All Variables: Difference between revisions

From Macros Wiki
Jump to navigationJump to search
← Older editNewer edit →
ConnerO (talk | contribs)
GibbsDevs
5,024 edits
No edit summary
ConnerO (talk | contribs)
GibbsDevs
5,024 edits
No edit summary
Line 1: Line 1:
{| border="1"
{| border="1"
|-
|-
|'''These variables are set by some of the macro commands'''||'''Set by''' || '''Version Number'''
|'''These variables are set by some of the macro commands'''||'''by the system''' || '''Version Number'''
|-
|-
| align=“left” |Button || Number of button pressed on macro dialog. ( OK button = zero ) ||9, 4, 25
| align=“left” |Button || Number of button pressed on macro dialog. ( OK button = zero ) ||9, 4, 25
Line 11: Line 11:
| align=“left” |CsNumber || Number of CS created by the [[NEW_CS]] command ||9, 4, 25
| align=“left” |CsNumber || Number of CS created by the [[NEW_CS]] command ||9, 4, 25
|-
|-
| align="left" |CURRENT_CS_NUM|| Variable set automatically by the system when a coordinate system is selected or created || 9, 0, 0
| align="left" |CURRENT_CS_NUM|| by the system when a coordinate system is selected or created || 9, 0, 0
|-
|-
| align="left" |CURRENT_WG_NUM||Variable set automatically by the system when a workgroup is selected or created || 9, 0, 0
| align="left" |CURRENT_WG_NUM||by the system when a workgroup is selected or created || 9, 0, 0
|-
|-
| align=“left” |ExcelCellLength || Variable set automatically by the system when using the [[EXCEL_FIND_CELL]] command ||9, 4, 25
| align=“left” |ExcelCellLength || by the system when using the [[EXCEL_FIND_CELL]] command ||9, 4, 25
|-
|-
| align=“left” |ExcelError || Error code set by all [[:Category:Excel|Excel]] commands ||9, 4, 25
| align=“left” |ExcelError || Error code set by all [[:Category:Excel|Excel]] commands ||9, 4, 25
|-
|-
| align="left" |EXCEL_IS_OPEN||Variable set automatically by the system dictating whether or not an excel file is open || 9, 0, 0
| align="left" |EXCEL_IS_OPEN||whether or not an excel file is open || 9, 0, 0
|-
|-
| align="left" |EXCEL_IS_VISIBLE||Variable set automatically by the system dictating whether or not an excel file is visible|| 9, 0, 0
| align="left" |EXCEL_IS_VISIBLE||whether or not an excel file is visible|| 9, 0, 0
|-
|-
| align="left" |FEAT_TYPE_ARC|| Variable set automatically by the system about a feature type||9, 0, 0
| align="left" |FEAT_TYPE_ARC|| a feature type||9, 0, 0
|-
|-
| align="left" |FEAT_TYPE_CTOOL|| Variable set automatically by the system about a feature type ||9, 0, 0
| align="left" |FEAT_TYPE_CTOOL|| a feature type ||9, 0, 0
|-
|-
| align="left" |FEAT_TYPE_CURVE|| Variable set automatically by the system about a feature type ||9, 0, 0
| align="left" |FEAT_TYPE_CURVE|| a feature type ||9, 0, 0
|-
|-
| align="left" |FEAT_TYPE_LINE_IJK|| Variable set automatically by the system about a feature type ||9, 0, 0
| align="left" |FEAT_TYPE_LINE_IJK|| a feature type ||9, 0, 0
|-
|-
| align="left" |FEAT_TYPE_LINE|| Variable set automatically by the system about a feature type ||9, 0, 0
| align="left" |FEAT_TYPE_LINE|| a feature type ||9, 0, 0
|-
|-
| align="left" |FEAT_TYPE_MARKER|| Variable set automatically by the system about a feature type ||9, 0, 0
| align="left" |FEAT_TYPE_MARKER|| a feature type ||9, 0, 0
|-
|-
| align="left" |FEAT_TYPE_POINT|| Variable set automatically by the system about a feature type ||9, 0, 0
| align="left" |FEAT_TYPE_POINT|| a feature type ||9, 0, 0
|-
|-
| align="left" |FEAT_TYPE_RAPID|| Variable set automatically by the system about a feature type ||9, 0, 0
| align="left" |FEAT_TYPE_RAPID|| a feature type ||9, 0, 0
|-
|-
| align="left" |FEAT_TYPE_SPLINE|| Variable set automatically by the system about a feature type ||9, 0, 0
| align="left" |FEAT_TYPE_SPLINE|| a feature type ||9, 0, 0
|-
|-
| align=“left” |FileError || Error code set by all file commands ||9, 4, 25
| align=“left” |FileError || Error code set by all file commands ||9, 4, 25
|-
|-
| align="left" |GIBBSCAM_VERSION_1||Variable set automatically by the system dictating the version of gibbscam running|| 9, 4, 24
| align="left" |GIBBSCAM_VERSION_1||the version of gibbscam running|| 9, 4, 24
|-
|-
| align="left" |GIBBSCAM_VERSION_2||Variable set automatically by the system dictating the version of gibbscam running || 9, 4, 24
| align="left" |GIBBSCAM_VERSION_2||the version of gibbscam running || 9, 4, 24
