Process proc add: Difference between revisions

From Macros Wiki
Jump to navigationJump to search
Newer edit →
Created page with "{{Up}} {| border="1" ! width="400" | Parameter ! width="100" | Type ! width="400" | Description ! width="100" | Version Number |- | Additive Processes..."
 
No edit summary
Line 105: Line 105:
|-
|-
| ADD_REPEAT_ADJUST_CPS              || Integer || 1=Adjust Clearance Planes          || 14.0.20
| ADD_REPEAT_ADJUST_CPS              || Integer || 1=Adjust Clearance Planes          || 14.0.20
|-
| Technology Data                    ||        ||                                    ||
|-
|-ADD_USE_BASE_LAYER                  || Integer || 1=Use Base Layer                  || 14.0.20
|-
|-ADD_USE_GRAD_LAYER                  || Integer || 1=Use Gradient Material            || 14.0.20
|-
|-ADD_NUM_GRAD_LAYERS_1              || Integer || Number of Layers, Grad Material 1  || 14.0.20
|-
|-ADD_NUM_GRAD_LAYERS_2              || Integer || Number of Layers, Grad Material 2  || 14.0.20
|-
|-ADD_BASE_MATERIAL_NAME              || String  || Base Material Name                || 14.0.20
|-
|-ADD_CLAD_MATERIAL_NAME              || String  || cladding Material Name            || 14.0.20
|-
|-ADD_GRAD_MATERIAL_NAME              || String  || Gradient Material Name            || 14.0.20
|-
|-
| Hybrid Process                      ||        ||                                    ||  
| Hybrid Process                      ||        ||                                    ||  
Line 129: Line 145:
|-
|-
| ADD_HYBRID_SUB_DEPTH_Z              || Decimal || Amount to remove, Additive Section || 14.0.20
| ADD_HYBRID_SUB_DEPTH_Z              || Decimal || Amount to remove, Additive Section || 14.0.20
|-
| Technology Data                    ||        ||                                    ||
|-
|-ADD_USE_BASE_LAYER                  || Integer || 1=Use Base Layer                  || 14.0.20
|-
|-ADD_USE_GRAD_LAYER                  || Integer || 1=Use Gradient Material            || 14.0.20
|-
|-ADD_NUM_GRAD_LAYERS_1              || Integer || Number of Layers, 100% Grad Matl 1 || 14.0.20
|-
|-ADD_NUM_GRAD_LAYERS_2              || Integer || Number of Layers, 100% Grad Matl 2 || 14.0.20
|-
|-ADD_BASE_MATERIAL_NAME              || String  || Base Material Name                || 14.0.20
|-
|-ADD_CLAD_MATERIAL_NAME              || String  || cladding Material Name            || 14.0.20
|-
|-ADD_GRAD_MATERIAL_NAME              || String  || Gradient Material Name            || 14.0.20
|-
|-
}
}

