All Parameters

Variable	Description	Used by	Version Number
ABS_MOVES	Post output is in absolute	SET_POST_DATA	9, 0, 0
ADV_ARC_ENTRY_CRC	Advanced entry/exit has CRC checked in radius entry section	PROC_DATA	9, 5, 13
ADV_ARC_ENTRY_RAD	Advanced entry/exit has radius entry selected	PROC_DATA	9, 5, 13
ADV_ARC_EXIT_CRC	Advanced entry/exit has CRC checked in radius exit section	PROC_DATA	9, 5, 13
ADV_ARC_EXIT_RAD	Advanced entry/exit has radius selected in exit section	PROC_DATA	9, 5, 13
ADV_LINE_ENTRY_CRC	Advanced entry/exit has CRC checked in line entry section	PROC_DATA	9, 5, 13
ADV_LINE_EXIT_CRC	Advanced entry/exit has CRC checked in line exit section	PROC_DATA	9, 5, 13
AFR_BLIND_BOTTOM_ADJUST	AFR amount to adjust bottom of blind holes	SET_HOLEFR_PARAM	9, 5, 14
AFR_CLEAR_PLANE_TOL	AFR clearance plane tolerance	SET_HOLEFR_PARAM	9, 5, 14
AFR_CS_MODE	AFR CS creation option	SET_HOLEFR_PARAM	9, 5, 14
AFR_CS1_ORIGIN	AFR CS1 origin option	SET_HOLEFR_PARAM	9, 5, 14
AFR_MATCH_MODE	AFR match mode	SET_HOLEFR_PARAM	9, 5, 14
AFR_SELECT_MODE	AFR selection mode	SET_HOLEFR_PARAM	9, 5, 14
AFR_THRU_BOTTOM_ADJUST	AFR amount to adjust bottom of through holes	SET_HOLEFR_PARAM	9, 5, 14
AFR_TOP_CLEAR	AFR top clearance amount	SET_HOLEFR_PARAM	9, 5, 14
AFR_WG_NAME	AFR WorkGroup name;	SET_HOLEFR_PARAM	9, 5, 14
ALLOY	Material alloy option	PART_DATA	9, 0, 0
AUTO_CLEAR_ON	Auto clearance is on	PART_DATA	9, 0, 0
AUTO_CLEAR_VAL	Auto clearance value	PART_DATA	9, 0, 0
AUTO_ENTRY_CLEAR_RAD	Entry move clear radius	OP_DATA - PROC_DATA	9, 0, 0
AUTO_ENTRY_CP	Entry clear plane height	OP_DATA - PROC_DATA	9, 0, 0
AUTO_EXIT_CLEAR_RAD	Exit move clear radius	OP_DATA - PROC_DATA	9, 0, 0
AUTO_EXIT_CP	Exit clear plane height	OP_DATA - PROC_DATA	9, 0, 0
AUTO_REMOVE	Auto remove option	UTIL_PROC_DATA	9, 0, 0
AXIS_INFO	Axis info	PROC_DATA	9, 0, 0
BACK_FORTH	Back and Forth is checked	OP_DATA	9, 0, 0
BOSS_STOCK	Boss stock amount	OP_DATA - PROC_DATA	9, 0, 0
C_SYNCHED	C Synched is checked	UTIL_PROC_DATA	9, 0, 0
CHUCK_PART_LEN	Chuck part length	SET_POST_DATA	9, 0, 0
CHUCK_WIDTH	Chuck width	SET_POST_DATA	9, 0, 0
CLEAR_DIA	Clearance diameter	SET_POST_DATA	9, 0, 0
CLEAR_FEED	Clearance feedrate	OP_DATA - PROC_DATA	9, 0, 0
CLEAR_FEED_LOCK	Clearance feed lock is checked	OP_DATA - PROC_DATA	9, 0, 0
CLEAR_PERIPH	Clear periphery is selected	OP_DATA - PROC_DATA	9, 0, 0
CLEAR_RAD	Clearance radius	PART_DATA - SET_POST_DATA	9, 0, 0
CLEAR_Z	Clearance Z value;	SET_POST_DATA	9, 0, 0
COMMENT	Comment text	PART_DATA - TOOL_DATA	9, 0, 0
COMMENT	Comment text	PROC_DATA - OP_DATA	9, 0, 0
COMMENTS	Comments is checked	SET_POST_DATA	9, 0, 0
CONTOUR_ENTRY_HELIX_DIA	Contour entry helix diameter	OP_DATA - PROC_DATA	9, 0, 0
CONTOUR_ENTRY_HELIX_MAX_CUT	Contour entry helix maximum cut	OP_DATA - PROC_DATA	9, 0, 0
CONTOUR_ENTRY_HELIX_SLOPE	Contour entry helix slope	OP_DATA - PROC_DATA	9, 0, 0
CONTOUR_ENTRY_HELIX_START_Z	Contour entry helix start Z	OP_DATA - PROC_DATA	9, 0, 0
CONTOUR_ENTRY_HELIX_TYPE	Contour entry helix type	OP_DATA - PROC_DATA	9, 0, 0
CONTOUR_ENTRY_RAMP_ANGLE	Contour entry ramp angle	OP_DATA - PROC_DATA	9, 0, 0
CONTOUR_ENTRY_RAMP_MAX_CUT	Contour entry ramp maximum cut	OP_DATA - PROC_DATA	9, 0, 0
CONTOUR_ENTRY_RAMP_SLOPE	Contour entry ramp slope	OP_DATA - PROC_DATA	9, 0, 0
CONTOUR_ENTRY_RAMP_START_Z	Contour entry ramp start Z	OP_DATA - PROC_DATA	9, 0, 0
CONTOUR_ENTRY_RAMP_TYPE	Contour entry ramp type	OP_DATA - PROC_DATA	9, 0, 0
CONTOUR_FEED	Contour feedrate	OP_DATA - PROC_DATA	9, 0, 0
CONTROL_POINT	Control point	UTIL_PROC_DATA	9, 0, 0
COOLANT	Coolant type	OP_DATA - PROC_DATA	9, 0, 0
CP1	CP1 value	PART_DATA - OP_DATA - PROC_DATA	9, 0, 0
CRC	CRC state	PROC_DATA	9, 0, 0
CRC_DIR	CRC direction	OP_DATA	9, 0, 0
CRC_OFFSET	CRC offset number	OP_DATA - PROC_DATA	9, 0, 0
CRC_SIDE	CRC side	OP_DATA	9, 0, 0
CS	CS number	UTIL_PROC_DATA	9, 0, 0
CS_NUM	CS number	OP_DATA - PROC_DATA	9, 0, 0
CSS	Constant surface speed value	OP_DATA - PROC_DATA	9, 0, 0
CURVE_CUT_DIR	Curve cut direction	PROC_DATA	9, 0, 0
CURVE_TOL	Curve tolerance	PROC_DATA	9, 0, 0
CURVE_TOLERANCE	Curver tolerance	OP_DATA	9, 0, 0
CUSTOM_CBSET	Custom CBSET	PROC_DATA	9, 3, 9
CUT_ANGLE	Cut angle	OP_DATA - PROC_DATA	9, 0, 0
CUT_BACK	Cut back amount	OP_DATA - PROC_DATA	9, 0, 0
CUT_SIDE	Cut side	OP_DATA - PROC_DATA	9, 0, 0
CUT_TOL	Cut tolerance	OP_DATA	9, 0, 0
CUT_TYPE	Cut type	OP_DATA - PROC_DATA	9, 0, 0
CUT_WIDTH	Cut width	OP_DATA - PROC_DATA	9, 0, 0
DEPTH	Depth	OP_DATA	9, 0, 0
DEPTH_FIRST	Cut depth first	OP_DATA - PROC_DATA	9, 0, 0
DRAFT_ANGLE	Draft angle	TOOL_DATA	9, 0, 0
DRILL_BORE_PULLOFF	Bore pulloff amount	OP_DATA - PROC_DATA	9, 0, 0
DRILL_CB_END_RIZ	Drill cycle end RIZ	OP_DATA	9, 0, 0
DRILL_CB_START_RIZ	Drill cycle start RIZ	OP_DATA	9, 0, 0
DRILL_CLEAR_PLANE	Drill clearance plane height	OP_DATA - PROC_DATA	9, 0, 0
DRILL_CLEAR_PLANE_LOC_CS	Use local CS	OP_DATA	9, 0, 0
DRILL_DWELL	Drill cycle dwell amount	OP_DATA - PROC_DATA	9, 0, 0
