SET MARKERS: Difference between revisions

Revision as of 00:21, 15 January 2011

SET_MARKERS <side>, <start feature>, <start dist>, <end feature>, <end dist>, [<dir>, <single feature>]

Set the markers to be used by a contouring process.

<side>: Tool side (0 = center, 1 = left, 2 = right).
<end num>: Start feature (1 = first feature in the shape, 2 = second)
<start dist>: Distance along the start feature (0.0 = start, 1.0 = end).
<end num>: End feature (1 = first feature in the shape, 2 = second)
<start dist>: Distance along the end feature (0.0 = start, 1.0 = end).
[<dir>]: Direction (0 = same direction as the shape, 1 = opposite direction).
[<single feature>]: Single Feature (1 = yes, 0 = no).

SET_MARKERS 1, 3, 0.2, 6, 0.8, 0, 0

For an example macro see Use_Saved_Process

@@ Line 5: / Line 5: @@
 |param1=<side>|param1_desc=Tool side (0 = center, 1 = left, 2 = right).
-|param3=<end num>|param3_desc=Start feature (1 = first feature in the shape, 2 = second)
+|param2=<end num>|param2_desc=Start feature (1 = first feature in the shape, 2 = second)
-|param2=<start dist>|param2_desc=Distance along the start feature (0.0 = start, 1.0 = end).
+|param3=<start dist>|param3_desc=Distance along the start feature (0.0 = start, 1.0 = end).
-|param3=<end num>|param3_desc=End feature (1 = first feature in the shape, 2 = second)
+|param4=<end num>|param4_desc=End feature (1 = first feature in the shape, 2 = second)
-|param2=<start dist>|param2_desc=Distance along the end feature (0.0 = start, 1.0 = end).
+|param5=<start dist>|param5_desc=Distance along the end feature (0.0 = start, 1.0 = end).
-|param5=[<dir>]|param5_desc=Direction (0 = same direction as the shape, 1 = opposite direction).
+|param6=[<dir>]|param6_desc=Direction (0 = same direction as the shape, 1 = opposite direction).
-|param6=[<single feature>]|param6_desc=Single Feature (1 = yes, 0 = no).
+|param7=[<single feature>]|param7_desc=Single Feature (1 = yes, 0 = no).
 }}