|-
|-
| align="left" |GIBBSCAM_VERSION_3||Variable set automatically by the system dictating the version of gibbscam running || 9, 4, 24
| align="left" |GIBBSCAM_VERSION_3||the version of gibbscam running || 9, 4, 24
|-
|-
| align="left" |GIBBSCAM_WINDOW_X1||Variable set automatically by the system dictating the first x position of the gibbscam window || 9, 0, 0
| align="left" |GIBBSCAM_WINDOW_X1||the first x position of the gibbscam window || 9, 0, 0
|-
|-
| align="left" |GIBBSCAM_WINDOW_X2||Variable set automatically by the system dictating the second x position of the gibbscam window || 9, 0, 0
| align="left" |GIBBSCAM_WINDOW_X2||the second x position of the gibbscam window || 9, 0, 0
|-
|-
| align="left" |GIBBSCAM_WINDOW_Y1||Variable set automatically by the system dictating the first y position of the gibbscam window || 9, 0, 0
| align="left" |GIBBSCAM_WINDOW_Y1||the first y position of the gibbscam window || 9, 0, 0
|-
|-
| align="left" |GIBBSCAM_WINDOW_Y2||Variable set automatically by the system dictating the second y position of the gibbscam window || 9, 0, 0
| align="left" |GIBBSCAM_WINDOW_Y2||the second y position of the gibbscam window || 9, 0, 0
|-
|-
| align=“left” |HoleFrAngle ||Variable set automatically when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
| align=“left” |HoleFrAngle ||when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
|-
|-
| align=“left” |HoleFrBottom ||Variable set automatically when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
| align=“left” |HoleFrBottom ||when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
|-
|-
| align=“left” |HoleFrBottomClear ||Variable set automatically when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
| align=“left” |HoleFrBottomClear ||when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
|-
|-
| align=“left” |HoleFrBottomZ ||Variable set automatically when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
| align=“left” |HoleFrBottomZ ||when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
|-
|-
| align=“left” |HoleFrCS ||Variable set automatically when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
| align=“left” |HoleFrCS ||when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
|-
|-
| align=“left” |HoleFrDepth ||Variable set automatically when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
| align=“left” |HoleFrDepth ||when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
|-
|-
| align=“left” |HoleFrDia ||Variable set automatically when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
| align=“left” |HoleFrDia ||when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
|-
|-
| align=“left” |HoleFrDiaTop ||Variable set automatically when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
| align=“left” |HoleFrDiaTop ||when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
|-
|-
| align=“left” |HoleFrError || Error code set by all [[:Category:Hole_Manager|HOLEFR]] commands ||9, 4, 25
| align=“left” |HoleFrError || Error code set by all [[:Category:Hole_Manager|HOLEFR]] commands ||9, 4, 25
|-
|-
| align=“left” |HoleFrFullDepth ||Variable set automatically when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
| align=“left” |HoleFrFullDepth ||when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
|-
|-
| align=“left” |HoleFrMidDepth ||Variable set automatically when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
| align=“left” |HoleFrMidDepth ||when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
|-
|-
| align=“left” |HoleFrPosAxisX ||Variable set automatically when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
| align=“left” |HoleFrPosAxisX ||when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
|-
|-
| align=“left” |HoleFrPosAxisY ||Variable set automatically when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
| align=“left” |HoleFrPosAxisY ||when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
|-
|-
| align=“left” |HoleFrPosAxisZ ||Variable set automatically when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
| align=“left” |HoleFrPosAxisZ ||when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
|-
|-
| align=“left” |HoleFrPosTopX ||Variable set automatically when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
| align=“left” |HoleFrPosTopX ||when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