DRILL_FEED	Drill feedrate	PROC_DATA	9, 0, 0
DRILL_PECK_AMOUNT	Drill peck depth	OP_DATA - PROC_DATA	9, 0, 0
DRILL_PECK_CLEARANCE	Drill peck clearance	OP_DATA - PROC_DATA	9, 0, 0
DRILL_PECK_RETRACT	Drill peck retract amount	OP_DATA - PROC_DATA	9, 0, 0
DRILL_POS_APPROACH	Use positive approach	OP_DATA - PROC_DATA	9, 0, 0
DRILL_TAP_PERCENT	Tap percentage	OP_DATA - PROC_DATA	9, 0, 0
DRILL_TYPE	Drill cycle type	OP_DATA - PROC_DATA	9, 0, 0
ENTRY_CLEAR	Entry clearance value	OP_DATA - PROC_DATA	9, 0, 0
ENTRY_FEED	Entry feedrate	OP_DATA - PROC_DATA	9, 0, 0
ENTRY_LINE	Use entry line	OP_DATA - PROC_DATA	9, 0, 0
ENTRY_LINE_LEN	Entry line length	OP_DATA - PROC_DATA	9, 0, 0
ENTRY_PERP	Entry is perpendicular	OP_DATA - PROC_DATA	9, 0, 0
ENTRY_RAD	Entry arc radius	OP_DATA - PROC_DATA	9, 0, 0
ENTRY_TYPE	Entry move type	OP_DATA - PROC_DATA	9, 0, 0
EXIT_CLEAR	Exit clearance value	OP_DATA - PROC_DATA	9, 0, 0
EXIT_LINE	Use exit line	OP_DATA - PROC_DATA	9, 0, 0
EXIT_LINE_LEN	Exit line length	OP_DATA - PROC_DATA	9, 0, 0
EXIT_PERP	Exit is perpendicular	OP_DATA - PROC_DATA	9, 0, 0
EXIT_RAD	Exit arc radius	OP_DATA - PROC_DATA	9, 0, 0
FAMILY	Material family	PART_DATA	9, 0, 0
FEED_CONNECT	Use feed connect	OP_DATA - PROC_DATA	9, 0, 0
FEED_DISTANCE	Feed distance	UTIL_PROC_DATA	9, 0, 0
FEEDRATE	Feedrate	UTIL_PROC_DATA	9, 0, 0
FLOW	Flow number	OP_DATA	9, 0, 0
FLOW_NUM	Flow number	UTIL_PROC_DATA	9, 0, 0
FM_BACK_AND_FORTH	Back and Forth setting	PROC_DATA	9, 3, 9
FM_BEFORE_ZIGZAG	Before zigzag option	PROC_DATA	9, 3, 9
FM_CLEAR	Clearance option	OP_DATA - PROC_DATA	9, 0, 0
FM_CUT_WIDTH	Cut width	OP_DATA - PROC_DATA	9, 0, 0
FM_HPLUS	Cut in Horizontal plus direction	OP_DATA - PROC_DATA	9, 0, 0
FM_MOVEH	Move horizontal	OP_DATA - PROC_DATA	9, 0, 0
FM_TYPE	Type	OP_DATA - PROC_DATA	9, 0, 0
FM_USE_SHAPE	Use shape	OP_DATA - PROC_DATA	9, 0, 0
FM_VPLUS	Cut in vertical plus direction	OP_DATA - PROC_DATA	9, 0, 0
FORM_SHAPE_REF	Shape reference number used for form tool	TOOL_DATA	9, 5, 13
FORWARD	Forward option	UTIL_PROC_DATA	9, 0, 0
FROM_WORKPIECE	Dimensions from workpiece	UTIL_PROC_DATA	9, 0, 0
FULL_DIA	Full diameter value	OP_DATA - PROC_DATA	9, 0, 0
FULL_RETURN	Full return option	UTIL_PROC_DATA	9, 0, 0
GEO_RAD	Geometry radius	OP_DATA - PROC_DATA	9, 0, 0
GRAPHIC_PART_DIST_ON	Graphic part distance on is checked	PART_DATA	9, 0, 0
GRAPHIC_PART_DIST_VAL	Graphic part distance value	PART_DATA	9, 0, 0
GRIP_Z	Grip Z value	UTIL_PROC_DATA	9, 0, 0
GROUP_ANG_TOL	Angular tolerance	SET_HOLEFR_PARAM	9, 5, 14
GROUP_KEEP	Keep in group	SET_HOLEFR_PARAM	9, 5, 14
GROUP_LIN_TOL	Linear tolerance value	SET_HOLEFR_PARAM	9, 5, 14
GROUP_MODE	Group mode	SET_HOLEFR_PARAM	9, 5, 14
GROUP_SAME_BOTTOM_Z	Group same bottom Z together	SET_HOLEFR_PARAM	9, 5, 14
GROUP_SAME_CS	Group same CS together	SET_HOLEFR_PARAM	9, 5, 14
GROUP_SAME_DIA	Group same diameter together	SET_HOLEFR_PARAM	9, 5, 14
GROUP_SAME_MID_Z	Group same mid Z together	SET_HOLEFR_PARAM	9, 5, 14
GROUP_SAME_TOP_Z	Group same top Z together	SET_HOLEFR_PARAM	9, 5, 14
GROUP_SAME_TYPE	Group same hole type together	SET_HOLEFR_PARAM	9, 5, 14
HARDNESS	Hardness value	PART_DATA	9, 0, 0
HIT_FLATS	Hit flats option	OP_DATA - PROC_DATA	9, 0, 0
HIT_PARALLEL	Hit parallel option	OP_DATA - PROC_DATA	9, 0, 0
HOLDER_SHAPE_REF	Reference number of shape used for tool holder	TOOL_DATA	9, 0, 0
HOLDER_SOLID_REF	Reference number of solid used for tool holder	TOOL_DATA	9, 0, 0
ID	Tool ID option	TOOL_DATA	9, 0, 0
IGNORE_TOOLS	Ignore tools option	OP_DATA - PROC_DATA	9, 0, 0
INITIAL_FACE_Z	Initial face Z value	UTIL_PROC_DATA	9, 0, 0
INTER_OP_OVERRIDE	Interop override option	OP_DATA	9, 0, 0
INTER_PART_FULL_UP	Inter part full up option	SET_POST_DATA	9, 0, 0
INTERSECT_CLEANUP_FROM	Cleanup from option	OP_DATA	9, 0, 0
INTERSECT_CUTS_TYPE	Cut type	OP_DATA	9, 0, 0
INTERSECT_PASS_TYPE	Pass type	OP_DATA	9, 0, 0
INTERSECT_PASSES_PER_SIDE	Number of passes per side	OP_DATA	9, 0, 0
INTERSECT_TYPE	Type	OP_DATA	9, 0, 0
LATHE_CANNED_AUTOFIN	Auto finish option	OP_DATA	9, 0, 0
LATHE_CLEAR_ID	Clear ID value	PROC_DATA	9, 0, 0
LATHE_CUT_DIR	Cut direction	OP_DATA	9, 0, 0
LATHE_CUT_OFF	Cut off value	OP_DATA	9, 0, 0
LATHE_CUT_OTHER_SIDE	Cut other side option	OP_DATA - PROC_DATA	9, 0, 0
LATHE_CUT_WIDTH	Cut width	OP_DATA	9, 0, 0
LATHE_DEPTH	Depth of cut	OP_DATA	9, 0, 0
LATHE_MAX_RPM	Maximum RPM	OP_DATA	9, 0, 0
LATHE_NO_DRAG	No drag option	OP_DATA	9, 0, 0
LATHE_OD_ID_FACE	OD ID Face setting	OP_DATA	9, 0, 0
LATHE_PAT_SHIFT_FIXED_SRT	Pattern shift fixed option	OP_DATA	9, 0, 0
LATHE_PAT_SHIFT_PASSES	Pattern shift number of passes	OP_DATA	9, 0, 0
LATHE_PATTERN_SHIFT_CUT	Pattern shift cut	OP_DATA	9, 0, 0
LATHE_PATTERN_SHIFT_POINT	Pattern shift point	OP_DATA	9, 0, 0
LATHE_PLUNGE_CENTER_OUT	Plunge from center outwards	OP_DATA	9, 0, 0
LATHE_PLUNGE_CUT_TYPE	Plunge cut type	OP_DATA	9, 0, 0
LATHE_PLUNGE_ENTRY_TYPE	Plunge entry type	OP_DATA	9, 0, 0