Revision as of 21:26, 23 April 2021

Up


}
Parameter Type Description Version Number
Additive Processes
ADD_PROC_TYPE Integer Additive Process Type 14.0.20
ADD_NUM_LAYERS Integer Number of Cladding Layers 14.0.20
ADD_NUM_PASSES Integer Number of Heater/Dryer Passes 14.0.20
Additive Contour Process
ADD_MIN_WIDTH Decimal Minimum Contour Width 14.0.20
ADD_TILT_TYPE Integer Tilt Type 14.0.20
ADD_NUM_TRACKS Integer Number of Tilt Tracks 14.0.20
ADD_TILT_ANGLE_1 Decimal Tilt Angle, Track 1 14.0.20
ADD_TILT_ANGLE_2 Decimal Tilt Angle, Track 2 14.0.20
ADD_FAN_DIST_PER_STEP Decimal Tilt, Distance Per Step 14.0.20
ADD_FAN_DEG_PER_STEP Decimal Tilt, Degrees per Step 14.0.20
Closed Shapes Options
ADD_CONTOUR_CLOSED_REV_ALT_LAYERS Integer 1 = Reverse Alternate Layers 14.0.20
ADD_CONTOUR_CLOSED_RAMP_OPTION Integer 1 = Spiral Ramp On 14.0.20
ADD_CONTOUR_CLOSED_START_OPTION Integer Adjust Start Position Option 14.0.20
ADD_CONTOUR_CLOSED_RESET_AFTER_NUM Integer 1 = Reset Start Number of Layers 14.0.20
ADD_CONTOUR_CLOSED_RESET_NUM_LAYERS Integer Number of Layers to Reset After 14.0.20
ADD_CONTOUR_CLOSED_ALL_WIDTH_SAME Integer 1 = All Width Tracks, Same Start 14.0.20
ADD_CONTOUR_CLOSED_START_PERCENT Decimal Adjust Start Percentage 14.0.20
ADD_CONTOUR_CLOSED_START_DIST Decimal Adjust Start Distance 14.0.20
ADD_CONTOUR_CLOSED_MIN_CORNER_DIST Decimal Min Distance from a Corner 14.0.20
Additive Fill and Surfaces
ADD_LAYER_MOD_TYPE Integer 1=Shift Layers, 2=Rotate Layers 14.0.20
ADD_LAYER_MOD_STEPS Integer Number of Layers per Group 14.0.20
ADD_LAYER_SHIFT_DISTANCE Decimal Shift Distance, Per layer 14.0.20
ADD_LAYER_ROTATE_ANGLE Decimal Rotation Angle, Per Layer 14.0.20
ADD_FILL_TYPE Integer Fill Pattern 14.0.20
ADD_FILL_CORNER Integer Fill Start Corner 14.0.20
ADD_FILL_SIDE Integer Fill Start Side 14.0.20
ADD_FILL_SPIRAL Integer 1=Fill Spiral 14.0.20
ADD_FILL_DIR_CCW Integer 1 = Fill CCW 14.0.20
ADD_FILL_OUTSIDE_IN Integer 1 = Fill Outside In 14.0.20
ADD_FILL_NUM_SECTIONS Integer Fill, Number of Sections 14.0.20
ADD_FILL_CONNECT Integer Fill Connection Move Type 14.0.20
ADD_SOLIDS_FILL_TYPE Integer Fill Solids Option 14.0.20
Additive Rotary Surface Process
ADD_SURF_TYPE Integer Rotary Surface Type 14.0.20
ADD_SURF_START_Z_TYPE Decimal Start Z position 14.0.20
ADD_SURF_DIR_CW Integer 1 = Direction CW 14.0.20
ADD_SURF_CIRCLE_ANGLE_TYPE Integer 14.0.20
ADD_SURF_ROT_START_Z Decimal 14.0.20
ADD_SURF_ROT_END_Z Decimal 14.0.20
ADD_SURF_ROT_START_ANGLE Decimal 14.0.20
ADD_SURF_ROT_CIRCLE_ANGLE Decimal 14.0.20
ADD_CLEAR_Z Decimal 14.0.20
Repeat Process
ADD_REPEAT_NUM_SECTIONS Integer Number of sections 14.0.20
ADD_REPEAT_ADJUST_CPS Integer 1=Adjust Clearance Planes 14.0.20
Technology Data
Hybrid Process
ADD_HYBRID_CP2 Decimal Entry Clearance Plane Height 14.0.20
ADD_HYBRID_CP3 Decimal Exit Clearance Plane Height 14.0.20
ADD_HYBRID_BOTTOM_Z Decimal Z Start Height 14.0.20
ADD_HYBRID_TOP_Z Decimal Desired Z Top Height 14.0.20
ADD_HYBRID_ADJUST_CPS Decimal 1 = Adjust Clearance Planes 14.0.20
ADD_HYBRID_NUM_LAYERS Integer Number of sections 14.0.20
ADD_HYBRID_NUM_SECTIONS Integer Number of sections 14.0.20
ADD_HYBRID_SUB_BOTTOM_Z Decimal 1 = Subtractive Op at Bottom 14.0.20
ADD_HYBRID_SUB_TOP_Z Decimal 1 = Subtractive Op at Top 14.0.20
ADD_HYBRID_SUB_CLEAR_Z Decimal Extra Clearance, Subtract Section 14.0.20
ADD_HYBRID_SUB_DEPTH_Z Decimal Amount to remove, Additive Section 14.0.20
Retrieved from "https://macros.gibbscam.com/index.php?title=Process_proc_add&oldid=7319"