|-
|-
| align=“left” |HoleFrPosTopY ||Variable set automatically when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
| align=“left” |HoleFrPosTopY ||when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
|-
|-
| align=“left” |HoleFrPosTopZ ||Variable set automatically when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
| align=“left” |HoleFrPosTopZ ||when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
|-
|-
| align=“left” |HoleFrPosX ||Variable set automatically when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
| align=“left” |HoleFrPosX ||when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
|-
|-
| align=“left” |HoleFrPosY ||Variable set automatically when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
| align=“left” |HoleFrPosY ||when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
|-
|-
| align=“left” |HoleFrPosZ ||Variable set automatically when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
| align=“left” |HoleFrPosZ ||when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
|-
|-
| align=“left” |HoleFrRef ||Variable set automatically when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
| align=“left” |HoleFrRef ||when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
|-
|-
| align=“left” |HoleFrRevCS ||Variable set automatically when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
| align=“left” |HoleFrRevCS ||when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
|-
|-
| align=“left” |HoleFrThroughType ||Variable set automatically when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
| align=“left” |HoleFrThroughType ||when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
|-
|-
| align=“left” |HoleFrtipAngle ||Variable set automatically when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
| align=“left” |HoleFrtipAngle ||when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
|-
|-
| align=“left” |HoleFrTop ||Variable set automatically when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
| align=“left” |HoleFrTop ||when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
|-
|-
| align=“left” |HoleFrTopClear ||Variable set automatically when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
| align=“left” |HoleFrTopClear ||when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
|-
|-
| align=“left” |HoleFrTopZ ||Variable set automatically when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
| align=“left” |HoleFrTopZ ||when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
|-
|-
| align=“left” |HoleFrType ||Variable set automatically when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
| align=“left” |HoleFrType ||when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
|-
|-
| align=“left” |HoleFrWidth ||Variable set automatically when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
| align=“left” |HoleFrWidth ||when using the [[HOLEFR_GET_FEAT]] command || 9, 4, 25
|-
|-
| align=“left” |LineRef || Number of line created by a line [[:Geometry:Creating_Geometry|geometry]] command||9, 4, 25
| align=“left” |LineRef || Number of line created by a line [[:Geometry:Creating_Geometry|geometry]] command||9, 4, 25
|-
|-
| align="left" |MTOOL_HOLDER || Variable set automatically reporting the mill tool holder || 9, 0, 0
| align="left" |MTOOL_HOLDER || the mill tool holder || 9, 0, 0
|-
|-
| align="left" |MTOOL_HOLDER_TYPE || Variable set automatically reporting the mill tool holder type || 9, 4, 24
| align="left" |MTOOL_HOLDER_TYPE || the mill tool holder type || 9, 4, 24
|-
|-
| align="left" |MTOOL_HOLDER_TYPE_BORE|| Variable set automatically reporting if the mill tool holder is bore ||9, 4, 24
| align="left" |MTOOL_HOLDER_TYPE_BORE|| if the mill tool holder is bore ||9, 4, 24
|-
|-
| align="left" |MTOOL_HOLDER_TYPE_COLLET|| Variable set automatically reporting if the mill tool holder is a collet ||9, 4, 24
| align="left" |MTOOL_HOLDER_TYPE_COLLET|| if the mill tool holder is a collet ||9, 4, 24
|-
|-
| align="left" |MTOOL_HOLDER_TYPE_DRILL|| Variable set automatically reporting if the mill tool holder is a drill ||9, 4, 24
| align="left" |MTOOL_HOLDER_TYPE_DRILL|| if the mill tool holder is a drill ||9, 4, 24
|-
|-
| align="left" |MTOOL_HOLDER_TYPE_MILL|| Variable set automatically reporting if the mill tool holder is a mill ||9, 4, 24