LATHE_PLUNGE_TYPE	Plunge type	OP_DATA	9, 0, 0
LATHE_PREFER_CANNED	Prefer canned option	OP_DATA - PROC_DATA	9, 0, 0
LATHE_PULL_OFF_WALL	Pulloff wall value	OP_DATA	9, 0, 0
LATHE_ROUGH_TYPE	Rough cycle type	OP_DATA	9, 0, 0
LATHE_SQUARE_CORNERS	Square corners option	OP_DATA	9, 0, 0
LATHE_SURFACE_Z	Surface z value	OP_DATA	9, 0, 0
LATHE_TYPE	Lathe Process type	PROC_DATA	9, 0, 0
LATHE_TYPE	Lathe Operation type	OP_DATA	9, 0, 0
LATHE_USE_AUTO_CLEAR	Use auto clearance	PROC_DATA	9, 4, 12
LATHE_XZ_STOCK	Use XZ stock	OP_DATA	9, 0, 0
LDRILL_CLEARANCE	Lathe drill clearance value	PROC_DATA	9, 0, 0
LDRILL_DWELL	Lathe drill dwell amount	PROC_DATA	9, 0, 0
LDRILL_ENTRY	Lathe drill entry type	PROC_DATA	9, 3, 9
LDRILL_FEED	Lathe drill feed value	PROC_DATA	9, 0, 0
LDRILL_PECK	Lathe drill peck value	PROC_DATA	9, 0, 0
LDRILL_RETRACT	Lathe drill retract amount	PROC_DATA	9, 0, 0
LDRILL_SURFACE_Z	Lathe drill surface Z value	PROC_DATA	9, 0, 0
LDRILL_TAP_PERCENT	Lathe drill tap percentage	PROC_DATA	9, 0, 0
LDRILL_TIP_Z	Lathe drill Tip Z position	PROC_DATA	9, 0, 0
LEN_OFFSET	Length offset number	OP_DATA - PROC_DATA	9, 0, 0
LENGTH	Length	OP_DATA	9, 0, 0
LLTOOL_THICK	Lathe tool thickness	TOOL_DATA	9, 0, 0
LOCATION	Location value	UTIL_PROC_DATA	9, 0, 0
LOCKS	Locks setting	OP_DATA	9, 0, 0
LPLUNGE_ANGLE	Lathe plunge angle	OP_DATA	9, 0, 0
LPLUNGE_FEED_PERCENT	Lathe plunge feed percentage	OP_DATA	9, 0, 0
LPLUNGE_MAX_CUT	Lathe plunge maximum cut	OP_DATA	9, 0, 0
LPLUNGE_PECK_AMOUNT	Lathe plunge peck amount	OP_DATA	9, 0, 0
LPLUNGE_PECK_CLEARANCE	Lathe plunge peck clearance	OP_DATA	9, 0, 0
LPLUNGE_PECK_RETRACT	Lathe plunge peck retract amount	OP_DATA	9, 0, 0
LROUGH_AUTO_FINISH	Lathe rough auto finish option	PROC_DATA	9, 0, 0
LROUGH_AUTO_FINISH_FEED	Lathe rough auto finish feedrate	PROC_DATA	9, 3, 9
LROUGH_AUTOFIN	Lathe rough auto finish option	OP_DATA	9, 0, 0
LROUGH_AVOID_AIR	Lathe rough avoid air option	PROC_DATA	9, 0, 0
LROUGH_BACK_AND_FORTH	Lathe rough back and forth setting	PROC_DATA	9, 5, 13
LROUGH_CENTER_OUT	Lathe rough from center out	PROC_DATA	9, 0, 0
LROUGH_CLEANUP_PASS	Lathe rough use cleanup pass	PROC_DATA	9, 0, 0
LROUGH_CLEARANCE	Lathe rough clearance value	PROC_DATA	9, 3, 9
LROUGH_CONSTANT_PATH	Lathe rough constant path option	OP_DATA - PROC_DATA	9, 0, 0
LROUGH_CONSTANT_STEP	Lathe rough constant step option	PROC_DATA	9, 0, 0
LROUGH_CONTOUR_FEED	Lathe rough conmtour feedrate	PROC_DATA	9, 3, 9
LROUGH_CSS	Lathe rough constant surface speed value	PROC_DATA	9, 0, 0
LROUGH_CUT_DIR	Lathe rough cut direction	PROC_DATA	9, 0, 0
LROUGH_CUT_OFF	Lathe rough cut off value	PROC_DATA	9, 0, 0
LROUGH_CUT_WIDTH	Lathe rough cut width	PROC_DATA - OP_DATA	9, 0, 0
LROUGH_CUT_X	Lathe rough cut in X direction	PROC_DATA	9, 0, 0
LROUGH_CUT_Z	Lathe rough cut in Z direction	PROC_DATA	9, 0, 0
LROUGH_CYCLE_SP_X	Lathe rough cycle start point X value	PROC_DATA	9, 5, 13
LROUGH_CYCLE_SP_Z	Lathe rough cycle start point Z value	PROC_DATA	9, 5, 13
LROUGH_DEFLECT_COMP_VAL	Lathe rough deflection compensation value	PROC_DATA	9, 4, 12
LROUGH_DIR_FWD	Lathe rough direction forward	PROC_DATA	9, 5, 13
LROUGH_ENTRY_FEED	Lathe rough entry feedrate	PROC_DATA	9, 3, 9
LROUGH_ENTRY_LINE	Lathe rough entry line option	OP_DATA - PROC_DATA	9, 0, 0
LROUGH_ENTRY_PERP	Lathe rough entry perpendicular option	PROC_DATA	9, 0, 0
LROUGH_ENTRY_RAD	Lathe rough entry arc radius	OP_DATA - PROC_DATA	9, 0, 0
LROUGH_EXIT_LINE	Lathe rough exit line option	OP_DATA - PROC_DATA	9, 0, 0
LROUGH_EXIT_PERP	Lathe rough exit perpendicular option	OP_DATA - PROC_DATA	9, 0, 0
LROUGH_EXIT_RAD	Lathe rough exit arc radius	OP_DATA - PROC_DATA	9, 0, 0
LROUGH_FEED	Lathe rough feedrate	PROC_DATA	9, 3, 9
LROUGH_FEED_PERCENT	Lathe rough feed percentage	PROC_DATA	9, 0, 0
LROUGH_FINISH_LAST	Lathe rough finish last	PROC_DATA	9, 0, 0
LROUGH_FIXED_SP	Lathe rough uses fixed start point	PROC_DATA	9, 0, 0
LROUGH_MAX_RPM	Lathe rough maximum spindle speed	PROC_DATA	9, 3, 9
LROUGH_MIN_RAD	Lathe rough minimum radius	OP_DATA - PROC_DATA	9, 0, 0
LROUGH_MONOTONIC	Lathe rough is monotonic	PROC_DATA	9, 0, 0
LROUGH_MULTI_PASS	Lathe rough uses multiple passes	PROC_DATA	9, 4, 12
LROUGH_NUM_PASSES	Lathe rough number of passes	PROC_DATA	9, 0, 0
LROUGH_OFFSET_CUT_DEPTH	Lathe rough offset cycle cut depth	PROC_DATA	9, 5, 13
LROUGH_PECK	Lathe rough uses pecking	PROC_DATA	9, 0, 0
LROUGH_PECK_VAL	Lathe rough peck value	PROC_DATA	9, 0, 0
LROUGH_PLUNGE_ANGLE	Lathe rough plunge angle	PROC_DATA	9, 0, 0
LROUGH_PLUNGE_FIRST	Lathe rough plunge first	PROC_DATA	9, 5, 13
LROUGH_PLUNGE_TYPE	Lathe rough plunge type	OP_DATA - PROC_DATA	9, 0, 0
LROUGH_RAMP_ANGLE	Lathe rough ramp angle	OP_DATA - PROC_DATA	9, 0, 0
LROUGH_RAPID_STEP	Lathe rough rapid step value	PROC_DATA	9, 0, 0
LROUGH_RETRACT	Lathe rough retract option	PROC_DATA	9, 0, 0
LROUGH_ROUGH_START	Lathe rough start option	PROC_DATA	9, 3, 9
