLE | SET_OP_DATA | 9, 3, 9 | |
| SURFACE_OFFSET_SURFACES | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_OFFSET_SURFS | SET_OP_DATA | 9, 0, 0 | |
| SURFACE_ONE_PASS | SET_OP_DATA | 9, 0, 0 | |
| SURFACE_ONE_PASS | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_OUTPUT_PREF | SET_OP_DATA | 9, 0, 0 | |
| SURFACE_OUTPUT_PREF | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_PASSES_PER_SIDE | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_PASSES_TYPE | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_RETRACT_OPT | SET_OP_DATA | 9, 0, 0 | |
| SURFACE_RETRACT_OPTION | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_RIDGE_HEIGHT | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_RIDGE_HEIGHT | SET_OP_DATA | 9, 3, 9 | |
| SURFACE_SKIP_FLATS | SET_OP_DATA | 9, 0, 0 | |
| SURFACE_SKIP_FLATS | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_SMOOTH_TOL | SET_OP_DATA | 9, 3, 9 | |
| SURFACE_SMOOTH_TOL | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_SPLINE_APPROX_TOL | SET_PROC_DATA | 9, 3, 9 | |
| SURFACE_SPLINE_TOL | SET_OP_DATA | 9, 0, 0 | |
| SURFACE_STAY_IN_STOCK | SET_OP_DATA | 9, 0, 0 | |
| SURFACE_STAY_IN_STOCK | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_STEP_CUT_RATIO | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_STEP_CUT_RATIO | SET_OP_DATA | 9, 3, 9 | |
| SURFACE_STEP_OVER | SET_OP_DATA | 9, 0, 0 | |
| SURFACE_STEPOVER | SET_PROC_DATA | 9, 3, 9 | |
| SURFACE_STOCK | SET_OP_DATA | 9, 0, 0 | |
| SURFACE_STOCK | SET_PROC_DATA | 9, 3, 9 | |
| SURFACE_STOCK_TOL | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_STOCK_TOL | SET_OP_DATA | 9, 3, 9 | |
| SURFACE_TYPE | SET_OP_DATA | 9, 0, 0 | |
| SURFACE_TYPE | SET_PROC_DATA | 9, 0, 0 | |
| SURFACE_Z | SET_PROC_DATA | 9, 3, 9 | |
| SURRFACE_DEPTH | SET_OP_DATA | 9, 0, 0 | |
| TG_COUNT | SET_PART_DATA | 9, 0, 0 | |
| TIME | SET_OP_DATA | 9, 0, 0 | |
| TIME | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| TIP_Z | SET_PROC_DATA | 9, 3, 9 | |
| TO_WORKPIECE | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| TOOL_CHANGE | SET_PROC_DATA | 9, 0, 0 | |
| TOOL_CHANGE_X | GET_TG_DATA | 9, 0, 0 | |
| TOOL_CHANGE_X | SET_PART_DATA | 9, 0, 0 | |
| TOOL_CHANGE_X | SET_PART_DATA | 9, 0, 0 | |
| TOOL_CHANGE_Y | GET_TG_DATA | 9, 0, 0 | |
| TOOL_CHANGE_Y | SET_PART_DATA | 9, 0, 0 | |
| TOOL_CHANGE_Z | GET_TG_DATA | 9, 0, 0 | |
| TOOL_CHANGE_Z | SET_PART_DATA | 9, 0, 0 | |
| TOOL_GROUP | SET_TOOL_DATA | 9, 0, 0 | |
| TOOL_GROUP | SET_OP_DATA | 9, 0, 0 | |
| TOOL_GROUP_POS | SET_TOOL_DATA | 9, 0, 0 | |
| TOOL_NEG_SIDE | SET_TOOL_DATA | 9, 0, 0 | |
| TOOL_NUM | SET_OP_DATA | 9, 0, 0 | |
| TOOL_NUM | SET_PROC_DATA | 9, 0, 0 | |
| TOOLGROUP | SET_TOOL_DATA | 9, 0, 0 | |
| TORQUE_SENSING | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| TORQUE_VAL | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| TYPE | SET_TOOL_DATA | 9, 0, 0 | |
| TYPE | SET_OP_DATA | 9, 0, 0 | |