| align="left" |MTOOL_HOLDER_TYPE_MILL|| if the mill tool holder is a mill ||9, 4, 24
|-
|-
| align="left" |MTOOL_HOLDER_TYPE_ROT_CLAMP|| Variable set automatically reporting if the mill tool holder is a rotary clamp ||9, 4, 24
| align="left" |MTOOL_HOLDER_TYPE_ROT_CLAMP|| if the mill tool holder is a rotary clamp ||9, 4, 24
|-
|-
| align="left" |MTOOL_HOLDER_TYPE_SHELL|| Variable set automatically reporting if the mill tool holder is a shell ||9, 4, 24
| align="left" |MTOOL_HOLDER_TYPE_SHELL|| if the mill tool holder is a shell ||9, 4, 24
|-
|-
| align="left" |MTOOL_HOLDER_TYPE_SHRINK_FIT|| Variable set automatically reporting if the mill tool holder is a shrink fit ||9, 4, 24
| align="left" |MTOOL_HOLDER_TYPE_SHRINK_FIT|| if the mill tool holder is a shrink fit ||9, 4, 24
|-
|-
| align="left" |MTOOL_HOLDER_TYPE_TAP|| Variable set automatically reporting if the mill tool holder is a tap ||9, 4, 24
| align="left" |MTOOL_HOLDER_TYPE_TAP|| if the mill tool holder is a tap ||9, 4, 24
|-
|-
| align="left" |MTOOL_HOLDER_TYPE_TG_COLLET|| Variable set automatically reporting if the mill tool holder is a tool group ||9, 4, 24
| align="left" |MTOOL_HOLDER_TYPE_TG_COLLET|| if the mill tool holder is a tool group ||9, 4, 24
|-
|-
| align="left" |PLUGIN_VERSION_1||Variable set automatically by the system dictating the version of plugin running || 9, 4, 24
| align="left" |PLUGIN_VERSION_1||the version of plugin running || 9, 4, 24
|-
|-
| align="left" |PLUGIN_VERSION_2||Variable set automatically by the system dictating the version of plugin running || 9, 4, 24
| align="left" |PLUGIN_VERSION_2||the version of plugin running || 9, 4, 24
|-
|-
| align="left" |PLUGIN_VERSION_3||Variable set automatically by the system dictating the version of plugin running || 9, 4, 24
| align="left" |PLUGIN_VERSION_3||the version of plugin running || 9, 4, 24
|-
|-
| align=“left” |PointRef || Number of point created by a point [[:Geometry:Creating_Geometry|geometry]] command||9, 4, 25
| align=“left” |PointRef || Number of point created by a point [[:Geometry:Creating_Geometry|geometry]] command||9, 4, 25
Line 149: Line 149:
| align=“left” |ReadVarsNumVars || Number of variables read using READ_NUM_VARS command ||9, 4, 25
| align=“left” |ReadVarsNumVars || Number of variables read using READ_NUM_VARS command ||9, 4, 25
|-
|-
| align="left" |SCREEN_HEIGHT||Variable set automatically by the system dictating the height of the screen|| 9, 0, 0
| align="left" |SCREEN_HEIGHT||the height of the screen|| 9, 0, 0
|-
|-
| align="left" |SCREEN_WIDTH||Variable set automatically by the system dictating the height of the screen ||9, 0, 0
| align="left" |SCREEN_WIDTH||the height of the screen ||9, 0, 0
|-
|-
| align=“left” |SolidRef || Number of solid created by an [[EXTRUDE_SHAPE]] command||9, 4, 25
| align=“left” |SolidRef || Number of solid created by an [[EXTRUDE_SHAPE]] command||9, 4, 25
|-
|-
| align="left" |TOOL_ORIENT_DL|| Variable set automatically reporting if the tool orientation is down left ||9, 4, 24
| align="left" |TOOL_ORIENT_DL|| if the tool orientation is down left ||9, 4, 24
|-
|-
| align="left" |TOOL_ORIENT_DOWN_LEFT|| Variable set automatically reporting if the tool orientation is down left ||9, 4, 24
| align="left" |TOOL_ORIENT_DOWN_LEFT|| if the tool orientation is down left ||9, 4, 24
|-
|-
| align="left" |TOOL_ORIENT_DOWN_RIGHT|| Variable set automatically reporting if the tool orientation is down right ||9, 4, 24
| align="left" |TOOL_ORIENT_DOWN_RIGHT|| if the tool orientation is down right ||9, 4, 24
|-
|-
| align="left" |TOOL_ORIENT_DR|| Variable set automatically reporting if the tool orientation is down right ||9, 4, 24
| align="left" |TOOL_ORIENT_DR|| if the tool orientation is down right ||9, 4, 24
|-
|-
| align="left" |TOOL_ORIENT_LD|| Variable set automatically reporting if the tool orientation is left down ||9, 4, 24
| align="left" |TOOL_ORIENT_LD|| if the tool orientation is left down ||9, 4, 24
|-
|-
| align="left" |TOOL_ORIENT_LEFT_DOWN|| Variable set automatically reporting if the tool orientation is left down ||9, 4, 24
| align="left" |TOOL_ORIENT_LEFT_DOWN|| if the tool orientation is left down ||9, 4, 24
|-
|-
| align="left" |TOOL_ORIENT_LEFT_UP|| Variable set automatically reporting if the tool orientation is left up ||9, 4, 24
| align="left" |TOOL_ORIENT_LEFT_UP|| if the tool orientation is left up ||9, 4, 24
|-
|-