LROUGH_ROUGH_TYPE	Lathe rough cycle type	PROC_DATA	9, 0, 0
LROUGH_ROUND_CORNERS	Lathe rough round corners option	OP_DATA - PROC_DATA	9, 0, 0
LROUGH_SFPM	Lathe rough surface speed	PROC_DATA	9, 3, 9
LROUGH_SHIFT_CUT_WIDTH	Lathe rough shift cut width	PROC_DATA	9, 0, 0
LROUGH_SHIFT_SQUARE_CORNERS	Lathe rough shift square corners	PROC_DATA	9, 5, 13
LROUGH_SPINDLE_DIR	Lathe rough spindle direction	OP_DATA - PROC_DATA	9, 0, 0
LROUGH_START	Lathe rough start option	OP_DATA	9, 0, 0
LROUGH_START_SIDE_EXT	Lathe rough start side extension amount	PROC_DATA	9, 5, 13
LROUGH_STOCK	Lathe rough stock value	PROC_DATA	9, 3, 9
LROUGH_STOCK_X	Lathe rough X stock value	PROC_DATA	9, 3, 9
LROUGH_STOCK_Z	Lathe rough Z stock value	PROC_DATA	9, 3, 9
LROUGH_TURN_CUT_WIDTH	Lathe rough turn cut width	PROC_DATA	9, 0, 0
LROUGH_USE_DEFLECT_COMP	Lathe rough uses deflection compensation	PROC_DATA	9, 4, 12
LROUGH_XMINUS	Lathe rough cuts in X minus direction	OP_DATA - PROC_DATA	9, 0, 0
LROUGH_XPLUS	Lathe rough cuts in X plus direction	OP_DATA - PROC_DATA	9, 0, 0
LROUGH_ZMINUS	Lathe rough cuts in Z minus direction	OP_DATA - PROC_DATA	9, 0, 0
LROUGH_ZPLUS	Lathe rough cuts in Z plus direction	OP_DATA - PROC_DATA	9, 0, 0
LTHREAD_ALTERNATE	Lathe thread alternate cut option	OP_DATA - PROC_DATA	9, 0, 0
LTHREAD_ANGLE	Lathe thread angle	OP_DATA	9, 0, 0
LTHREAD_ANGLE_ALT	Lathe thread alternate angle	OP_DATA	9, 0, 0
LTHREAD_BALANCED	Lathe thread balance option	OP_DATA	9, 0, 0
LTHREAD_BALANCED_IN_FEED	Lathe thread balanced in feed amount	PROC_DATA	9, 3, 9
LTHREAD_CSS	Lathe thread surface speed value	PROC_DATA	9, 3, 9
LTHREAD_CUT_DEPTH	Lathe thread cut depth	PROC_DATA	9, 0, 0
LTHREAD_CUT_DIR	Lathe thread cut direction	PROC_DATA	9, 3, 9
LTHREAD_CUT_TYPE	Lathe thread cut type	PROC_DATA	9, 3, 9
LTHREAD_FIRST_CUT	Lathe thread first cut option	OP_DATA	9, 0, 0
LTHREAD_HEIGHT_XR	Lathe thread height as a radial value	OP_DATA	9, 0, 0
LTHREAD_LAST_CUT	Lathe thread last cut option	OP_DATA - PROC_DATA	9, 0, 0
LTHREAD_MAJOR_DIA	Lathe thread major diameter	OP_DATA - PROC_DATA	9, 0, 0
LTHREAD_MAX_RPM	Lathe thread maximum spindle speed	PROC_DATA	9, 0, 0
LTHREAD_MINOR_DIA	Lathe thread minor diameter	PROC_DATA	9, 0, 0
LTHREAD_MINOR_XD	Lathe thread minor diameter	OP_DATA	9, 0, 0
LTHREAD_NOM_PITCH_INDEX	Lathe thread nominal pitch index	OP_DATA	9, 0, 0
LTHREAD_NOMINAL	Lathe thread nominal value	OP_DATA	9, 0, 0
LTHREAD_NOMINAL_PITCH_INDEX	Lathe thread nominal pitch index	PROC_DATA	9, 3, 9
LTHREAD_NOMINAL_XD	Lathe thread nominal diameter	PROC_DATA	9, 0, 0
LTHREAD_NUM_SPRING_PASSES	Lathe thread number of spring passes	PROC_DATA	9, 3, 9
LTHREAD_NUM_STARTS	Lathe thread number of starts	PROC_DATA	9, 3, 9
LTHREAD_PITCH	Lathe thread pitch	OP_DATA - PROC_DATA	9, 0, 0
LTHREAD_RUN_IN	Lathe thread run in amount	OP_DATA	9, 0, 0
LTHREAD_RUN_OUT	Lathe thread run out amount	OP_DATA	9, 0, 0
LTHREAD_SFPM	Lathe thread surface speed value	PROC_DATA	9, 0, 0
LTHREAD_SLOPE	Lathe thread slope value	OP_DATA	9, 0, 0
LTHREAD_STARTS	Lathe thread number of starts	OP_DATA	9, 0, 0
LTHREAD_STYPE	Lathe thread type	OP_DATA - PROC_DATA	9, 0, 0
LTHREAD_TAPER	Lathe thread taper value	PROC_DATA	9, 0, 0
LTHREAD_TAPER_INDEX	Lathe thread taper index	PROC_DATA	9, 3, 9
LTHREAD_THREAD_ANGLE	Lathe thread thread angle	PROC_DATA	9, 0, 0
LTHREAD_THREAD_HEIGHT	Lathe thread thread height	PROC_DATA	9, 0, 0
LTHREAD_TPI	Lathe thread number of TPI	OP_DATA	9, 0, 0
LTHREAD_TYPE	Lathe thread type	OP_DATA	9, 0, 0
LTHREAD_X_END_EXTEND	Lathe thread X end extension	PROC_DATA	9, 0, 0
LTHREAD_X_START_EXTEND	Lathe thread X start extension	PROC_DATA	9, 0, 0
LTHREAD_Z_END	Lathe thread Z end position	OP_DATA - PROC_DATA	9, 0, 0
LTHREAD_Z_END_EXTEND	Lathe thread Z end extension	PROC_DATA	9, 0, 0
LTHREAD_Z_START	Lathe thread Z start position	OP_DATA - PROC_DATA	9, 0, 0
LTHREAD_Z_START_EXTEND	Lathe thread Z start extension	PROC_DATA	9, 0, 0
LTOOL_B_AXIS	Lathe tool B axis angle	TOOL_DATA	9, 0, 0
LTOOL_CUT_SIDE	Lathe tool cut side	TOOL_DATA	9, 0, 0
LTOOL_DIA_RELIEF	Lathe tool diameter relief	TOOL_DATA	9, 0, 0
LTOOL_FACE_ANGLE	Lathe tool face angle	TOOL_DATA	9, 0, 0
LTOOL_FACE_RELIEF	face relief	TOOL_DATA	9, 0, 0
LTOOL_FACE_UP	Lathe tool face up option	TOOL_DATA	9, 0, 0
LTOOL_HOLDER	Lathe tool holder type	TOOL_DATA	9, 0, 0
LTOOL_HOLDER_THICKNESS	Lathe tool holder thickness	TOOL_DATA	9, 0, 0
LTOOL_INSERT_ANGLE	Lathe tool insert angle	TOOL_DATA	9, 0, 0
LTOOL_ISIZE	Lathe tool insert size	TOOL_DATA	9, 0, 0
LTOOL_LENGTH	Lathe tool length	TOOL_DATA	9, 0, 0
LTOOL_MID_ANGLE	Lathe tool mid angle	TOOL_DATA	9, 0, 0
LTOOL_OFFSET	Lathe tool offset number	TOOL_DATA	9, 0, 0
LTOOL_ORIENTATION	Lathe tool orientation	TOOL_DATA	9, 0, 0
LTOOL_OTHER	Lathe tool other data	TOOL_DATA	9, 0, 0
LTOOL_PRESET_PT_X	Lathe tool preset point in X	TOOL_DATA	9, 0, 0
LTOOL_PRESET_PT_Z	Lathe tool preset point in Z	TOOL_DATA	9, 0, 0
LTOOL_SIDE_ANGLE	Lathe tool side angle	TOOL_DATA	9, 0, 0