| TYPE | SET_PROC_DATA | 9, 0, 0 | |
| TYPE | SET_PART_DATA | 9, 0, 0 | |
| UNITS | SET_PART_DATA | 9, 0, 0 | |
| USE_ID | SET_TOOL_DATA | 9, 0, 0 | |
| UTIL_TYPE | SET_OP_DATA | 9, 0, 0 | |
| WALL_ANG | SET_OP_DATA | 9, 0, 0 | |
| WALL_ANGLE | SET_PROC_DATA | 9, 0, 0 | |
| WALL_BOT | SET_OP_DATA | 9, 0, 0 | |
| WALL_BOTTOM | SET_PROC_DATA | 9, 0, 0 | |
| WALL_DCEP_SIDE | SET_OP_DATA | 9, 0, 0 | |
| WALL_IANG | SET_OP_DATA | 9, 0, 0 | |
| WALL_IBOT | SET_OP_DATA | 9, 0, 0 | |
| WALL_ITOP | SET_OP_DATA | 9, 0, 0 | |
| WALL_MODE | SET_PROC_DATA | 9, 0, 0 | |
| WALL_MODE | SET_OP_DATA | 9, 3, 9 | |
| WALL_RIDGE_HEIGHT | SET_OP_DATA | 9, 0, 0 | |
| WALL_RIDGE_HEIGHT | SET_PROC_DATA | 9, 0, 0 | |
| WALL_SAME_DCEP_SIDE | SET_PROC_DATA | 9, 3, 9 | |
| WALL_SAME_DIR | SET_OP_DATA | 9, 3, 9 | |
| WALL_SAME_DIR | SET_PROC_DATA | 9, 3, 9 | |
| WALL_SHAPE_STEP | SET_PROC_DATA | 9, 0, 0 | |
| WALL_SHAPE_STEP | SET_OP_DATA | 9, 0, 0 | |
| WALL_STEP | SET_OP_DATA | 9, 3, 9 | |
| WALL_STEP | SET_PROC_DATA | 9, 3, 9 | |
| WALL_SWEPT_ISLAND | SET_OP_DATA | 9, 3, 9 | |
| WALL_SWEPT_ISLAND | SET_PROC_DATA | 9, 3, 9 | |
| WALL_SWEPT_POCKET | SET_OP_DATA | 9, 0, 0 | |
| WALL_SWEPT_POCKET | SET_PROC_DATA | 9, 3, 9 | |
| WALL_TOP | SET_PROC_DATA | 9, 0, 0 | |
| WALL_TOP | SET_OP_DATA | 9, 0, 0 | |
| WALL_TOP_TO_BOTTOM | SET_OP_DATA | 9, 3, 9 | |
| WALL_TOP_TO_BOTTOM | SET_PROC_DATA | 9, 3, 9 | |
| WALL_USER_STEP | SET_PROC_DATA | 9, 0, 0 | |
| WALL_USER_STEP | SET_OP_DATA | 9, 0, 0 | |
| WALLI_ANGLE | SET_PROC_DATA | 9, 0, 0 | |
| WALLI_BOTTOM | SET_PROC_DATA | 9, 0, 0 | |
| WALLI_TOP | SET_PROC_DATA | 9, 0, 0 | |
| WG_NUM | SET_OP_DATA | 9, 0, 0 | |
| WORK_FIXTURES | SET_POST_DATA | 9, 0, 0 | |
| WORKPIECE | SET_OP_DATA | 9, 0, 0 | |
| WP_COUNT | SET_PART_DATA | 9, 0, 0 | |
| WRAP | SET_OP_DATA | 9, 3, 9 | |
| WRAP | SET_PROC_DATA | 9, 3, 9 | |
| WRAP_COPY_ANGLE | SET_PROC_DATA | 9, 0, 0 | |
| WRAP_DUP_ANGLE | SET_OP_DATA | 9, 0, 0 | |
| WRAP_DUPS | SET_OP_DATA | 9, 0, 0 | |
| WRAP_NUM_COPIES | SET_PROC_DATA | 9, 3, 9 | |
| WRAP_START_ANGLE | SET_OP_DATA | 9, 0, 0 | |
| WRAP_START_ANGLE | SET_PROC_DATA | 9, 0, 0 | |
| X_CLEARANCE | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| X_DROP | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| X_HOME | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| X_POSITION | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| X_VALUE | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| Z_CLEARANCE | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| Z_DROP | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| Z_HOME | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| Z_POSITION | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| Z_STEP | SET_OP_DATA | 9, 0, 0 | |
| Z_STEP | SET_PROC_DATA | 9, 0, 0 | |
| Z_STEP_WANTED | SET_OP_DATA | 9, 3, 9 | |
| Z_STEP_WANTED | SET_PROC_DATA | 9, 3, 9 | |
| Z_VALUE | SET_UTIL_PROC_DATA | 9, 0, 0 | |
| ZIG_ZAG | SET_OP_DATA | 9, 0, 0 |