| align="left" |TOOL_ORIENT_LU|| Variable set automatically reporting if the tool orientation is left up ||9, 4, 24
| align="left" |TOOL_ORIENT_LU|| if the tool orientation is left up ||9, 4, 24
|-
|-
| align="left" |TOOL_ORIENT_RD|| Variable set automatically reporting if the tool orientation is right down ||9, 4, 24
| align="left" |TOOL_ORIENT_RD|| if the tool orientation is right down ||9, 4, 24
|-
|-
| align="left" |TOOL_ORIENT_RIGHT_DOWN|| Variable set automatically reporting if the tool orientation is right down ||9, 4, 24
| align="left" |TOOL_ORIENT_RIGHT_DOWN|| if the tool orientation is right down ||9, 4, 24
|-
|-
| align="left" |TOOL_ORIENT_RIGHT_UP|| Variable set automatically reporting if the tool orientation is right up ||9, 4, 24
| align="left" |TOOL_ORIENT_RIGHT_UP|| if the tool orientation is right up ||9, 4, 24
|-
|-
| align="left" |TOOL_ORIENT_RU|| Variable set automatically reporting if the tool orientation is right up ||9, 4, 24
| align="left" |TOOL_ORIENT_RU|| if the tool orientation is right up ||9, 4, 24
|-
|-
| align="left" |TOOL_ORIENT_UL|| Variable set automatically reporting if the tool orientation is up left ||9, 4, 24
| align="left" |TOOL_ORIENT_UL|| if the tool orientation is up left ||9, 4, 24
|-
|-
| align="left" |TOOL_ORIENT_UP_LEFT|| Variable set automatically reporting if the tool orientation is up left ||9, 4, 24
| align="left" |TOOL_ORIENT_UP_LEFT|| if the tool orientation is up left ||9, 4, 24
|-
|-
| align="left" |TOOL_ORIENT_UP_RIGHT|| Variable set automatically reporting if the tool orientation is up right ||9, 4, 24
| align="left" |TOOL_ORIENT_UP_RIGHT|| if the tool orientation is up right ||9, 4, 24
|-
|-
| align="left" |TOOL_ORIENT_UR|| Variable set automatically reporting if the tool orientation is up right ||9, 4, 24
| align="left" |TOOL_ORIENT_UR|| if the tool orientation is up right ||9, 4, 24
|-
|-
| align="left" |TOOL_TYPE_35_DEG ||Variable set automatically reporting if the tool type is 35 degrees || 9, 4, 24
| align="left" |TOOL_TYPE_35_DEG ||if the tool type is 35 degrees || 9, 4, 24
|-
|-
| align="left" |TOOL_TYPE_55_DEG || Variable set automatically reporting if the tool type is 55 degrees  || 9, 4, 24
| align="left" |TOOL_TYPE_55_DEG || if the tool type is 55 degrees  || 9, 4, 24
|-
|-
| align="left" |TOOL_TYPE_55_PARA || Variable set automatically reporting if the tool type is 55 parallel || 9, 4, 24
| align="left" |TOOL_TYPE_55_PARA || if the tool type is 55 parallel || 9, 4, 24
|-
|-
| align="left" |TOOL_TYPE_80_DEG || Variable set automatically reporting if the tool type is 80 degrees || 9, 4, 24
| align="left" |TOOL_TYPE_80_DEG || if the tool type is 80 degrees || 9, 4, 24
|-
|-
| align="left" |TOOL_TYPE_BACK_BORE|| Variable set automatically reporting if the tool type is back bore ||9, 0, 0
| align="left" |TOOL_TYPE_BACK_BORE|| if the tool type is back bore ||9, 0, 0
|-
|-
| align="left" |TOOL_TYPE_BALL_END_MILL|| Variable set automatically reporting if the tool type is a ball end mill ||9, 0, 0
| align="left" |TOOL_TYPE_BALL_END_MILL|| if the tool type is a ball end mill ||9, 0, 0
|-
|-
| align="left" |TOOL_TYPE_BORE|| Variable set automatically reporting if the tool type is bore ||9, 0, 0
| align="left" |TOOL_TYPE_BORE|| if the tool type is bore ||9, 0, 0
|-
|-
| align="left" |TOOL_TYPE_CENTER_DRILL|| Variable set automatically reporting if the tool type is a center drill ||9, 0, 0
| align="left" |TOOL_TYPE_CENTER_DRILL|| if the tool type is a center drill ||9, 0, 0
|-
|-
| align="left" |TOOL_TYPE_COUNTERSINK|| Variable set automatically reporting if the tool type is a countersink ||9, 0, 0
| align="left" |TOOL_TYPE_COUNTERSINK|| if the tool type is a countersink ||9, 0, 0
|-
|-
| align="left" |TOOL_TYPE_CUTOFF || Variable set automatically reporting if the tool type is cutoff || 9, 4, 24
| align="left" |TOOL_TYPE_CUTOFF || if the tool type is cutoff || 9, 4, 24
|-
|-
| align="left" |TOOL_TYPE_DRILL|| Variable set automatically reporting if the tool type is a drill ||9, 0, 0
| align="left" |TOOL_TYPE_DRILL|| if the tool type is a drill ||9, 0, 0
|-
|-
| align="left" |TOOL_TYPE_FACE_CUTTER|| Variable set automatically reporting if the tool type is a face cutter ||9, 0, 0
| align="left" |TOOL_TYPE_FACE_CUTTER|| if the tool type is a face cutter ||9, 0, 0
|-
|-
| align="left" |TOOL_TYPE_FINISH_END_MILL|| Variable set automatically reporting if the tool type is a finish end mill ||9, 0, 0