LTOOL_SIZE	Lathe tool size	TOOL_DATA	9, 0, 0
LTOOL_THREAD_DIR	Lathe thread tool direction	TOOL_DATA	9, 0, 0
LTOOL_THREAD_EDGE_POS_X	Lathe thread tool edge position in X	TOOL_DATA	9, 0, 0
LTOOL_THREAD_EDGE_POS_Z	Lathe thread tool edge position in Z	TOOL_DATA	9, 0, 0
LTOOL_THREAD_FLAT_LEN	Lathe thread tool flat length	TOOL_DATA	9, 0, 0
LTOOL_THREAD_ID_OD	Lathe thread tool ID or OD setting	TOOL_DATA	9, 0, 0
LTOOL_THREAD_INSERT_WIDTH	Lathe thread tool insert width	TOOL_DATA	9, 0, 0
LTOOL_THREAD_PITCH	Lathe thread tool pitch	TOOL_DATA	9, 0, 0
LTOOL_THREAD_STYLE	Lathe thread tool style	TOOL_DATA	9, 0, 0
LTOOL_THREAD_TYPE	Lathe thread tool type	TOOL_DATA	9, 0, 0
LTOOL_TIP_ANGLE	Lathe tool tip angle	TOOL_DATA	9, 0, 0
LTOOL_TIP_CENTER_TO_PRESET_X	Lathe tool tip center to preset pt dist in X	TOOL_DATA	9, 0, 0
LTOOL_TIP_CENTER_TO_PRESET_Z	Lathe tool tip center to preset pt dist in Z	TOOL_DATA	9, 0, 0
LTOOL_TIP_OFFSET	Lathe tool tip offset	TOOL_DATA	9, 0, 0
LTOOL_TIP_RAD	Lathe tool tip radius	TOOL_DATA	9, 0, 0
LTOOL_TIP_WIDTH	Lathe tool tip width	TOOL_DATA	9, 0, 0
LTOOL_TURRET_SHIFT_X	Lathe tool turret shift in X	TOOL_DATA	9, 0, 0
LTOOL_TURRET_SHIFT_Z	Lathe tool turret shift in Z	TOOL_DATA	9, 0, 0
LTOOL_TYPE	Lathe tool type	TOOL_DATA	9, 0, 0
LTOOL_UTIL_ANGLE	Lathe utility tool angle	TOOL_DATA	9, 0, 0
LTOOL_UTIL_DIA	Lathe utility tool diameter	TOOL_DATA	9, 0, 0
LTOOL_UTIL_LEN	Lathe utility tool length	TOOL_DATA	9, 0, 0
LTOOL_WIDTH	Lathe tool width	TOOL_DATA	9, 0, 0
M_USE_ADV_TOL	Use advanced tolerance	OP_DATA - PROC_DATA	9, 0, 0
M_ZSHIFT	Z shift value	OP_DATA	9, 0, 0
MACH_ENGINE	Machining engine	OP_DATA	9, 0, 0
MACH_FLOWS	Number of flows	PART_DATA	9, 0, 0
MACHINE_MODE	Machine mode	UTIL_PROC_DATA	9, 0, 0
MATERIAL	Material type	TOOL_DATA	9, 0, 0
MATERIAL_ONLY	Use material only option	OP_DATA - PROC_DATA	9, 0, 0
MATERIAL_ONLY_CLEARANCE	Material only clearance	OP_DATA	9, 0, 0
MD_FROM_TOOL	Multi-depth from tool	OP_DATA - PROC_DATA	9, 0, 0
MD_PROCESS_LOAD_H1Z_FEAT	Multi-depth H1 feature value	PROC_DATA	9, 3, 9
MD_RETRACT_LEVEL	Multi-depth retract level	OP_DATA - PROC_DATA	9, 0, 0
MD_VARY_WITH_FEAT	Multi-depth vary with feature	OP_DATA - PROC_DATA	9, 0, 0
MD_VARY_WITH_GEO	Multi-depth vary with geometry	OP_DATA - PROC_DATA	9, 0, 0
MDD_FILE	MDD filename	PART_DATA	9, 0, 0
MDD_NAME	MDD name	PART_DATA	9, 0, 0
METRIC_OUTPUT	Uses metric output	SET_POST_DATA	9, 0, 0
MFIXTURE_TOL	Mill fixture tolerance	OP_DATA - PROC_DATA	9, 0, 0
MILL_TYPE	Mill process type	PROC_DATA	9, 0, 0
MILL_TYPE	Mill operation type	OP_DATA	9, 0, 0
MIN_CUT	Minimum cut	OP_DATA - PROC_DATA	9, 0, 0
MIN_RAD	Minimum radius	OP_DATA - PROC_DATA	9, 0, 0
MINIMIZE	Minimize block numbers	SET_POST_DATA	9, 0, 0
MSTOCK_TOL	Stock tolerance	PROC_DATA	9, 0, 0
MSURF_CLEAR	Surface clearance	OP_DATA - PROC_DATA	9, 0, 0
MSURF_STOCK_TOL	Surface stock tolerance	OP_DATA	9, 0, 0
MSURFACE_CLEAR	Surface clearance	PROC_DATA	9, 0, 0
MTHREAD_CLEAR_DIA	Thread mill clear diameter	OP_DATA - PROC_DATA	9, 0, 0
MTHREAD_CUT_DIA	Thread mill cut diameter	OP_DATA - PROC_DATA	9, 0, 0
MTHREAD_END_THREAD	Thread mill end thread value	OP_DATA - PROC_DATA	9, 0, 0
MTHREAD_FEED	Thread mill feedrate	OP_DATA - PROC_DATA	9, 0, 0
MTHREAD_ID_OD	Thread mill ID or OD option	OP_DATA - PROC_DATA	9, 0, 0
MTHREAD_PITCH	Thread mill pitch	OP_DATA - PROC_DATA	9, 0, 0
MTHREAD_RAPID_IN	Thread mill rapid in option	PROC_DATA	9, 0, 0
MTHREAD_START_THREAD	Thread mill start thread	OP_DATA - PROC_DATA	9, 0, 0
MTHREAD_THREAD_DIR	Thread mill thread direction	OP_DATA - PROC_DATA	9, 0, 0
MTHREAD_TRAVERSE_CP1	Thread mill traverse at CP1	OP_DATA - PROC_DATA	9, 0, 0
MTOOL_BOTTOM_RAD	Mill tool bottom radius	TOOL_DATA	9, 0, 0
MTOOL_CORNER_RAD	Mill tool corner radius	TOOL_DATA	9, 0, 0
MTOOL_FLUTE_LENGTH	Mill tool flute length	TOOL_DATA	9, 0, 0
MTOOL_INNER_TOP_CORNER_RAD	Mill tool inner top corner radius	TOOL_DATA	9, 0, 0
MTOOL_LEAD_TIP	Mill tool lead tip value	TOOL_DATA	9, 0, 0
MTOOL_LEN_OFFSET	Mill tool length offset number	TOOL_DATA	9, 0, 0
MTOOL_LENGTH	Mill tool length	TOOL_DATA	9, 0, 0
MTOOL_NON_CUT_DIA	Non cutting diameter	TOOL_DATA	9, 0, 0
MTOOL_NUM_FLUTES	Mill tool number of flutes	TOOL_DATA	9, 0, 0
MTOOL_OPTIONS	Mill tool options is checked	TOOL_DATA	9, 0, 0
MTOOL_ORIENTATION	Mill tool orientation	TOOL_DATA	9, 0, 0
MTOOL_OUT_OF_HOLDER_LEN	Mill tool out of holder length	TOOL_DATA	9, 4, 24
MTOOL_PITCH_TPI	Mill tool pitch	TOOL_DATA	9, 0, 0
MTOOL_PRESET_X	Mill tool preset point in X	TOOL_DATA	9, 0, 0
MTOOL_PRESET_Y	Mill tool preset point in X	TOOL_DATA	9, 0, 0
MTOOL_PRESET_Z	Mill tool preset point in Z	TOOL_DATA	9, 0, 0
MTOOL_RADIUS	Mill tool radius	TOOL_DATA	9, 0, 0
MTOOL_SHANK_RAD	Mill tool shank radius	TOOL_DATA	9, 0, 0
MTOOL_TC_SHIFT_X	Mill tool TC shift in X	TOOL_DATA	9, 0, 0
MTOOL_TC_SHIFT_Y	Mill tool TC shift in Y	TOOL_DATA	9, 0, 0
MTOOL_TC_SHIFT_Z	Mill tool TC shift in Z	TOOL_DATA	9, 0, 0
MTOOL_TIP_ANGLE	Mill tool tip angle	TOOL_DATA	9, 0, 0
MTOOL_TIP_RAD	Mill tool tip radius	TOOL_DATA	9, 0, 0
MTOOL_TOP_CORNER_RAD	Mill tool top corner radius	TOOL_DATA	9, 0, 0
MTOOL_TOP_RAD	Mill tool top radius	TOOL_DATA	9, 0, 0
MTOOL_TYPE	Mill tool type	TOOL_DATA	9, 0, 0
MZSHIFT	Z shift amount	PROC_DATA	9, 0, 0
NUM_FLOWS	Total number of flows	PART_DATA	9, 0, 0
NUM_PARTS	Total number of parts	SET_POST_DATA	9, 0, 0
NUM_REPEATS	Number of repeats	OP_DATA	9, 0, 0
NUM_SPINDLES	Total number of spindles	PART_DATA	9, 0, 0
NUM_SPRING_PASSES	Number of spring passes	OP_DATA	9, 0, 0
NUM_TOOL_GROUPS	Total number of tool groups	PART_DATA	9, 0, 0
OD_ID_FACE	OD ID Face setting	OP_DATA	9, 0, 0
OFFSET	Offset number	TOOL_DATA	9, 0, 0
ONE_PART_ALL_TOOLS	One part all tools option	SET_POST_DATA	9, 0, 0
OP_END	Op end text	OP_DATA	9, 0, 0
OP_START	Op start text	OP_DATA	9, 0, 0
OP_STOPS	Optional stops setting	SET_POST_DATA	9, 0, 0
OPEN_CLEARANCE	Open clearance value	OP_DATA - PROC_DATA	9, 0, 0
ORIENTATION	Orientation	UTIL_PROC_DATA	9, 0, 0
OUTPUT_FILE	Output filename	SET_POST_DATA	9, 0, 0
OVERHANG	Overhang amount	OP_DATA - PROC_DATA	9, 0, 0
OVERLAP	Overlap amount	OP_DATA - PROC_DATA	9, 0, 0
PART_FILE	Part filename	PART_DATA	9, 0, 0
PART_IN_MAIN	Part is in main spindle	UTIL_PROC_DATA	9, 0, 0
PART_IN_SUB	Part is in sub spindle	UTIL_PROC_DATA	9, 0, 0
PART_NAME	Part name	PART_DATA	9, 0, 0
PART_SPACING_X	Part spacing in X	SET_POST_DATA	9, 0, 0
PART_SPACING_Y	Part spacing in Y	SET_POST_DATA	9, 0, 0
PART_SPACING_Z	Part spacing in Z	SET_POST_DATA	9, 0, 0
PAST_STOCK	Past stock amount	OP_DATA - PROC_DATA	9, 0, 0
PATH_CS	Toolpath CS number	OP_DATA - PROC_DATA	9, 0, 0
PATTERN_INDEX	Pattern index	OP_DATA - PROC_DATA	9, 3, 9
PATTERN_ON	Pattern on setting	OP_DATA - PROC_DATA	9, 3, 9
POCKET_ENTRY_HELIX_ANGLE	Pocket entry helix angle	OP_DATA - PROC_DATA	9, 0, 0
POCKET_ENTRY_HELIX_CP	Pocket entry helix CP value	OP_DATA - PROC_DATA	9, 0, 0
POCKET_ENTRY_HELIX_DIA	Pocket entry helix diameter	OP_DATA - PROC_DATA	9, 0, 0
POCKET_ENTRY_HELIX_MAX_CUT	Pocket entry maximum cut	OP_DATA - PROC_DATA	9, 0, 0
POCKET_ENTRY_HELIX_SLOPE	Pocket entry slope	OP_DATA - PROC_DATA	9, 0, 0
POCKET_ENTRY_HELIX_START_Z	Pocket entry start Z	OP_DATA - PROC_DATA	9, 0, 0
POCKET_ENTRY_HELIX_TYPE	Pocket entry helix type	OP_DATA - PROC_DATA	9, 0, 0
POCKET_ENTRY_HELIX_WALL_CLEAR	Pocket entry wall clearance	OP_DATA - PROC_DATA	9, 0, 0
POCKET_ENTRY_PERIPH_SLOPE	Pocket entry periphery slope	OP_DATA - PROC_DATA	9, 0, 0
POCKET_ENTRY_PERIPH_START_Z	Pocket entry periphery start Z position	OP_DATA - PROC_DATA	9, 0, 0
POCKET_ENTRY_PLUNGE_POINT	Pocket entry uses plunge point	OP_DATA	9, 0, 0
POCKET_ENTRY_PLUNGE_PT	Pocket entry plunge point	PROC_DATA	9, 0, 0
POCKET_ENTRY_RAMP	Pocket entry uses ramp	OP_DATA	9, 0, 0
POCKET_ENTRY_RAMP_ANGLE	Pocket entry ramp angle	OP_DATA - PROC_DATA	9, 0, 0
POCKET_ENTRY_RAMP_MAX_CUT	Pocket entry ramp maximum cut	OP_DATA	9, 0, 0
POCKET_ENTRY_RAMP_SLOPE	Pocket entry ramp slope	OP_DATA - PROC_DATA	9, 0, 0
POCKET_ENTRY_RAMP_START_Z	Pocket entry ramp start Z position	OP_DATA - PROC_DATA	9, 0, 0
POCKET_ENTRY_RAMP_TYPE	Pocket entry ramp type	PROC_DATA	9, 3, 9
POCKET_ENTRY_RAMP_WALL_CLEAR	Pocket entry ramp wall clearance	OP_DATA - PROC_DATA	9, 0, 0
POCKET_TYPE	Pocket type	OP_DATA - PROC_DATA	9, 0, 0
POST_FILE	post filename	SET_POST_DATA	9, 0, 0
PREF_FOOTER_CHARS	Footer in charactere preference	SET_POST_DATA	9, 0, 0
PREF_FOOTER_FEET	Footer in feet preference	SET_POST_DATA	9, 0, 0
PREF_FOOTER_METERS	Footer in meters preference	SET_POST_DATA	9, 0, 0
PREF_FOOTER_METRES	Footer in metres preference	SET_POST_DATA	9, 0, 0
PREF_HEADER_ABS_INC	Header ABS INC preference	SET_POST_DATA	9, 0, 0
PREF_HEADER_DATE_TIME	header time preference	SET_POST_DATA	9, 0, 0
PREF_HEADER_FORMAT_CODE	Header format code preference	SET_POST_DATA	9, 0, 0
PREF_HEADER_FORMAT_NAME	Header format name preference	SET_POST_DATA	9, 0, 0
PREF_HEADER_NUM_PARTS	header number of parts preference	SET_POST_DATA	9, 0, 0
PREF_HEADER_PROG_COMMENT	Header progam comment preference	SET_POST_DATA	9, 0, 0
PREF_HEADER_PROG_NAME	header pogram name preference	SET_POST_DATA	9, 0, 0
PREF_HEADER_SPECIAL	Header special data preference	SET_POST_DATA	9, 0, 0
PREF_HEADER_START_TOOL	Header start tool preference	SET_POST_DATA	9, 0, 0
PREF_OP_OP_COMMENT	Op comment option	SET_POST_DATA	9, 0, 0
PREF_OP_OPNUM_TYPE	Op number type option	SET_POST_DATA	9, 0, 0
PREF_OP_TOOL_COMMENT	Tool comment option	SET_POST_DATA	9, 0, 0
PREF_OP_TOOLNUM_TYPE	Tool number type option	SET_POST_DATA	9, 0, 0
PREF_OP_WG_COMMENT	WorkgGroup comment option	SET_POST_DATA	9, 0, 0
PREF_SUB	Prefer subs setting	SET_POST_DATA	9, 0, 0
PREFER_SUBS	Prefer subs setting	PROC_DATA -OP_DATA	9, 3, 9
PRIME_SPINDLE	Prime spindle number	TOOL_DATA	9, 0, 0
PROC_GROUP	Process group number	OP_DATA	9, 0, 0
PROC_ID	Process ID number	OP_DATA	9, 0, 0