| align="left" |TOOL_TYPE_FINISH_END_MILL|| if the tool type is a finish end mill ||9, 0, 0
|-
|-
| align="left" |TOOL_TYPE_FLY_CUTTER|| Variable set automatically reporting if the tool type is a fly cutter || 9, 0, 0
| align="left" |TOOL_TYPE_FLY_CUTTER|| if the tool type is a fly cutter || 9, 0, 0
|-
|-
| align="left" |TOOL_TYPE_FORM || Variable set automatically reporting if the tool type is form || 9, 4, 24
| align="left" |TOOL_TYPE_FORM || if the tool type is form || 9, 4, 24
|-
|-
| align="left" |TOOL_TYPE_GROOVE || Variable set automatically reporting if the tool type is groove || 9, 4, 24
| align="left" |TOOL_TYPE_GROOVE || if the tool type is groove || 9, 4, 24
|-
|-
| align="left" |TOOL_TYPE_KEY_CUTTER|| Variable set automatically reporting if the tool type is a key cutter || 9, 0, 0
| align="left" |TOOL_TYPE_KEY_CUTTER|| if the tool type is a key cutter || 9, 0, 0
|-
|-
| align="left" |TOOL_TYPE_PENTAGON || Variable set automatically reporting if the tool type is pentagon ||9, 4, 24
| align="left" |TOOL_TYPE_PENTAGON || if the tool type is pentagon ||9, 4, 24
|-
|-
| align="left" |TOOL_TYPE_REAMER|| Variable set automatically reporting if the tool type is a reamer ||9, 0, 0
| align="left" |TOOL_TYPE_REAMER|| if the tool type is a reamer ||9, 0, 0
|-
|-
| align="left" |TOOL_TYPE_RECTANGLE || Variable set automatically reporting if the tool type is a rectangle || 9, 4, 24
| align="left" |TOOL_TYPE_RECTANGLE || if the tool type is a rectangle || 9, 4, 24
|-
|-
| align="left" |TOOL_TYPE_RIGID_TAP|| Variable set automatically reporting if the tool type is a rigid tap ||9, 0, 0
| align="left" |TOOL_TYPE_RIGID_TAP|| if the tool type is a rigid tap ||9, 0, 0
|-
|-
| align="left" |TOOL_TYPE_ROUGH_END_MILL|| Variable set automatically reporting if the tool type is an end mill || 9, 0, 0
| align="left" |TOOL_TYPE_ROUGH_END_MILL|| if the tool type is an end mill || 9, 0, 0
|-
|-
| align="left" |TOOL_TYPE_ROUND || Variable set automatically reporting if the tool type is a round || 9, 4, 24
| align="left" |TOOL_TYPE_ROUND || if the tool type is a round || 9, 4, 24
|-
|-
| align="left" |TOOL_TYPE_ROUNDOVER|| Variable set automatically reporting if the tool type is a roundover ||9, 0, 0
| align="left" |TOOL_TYPE_ROUNDOVER|| if the tool type is a roundover ||9, 0, 0
|-
|-
| align="left" |TOOL_TYPE_SHELL_CUTTER|| Variable set automatically reporting if the tool type is a shellcutter ||9, 0, 0
| align="left" |TOOL_TYPE_SHELL_CUTTER|| if the tool type is a shellcutter ||9, 0, 0
|-
|-
| align="left" |TOOL_TYPE_SPOT_DRILL|| Variable set automatically reporting if the tool type is a spot drill ||9, 0, 0
| align="left" |TOOL_TYPE_SPOT_DRILL|| if the tool type is a spot drill ||9, 0, 0
|-
|-
| align="left" |TOOL_TYPE_SPOT_FACE|| Variable set automatically reporting if the tool type is a spot face ||9, 0, 0
| align="left" |TOOL_TYPE_SPOT_FACE|| if the tool type is a spot face ||9, 0, 0
|-
|-
| align="left" |TOOL_TYPE_SQUARE || Variable set automatically reporting if the tool type is a square || 9, 4, 24
| align="left" |TOOL_TYPE_SQUARE || if the tool type is a square || 9, 4, 24
|-
|-
| align="left" |TOOL_TYPE_TAP|| Variable set automatically reporting if the tool type is a tap ||9, 0, 0
| align="left" |TOOL_TYPE_TAP|| if the tool type is a tap ||9, 0, 0
|-
|-
| align="left" |TOOL_TYPE_THREAD_MILL|| Variable set automatically reporting if the tool type is a thread mill ||9, 0, 0
| align="left" |TOOL_TYPE_THREAD_MILL|| if the tool type is a thread mill ||9, 0, 0
|-
|-
| align="left" |TOOL_TYPE_THREAD1 || Variable set automatically reporting if the tool type is a thread || 9, 4, 24
| align="left" |TOOL_TYPE_THREAD1 || if the tool type is a thread || 9, 4, 24
|-
|-
| align="left" |TOOL_TYPE_THREAD2 || Variable set automatically reporting if the tool type is a thread || 9, 4, 24
| align="left" |TOOL_TYPE_THREAD2 || if the tool type is a thread || 9, 4, 24
|-
|-
| align="left" |TOOL_TYPE_TRIANGLE || Variable set automatically reporting if the tool type is a triangle || 9, 4, 24
| align="left" |TOOL_TYPE_TRIANGLE || if the tool type is a triangle || 9, 4, 24
|-
|-
| align="left" |TOOL_TYPE_TRIGON || Variable set automatically reporting if the tool type is trigonometrical || 9, 4, 24
| align="left" |TOOL_TYPE_TRIGON || if the tool type is trigonometrical || 9, 4, 24