PROC_OP	Process operation number	OP_DATA	9, 0, 0
PROG_STOP	Program stop option	OP_DATA - PROC_DATA	9, 3, 9
PULLBACK	Pullback amount	UTIL_PROC_DATA	9, 0, 0
RADIUS	Part radius	PART_DATA	9, 0, 0
RAPID_CLEARANCE	Rapid clearance	OP_DATA - PROC_DATA	9, 0, 0
RAPID_IN	Rapid in	OP_DATA - PROC_DATA	9, 3, 9
REPEATS	Use repeats	PROC_DATA	9, 0, 0
RETRACTS	Use retracts	OP_DATA - PROC_DATA	9, 3, 9
ROUND_CORNERS	Round corners option	OP_DATA - PROC_DATA	9, 3, 9
RPM	Spindle speed	OP_DATA - PROC_DATA	9, 0, 0
S_USE_ADV_TOL	Use advanced tolerance	OP_DATA - PROC_DATA	9, 3, 9
SAME_STROKE	Same stroke option	OP_DATA - PROC_DATA	9, 3, 9
SCALLOP_FEED	Scallop feed amount	OP_DATA - PROC_DATA	9, 0, 0
SCALLOP_FEED_LOCK	Scallop feed lock	OP_DATA - PROC_DATA	9, 3, 9
SELECTED_OPS	Post selected oerations	SET_POST_DATA	9, 0, 0
SEQ_BY	Block seq by value	SET_POST_DATA	9, 0, 0
SEQ_FROM	Block seq from value	SET_POST_DATA	9, 0, 0
SFLOCUT_TYPE	Surface flow cut type	OP_DATA	9, 0, 0
SFLOW_MACH_DIR	Surface flow machining direction	OP_DATA	9, 0, 0
SFLOW_MACH_ZORDER	Surface flow machining Z order	OP_DATA	9, 0, 0
SFLOW_TRAVEL_AROUND_MODE	Surface flow travel around mode	OP_DATA	9, 0, 0
SHIFT_DISTANCE	Shift distance	UTIL_PROC_DATA	9, 0, 0
SPIN_CONTROL	Spindle control option	OP_DATA	9, 0, 0
SPINDLE_DIR	Spindle direction	TOOL_DATA	9, 0, 0
SPINDLE_NUM	Spindle number	UTIL_PROC_DATA	9, 0, 0
SPINDLE_ON	Spindle is on	UTIL_PROC_DATA	9, 0, 0
SPINDLE_SPEED	Spindle speed	UTIL_PROC_DATA	9, 0, 0
SPINDLE_UNLOADED	Spindle is unloaded	UTIL_PROC_DATA	9, 0, 0
SPINDLE_USED	Spindle is used	SET_POST_DATA	9, 0, 0
START_ON_RIGHT	Start on right	OP_DATA - PROC_DATA	9, 0, 0
START_PROG_NUM	Start program number	SET_POST_DATA	9, 0, 0
STAY_CLEAR	Stay clear option	OP_DATA - PROC_DATA	9, 3, 9
STEP	Step value	OP_DATA	9, 0, 0
STEPOVER_FEED	Stepover feed value	OP_DATA - PROC_DATA	9, 0, 0
STEPOVER_FEED_LOCK	Stepover feed lock	OP_DATA - PROC_DATA	9, 3, 9
STOCK	Stock amount	OP_DATA - PROC_DATA	9, 3, 9
STOCK_DIA	Stock diameter	SET_POST_DATA	9, 0, 0
STOCK_RAD	Stock radius	PART_DATA - SET_POST_DATA	9, 0, 0
STOCK_X1	Stock X1 position	PART_DATA	9, 0, 0
STOCK_X2	Stock X2 position	PART_DATA	9, 0, 0
STOCK_Y1	Stock Y1 position	PART_DATA	9, 0, 0
STOCK_Y2	Stock Y2 position	PART_DATA	9, 0, 0
STOCK_Z1	Stock X1 position	PART_DATA - POST_DATA	9, 0, 0
STOCK_Z2	Stock Z2 position	PART_DATA - POST_DATA	9, 0, 0
SUB_IN_UNLOAD	Sub spindle in unload	UTIL_PROC_DATA	9, 0, 0
SURF_STOCK	Surface stock	OP_DATA	9, 0, 0
SURF_Z	Surface Z value	PROC_DATA	9, 3, 9
SURFACE_ARC_FIT_TOL	Surface arc fit tolerance	OP_DATA - PROC_DATA	9, 0, 0
SURFACE_BACK_AND_FORTH	Surface back and forth option	PROC_DATA	9, 0, 0
SURFACE_BACK_FORTH	Surface back and forth option	OP_DATA	9, 0, 0
SURFACE_CFEED	Surface contour feedrate	PROC_DATA	9, 3, 9
SURFACE_CLEANUP_TYPE	Surface cleanup type	PROC_DATA	9, 4, 12
SURFACE_CLEAR_STOCK	Surface clear stock amount	OP_DATA - PROC_DATA	9, 0, 0
SURFACE_CLEAR_STOCK_TYPE	Surface clear stock type	OP_DATA - PROC_DATA	9, 0, 0
SURFACE_CONST_FACES_CLEAR	Surface constant faces clear value	PROC_DATA	9, 3, 9
SURFACE_CONSTRAIN	Surface constraint amount	OP_DATA - PROC_DATA	9, 0, 0
SURFACE_CONSTRAINT_FACES_CLEAR	Surface constraint faces clear option	OP_DATA	9, 0, 0
SURFACE_CONSTRAINT_TOL	Surface constraint tolerance	OP_DATA - PROC_DATA	9, 0, 0
SURFACE_CORNER_RAD	Surface corner radius	OP_DATA - PROC_DATA	9, 0, 0
SURFACE_CURVE_CUT_DIR	Surface curve cut direction	OP_DATA	9, 0, 0
SURFACE_CUT_ANGLE	Surface cut angle	OP_DATA - PROC_DATA	9, 0, 0
SURFACE_CUT_OPT	Surface cut option	OP_DATA - PROC_DATA	9, 0, 0
SURFACE_CUT_OVER_EDGES	Surface cut over edges	OP_DATA - PROC_DATA	9, 0, 0
SURFACE_CUT_TOL	Surface cut tolerance	PROC_DATA	9, 3, 9
SURFACE_CUT_TYPE	Surface cut type	OP_DATA - PROC_DATA	9, 0, 0
SURFACE_CUTS_TYPE	Surface cuts type	PROC_DATA	9, 0, 0
SURFACE_DEPTH	Surface depth of cut	OP_DATA	9, 0, 0
SURFACE_DESIRED_Z	Surface desired Z depth	OP_DATA - PROC_DATA	9, 0, 0
SURFACE_EFEED	Surface entry feedrate	PROC_DATA	9, 3, 9
SURFACE_ENTRY_PLUNGE_PT	Surface entry plunge point	OP_DATA - PROC_DATA	9, 0, 0
SURFACE_ENTRY_RAMP_TYPE	Surface entry ramp type	OP_DATA - PROC_DATA	9, 3, 9
SURFACE_ENTRY_TYPE	Surface entry type	OP_DATA - PROC_DATA	9, 3, 9
SURFACE_FIXTURE_CLEAR	Surface fixture clearance	PROC_DATA	9, 3, 9
SURFACE_FIXTURE_TOL	Surface fixture tolerance	OP_DATA - PROC_DATA	9, 0, 0
SURFACE_FLOW_CUT_TYPE	Surface flow cut direction	PROC_DATA	9, 0, 0
SURFACE_FLOW_MACH_DIR	Surface flow machining direction	PROC_DATA	9, 0, 0
SURFACE_FLOW_MACH_Z_ORDER	Surface flow machining Z order	PROC_DATA	9, 0, 0
SURFACE_FLOW_TRAVEL_AROUND_MODE	Surface flow travel around mode	PROC_DATA	9, 0, 0
SURFACE_INTERSECT_TYPE	Surface intersection type	PROC_DATA	9, 0, 0
SURFACE_LACE_CUT_DIR	Surface lace cut direction	PROC_DATA - OP_DATA	9, 0, 0
SURFACE_MAX_CUT_ANGLE	Surface maximum cut angle	OP_DATA - PROC_DATA	9, 3, 9
SURFACE_NORMAL_ANGLE	Surface normal angle	OP_DATA - PROC_DATA	9, 0, 0
SURFACE_OFFSET_SURFACES	Surface offset surfaces option	PROC_DATA	9, 0, 0
SURFACE_OFFSET_SURFS	Surface offset surfaces option	OP_DATA	9, 0, 0
SURFACE_ONE_PASS	Surface one pass option	OP_DATA - PROC_DATA	9, 0, 0
SURFACE_OUTPUT_PREF	Surface output preference	OP_DATA - PROC_DATA	9, 0, 0
SURFACE_PASSES_PER_SIDE	Surface number of passes per side	PROC_DATA	9, 0, 0
SURFACE_PASSES_TYPE	Surface pass type	PROC_DATA	9, 0, 0
SURFACE_RETRACT_OPT	Surface retract option	OP_DATA	9, 0, 0
SURFACE_RETRACT_OPTION	Surface retract option	PROC_DATA	9, 0, 0
SURFACE_RIDGE_HEIGHT	Surface ridge height	PROC_DATA - OP_DATA	9, 3, 9
SURFACE_SKIP_FLATS	Surface skip flats option	OP_DATA - PROC_DATA	9, 0, 0
SURFACE_SMOOTH_TOL	Surface smoothing tolerance	OP_DATA - PROC_DATA	9, 0, 0
SURFACE_SPLINE_APPROX_TOL	Surface spline approximation tolerance	PROC_DATA	9, 3, 9
SURFACE_SPLINE_TOL	Surface spline tolerance	OP_DATA	9, 0, 0
SURFACE_STAY_IN_STOCK	Surface stay in stock option	OP_DATA - PROC_DATA	9, 0, 0
SURFACE_STEP_CUT_RATIO	Surface stepover cut ration	PROC_DATA -OP_DATA	9, 3, 9
SURFACE_STEP_OVER	Surface stepover	OP_DATA	9, 0, 0
SURFACE_STEPOVER	Surface stepover	PROC_DATA	9, 3, 9
SURFACE_STOCK	Surface stock amount	OP_DATA - PROC_DATA	9, 0, 0
SURFACE_STOCK_TOL	Surface stock tolerance	OP_DATA - PROC_DATA	9, 0, 0
SURFACE_TYPE	Surface type	OP_DATA - PROC_DATA	9, 0, 0
SURFACE_Z	Surface Z value	PROC_DATA	9, 3, 9
SURRFACE_DEPTH	Surface depth	OP_DATA	9, 0, 0
TG_COUNT	Total number of ToolGroups	PART_DATA	9, 0, 0
TIME	Time	OP_DATA - PROC_DATA	9, 0, 0
TIP_Z	Tip Z position	PROC_DATA	9, 3, 9
TO_WORKPIECE	To workpiece option	UTIL_PROC_DATA	9, 0, 0
TOOL_CHANGE	Toolchange option	PROC_DATA	9, 0, 0
TOOL_CHANGE_X	Toolchange position in X	PART_DATA - GET_TG_DATA	9, 0, 0
TOOL_CHANGE_Y	Toolchange position in Y	PART_DATA - GET_TG_DATA	9, 0, 0
TOOL_CHANGE_Z	Toolchange position in Z	PART_DATA - GET_TG_DATA	9, 0, 0
TOOL_GROUP	ToolGroup number	OP_DATA - PROC_DATA	9, 0, 0
TOOL_GROUP_POS	ToolGroup position	TOOL_DATA	9, 0, 0
TOOL_NEG_SIDE	Negative side option	TOOL_DATA	9, 0, 0
TOOL_NUM	Tool number	OP_DATA - PROC_DATA	9, 0, 0
TOOLGROUP	ToolGroup number	TOOL_DATA	9, 0, 0
TORQUE_SENSING	Torque sensing option	UTIL_PROC_DATA	9, 0, 0
TORQUE_VAL	Torque value	UTIL_PROC_DATA	9, 0, 0
TYPE	Tool type	TOOL_DATA	9, 0, 0
TYPE	Operation type	OP_DATA	9, 0, 0
TYPE	Process type	PROC_DATA	9, 0, 0
TYPE	Part type	PART_DATA	9, 0, 0
UNITS	Part units	PART_DATA	9, 0, 0
USE_ID	Tool uses ID	TOOL_DATA	9, 0, 0
UTIL_TYPE	Utility type	OP_DATA	9, 0, 0
WALL_ANG	Wall angle	OP_DATA	9, 0, 0
WALL_ANGLE	Wall angle	PROC_DATA	9, 0, 0
WALL_BOT	Wall bottom value	OP_DATA	9, 0, 0
WALL_BOTTOM	Wall bottom value	PROC_DATA	9, 0, 0
WALL_DCEP_SIDE	Wall DCEP side value	OP_DATA	9, 0, 0
WALL_IANG	Internal wall angle	OP_DATA	9, 0, 0
WALL_IBOT	Internal wall bottom	OP_DATA	9, 0, 0
WALL_ITOP	Internal wall top	OP_DATA	9, 0, 0
WALL_MODE	Wall mode	OP_DATA - PROC_DATA	9, 0, 0
WALL_RIDGE_HEIGHT	Wall ridge height	OP_DATA - PROC_DATA	9, 0, 0
WALL_SAME_DCEP_SIDE	Wall same side DCEP	PROC_DATA	9, 3, 9
WALL_SAME_DIR	Wall same direction option	OP_DATA - PROC_DATA	9, 0, 0
WALL_SHAPE_STEP	Wall uses shape step	OP_DATA - PROC_DATA	9, 0, 0
WALL_STEP	Wall step amount	OP_DATA - PROC_DATA	9, 0, 0
WALL_SWEPT_ISLAND	Wall uses swept islands	OP_DATA - PROC_DATA	9, 0, 0
WALL_SWEPT_POCKET	Wall uses swept pockets	OP_DATA - PROC_DATA	9, 0, 0
WALL_TOP	Wall top	OP_DATA - PROC_DATA	9, 0, 0
WALL_TOP_TO_BOTTOM	Wall cut from top to bottom	OP_DATA - PROC_DATA	9, 3, 9
WALL_USER_STEP	Wall user step amount	OP_DATA - PROC_DATA	9, 0, 0
WALLI_ANGLE	Internal wall angle	PROC_DATA	9, 0, 0
WALLI_BOTTOM	Internal wall bottom	PROC_DATA	9, 0, 0
WALLI_TOP	Internal wall top	PROC_DATA	9, 0, 0
WG_NUM	WorkGroup number	OP_DATA	9, 0, 0
WORK_FIXTURES	Use work fixtures	SET_POST_DATA	9, 0, 0
WORKPIECE	Workpiece number	OP_DATA	9, 0, 0
WP_COUNT	Workpiece count	PART_DATA	9, 0, 0
WRAP	Wrap option	OP_DATA - PROC_DATA	9, 3, 9
WRAP_COPY_ANGLE	Wrap duplication angle	PROC_DATA	9, 0, 0
WRAP_DUP_ANGLE	Wrap duplication angle	OP_DATA	9, 0, 0
WRAP_DUPS	Wrap number of duplications	OP_DATA	9, 0, 0
WRAP_NUM_COPIES	Wrap number of duplications	PROC_DATA	9, 3, 9
WRAP_START_ANGLE	Wrap start angle	OP_DATA - PROC_DATA	9, 0, 0
X_CLEARANCE	X clearance value	UTIL_PROC_DATA	9, 0, 0
X_DROP	X drop value	UTIL_PROC_DATA	9, 0, 0
X_HOME	X home option	UTIL_PROC_DATA	9, 0, 0
X_POSITION	X position value	UTIL_PROC_DATA	9, 0, 0
X_VALUE	X value	UTIL_PROC_DATA	9, 0, 0
Z_CLEARANCE	Z clearance value	UTIL_PROC_DATA	9, 0, 0
Z_DROP	Z drop value	UTIL_PROC_DATA	9, 0, 0
Z_HOME	Z home option	UTIL_PROC_DATA	9, 0, 0
Z_POSITION	Z postition	UTIL_PROC_DATA	9, 0, 0
Z_STEP	Actual Z stepover	OP_DATA - PROC_DATA	9, 0, 0
Z_STEP_WANTED	Z stepover desired	OP_DATA - PROC_DATA	9, 3, 9
Z_VALUE	Z value	UTIL_PROC_DATA	9, 0, 0
ZIG_ZAG	Zigzag option	OP_DATA	9, 0, 0
}