|-
|-
| align="left" |TOOL_TYPE_UTIL || Variable set automatically reporting if the tool type is utility || 9, 4, 24
| align="left" |TOOL_TYPE_UTIL || if the tool type is utility || 9, 4, 24
|-
|-
| align="left" |TOOL_TYPE_VPROFILE || Variable set automatically reporting if the tool type is vprofile || 9, 0, 0
| align="left" |TOOL_TYPE_VPROFILE || if the tool type is vprofile || 9, 0, 0
|-
|-
| align=“left” |WgNumber || Number of WorkGroup created by the [[NEW_WG]] command ||9, 4, 25
| align=“left” |WgNumber || Number of WorkGroup created by the [[NEW_WG]] command ||9, 4, 25
|-
|-
|}
|}

Revision as of 23:03, 20 August 2010

These variables are set by some of the macro commands by the system Version Number
Button Number of button pressed on macro dialog. ( OK button = zero ) 9, 4, 25
CircleRef Number of circle created by a circle geometry command 9, 4, 25
ContourRef Number of contour created by a contour geometry command 9, 4, 25
CsNumber Number of CS created by the NEW_CS command 9, 4, 25
CURRENT_CS_NUM by the system when a coordinate system is selected or created 9, 0, 0
CURRENT_WG_NUM by the system when a workgroup is selected or created 9, 0, 0
ExcelCellLength by the system when using the EXCEL_FIND_CELL command 9, 4, 25
ExcelError Error code set by all Excel commands 9, 4, 25
EXCEL_IS_OPEN whether or not an excel file is open 9, 0, 0
EXCEL_IS_VISIBLE whether or not an excel file is visible 9, 0, 0
FEAT_TYPE_ARC a feature type 9, 0, 0
FEAT_TYPE_CTOOL a feature type 9, 0, 0
FEAT_TYPE_CURVE a feature type 9, 0, 0
FEAT_TYPE_LINE_IJK a feature type 9, 0, 0
FEAT_TYPE_LINE a feature type 9, 0, 0
FEAT_TYPE_MARKER a feature type 9, 0, 0
FEAT_TYPE_POINT a feature type 9, 0, 0
FEAT_TYPE_RAPID a feature type 9, 0, 0
FEAT_TYPE_SPLINE a feature type 9, 0, 0
FileError Error code set by all file commands 9, 4, 25
GIBBSCAM_VERSION_1 the version of gibbscam running 9, 4, 24
GIBBSCAM_VERSION_2 the version of gibbscam running 9, 4, 24
GIBBSCAM_VERSION_3 the version of gibbscam running 9, 4, 24
GIBBSCAM_WINDOW_X1 the first x position of the gibbscam window 9, 0, 0
GIBBSCAM_WINDOW_X2 the second x position of the gibbscam window 9, 0, 0
GIBBSCAM_WINDOW_Y1 the first y position of the gibbscam window 9, 0, 0
GIBBSCAM_WINDOW_Y2 the second y position of the gibbscam window 9, 0, 0
HoleFrAngle when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrBottom when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrBottomClear when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrBottomZ when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrCS when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrDepth when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrDia when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrDiaTop when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrError Error code set by all HOLEFR commands 9, 4, 25
HoleFrFullDepth when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrMidDepth when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrPosAxisX when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrPosAxisY when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrPosAxisZ when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrPosTopX when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrPosTopY when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrPosTopZ when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrPosX when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrPosY when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrPosZ when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrRef when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrRevCS when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrThroughType when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrtipAngle when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrTop when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrTopClear when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrTopZ when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrType when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrWidth when using the HOLEFR_GET_FEAT command 9, 4, 25
LineRef Number of line created by a line geometry command 9, 4, 25
MTOOL_HOLDER the mill tool holder 9, 0, 0
MTOOL_HOLDER_TYPE the mill tool holder type 9, 4, 24
MTOOL_HOLDER_TYPE_BORE if the mill tool holder is bore 9, 4, 24
MTOOL_HOLDER_TYPE_COLLET if the mill tool holder is a collet 9, 4, 24
MTOOL_HOLDER_TYPE_DRILL if the mill tool holder is a drill 9, 4, 24
MTOOL_HOLDER_TYPE_MILL if the mill tool holder is a mill 9, 4, 24
MTOOL_HOLDER_TYPE_ROT_CLAMP if the mill tool holder is a rotary clamp 9, 4, 24
MTOOL_HOLDER_TYPE_SHELL if the mill tool holder is a shell 9, 4, 24
MTOOL_HOLDER_TYPE_SHRINK_FIT if the mill tool holder is a shrink fit 9, 4, 24
MTOOL_HOLDER_TYPE_TAP if the mill tool holder is a tap 9, 4, 24
MTOOL_HOLDER_TYPE_TG_COLLET if the mill tool holder is a tool group 9, 4, 24
PLUGIN_VERSION_1 the version of plugin running 9, 4, 24
PLUGIN_VERSION_2 the version of plugin running 9, 4, 24
PLUGIN_VERSION_3 the version of plugin running 9, 4, 24
PointRef Number of point created by a point geometry command 9, 4, 25
ReadVarsNumVars Number of variables read using READ_NUM_VARS command 9, 4, 25
SCREEN_HEIGHT the height of the screen 9, 0, 0
SCREEN_WIDTH the height of the screen 9, 0, 0
SolidRef Number of solid created by an EXTRUDE_SHAPE command 9, 4, 25
TOOL_ORIENT_DL if the tool orientation is down left 9, 4, 24
TOOL_ORIENT_DOWN_LEFT if the tool orientation is down left 9, 4, 24
TOOL_ORIENT_DOWN_RIGHT if the tool orientation is down right 9, 4, 24
TOOL_ORIENT_DR if the tool orientation is down right 9, 4, 24
TOOL_ORIENT_LD if the tool orientation is left down 9, 4, 24
TOOL_ORIENT_LEFT_DOWN if the tool orientation is left down 9, 4, 24
TOOL_ORIENT_LEFT_UP if the tool orientation is left up 9, 4, 24
TOOL_ORIENT_LU if the tool orientation is left up 9, 4, 24
TOOL_ORIENT_RD if the tool orientation is right down 9, 4, 24
TOOL_ORIENT_RIGHT_DOWN if the tool orientation is right down 9, 4, 24
TOOL_ORIENT_RIGHT_UP if the tool orientation is right up 9, 4, 24
TOOL_ORIENT_RU if the tool orientation is right up 9, 4, 24
TOOL_ORIENT_UL if the tool orientation is up left 9, 4, 24
TOOL_ORIENT_UP_LEFT if the tool orientation is up left 9, 4, 24
TOOL_ORIENT_UP_RIGHT if the tool orientation is up right 9, 4, 24
TOOL_ORIENT_UR if the tool orientation is up right 9, 4, 24
TOOL_TYPE_35_DEG if the tool type is 35 degrees 9, 4, 24
TOOL_TYPE_55_DEG if the tool type is 55 degrees 9, 4, 24
TOOL_TYPE_55_PARA if the tool type is 55 parallel 9, 4, 24
TOOL_TYPE_80_DEG if the tool type is 80 degrees 9, 4, 24
TOOL_TYPE_BACK_BORE if the tool type is back bore 9, 0, 0
TOOL_TYPE_BALL_END_MILL if the tool type is a ball end mill 9, 0, 0
TOOL_TYPE_BORE if the tool type is bore 9, 0, 0
TOOL_TYPE_CENTER_DRILL if the tool type is a center drill 9, 0, 0
TOOL_TYPE_COUNTERSINK if the tool type is a countersink 9, 0, 0
TOOL_TYPE_CUTOFF if the tool type is cutoff 9, 4, 24
TOOL_TYPE_DRILL if the tool type is a drill 9, 0, 0
TOOL_TYPE_FACE_CUTTER if the tool type is a face cutter 9, 0, 0
TOOL_TYPE_FINISH_END_MILL if the tool type is a finish end mill 9, 0, 0
TOOL_TYPE_FLY_CUTTER if the tool type is a fly cutter 9, 0, 0
TOOL_TYPE_FORM if the tool type is form 9, 4, 24
TOOL_TYPE_GROOVE if the tool type is groove 9, 4, 24
TOOL_TYPE_KEY_CUTTER if the tool type is a key cutter 9, 0, 0
TOOL_TYPE_PENTAGON if the tool type is pentagon 9, 4, 24
TOOL_TYPE_REAMER if the tool type is a reamer 9, 0, 0
TOOL_TYPE_RECTANGLE if the tool type is a rectangle 9, 4, 24
TOOL_TYPE_RIGID_TAP if the tool type is a rigid tap 9, 0, 0
TOOL_TYPE_ROUGH_END_MILL if the tool type is an end mill 9, 0, 0
TOOL_TYPE_ROUND if the tool type is a round 9, 4, 24
TOOL_TYPE_ROUNDOVER if the tool type is a roundover 9, 0, 0
TOOL_TYPE_SHELL_CUTTER if the tool type is a shellcutter 9, 0, 0
TOOL_TYPE_SPOT_DRILL if the tool type is a spot drill 9, 0, 0
TOOL_TYPE_SPOT_FACE if the tool type is a spot face 9, 0, 0
TOOL_TYPE_SQUARE if the tool type is a square 9, 4, 24
TOOL_TYPE_TAP if the tool type is a tap 9, 0, 0
TOOL_TYPE_THREAD_MILL if the tool type is a thread mill 9, 0, 0
TOOL_TYPE_THREAD1 if the tool type is a thread 9, 4, 24
TOOL_TYPE_THREAD2 if the tool type is a thread 9, 4, 24
TOOL_TYPE_TRIANGLE if the tool type is a triangle 9, 4, 24
TOOL_TYPE_TRIGON if the tool type is trigonometrical 9, 4, 24
TOOL_TYPE_UTIL if the tool type is utility 9, 4, 24
TOOL_TYPE_VPROFILE if the tool type is vprofile 9, 0, 0
WgNumber Number of WorkGroup created by the NEW_WG command 9, 4, 25
Retrieved from "https://macros.gibbscam.com/index.php?title=All_Variables&oldid=5437"