All Variables

From Macros Wiki
Jump to: navigation, search
Variable Variable set automatically by the system Version Number
Button Number of button pressed on macro dialog (0 = OK button) 9, 4, 25
CircleRef Reference number of circle created by a circle geometry command 9, 4, 25
ContourRef Reference number of contour created by a contour geometry command 9, 4, 25
CsNumber Number of CS created by the NEW_CS command 9, 4, 25
CURRENT_CS_NUM Current CS number 9, 0, 0
CURRENT_WG_NUM Current WorkGroup number 9, 0, 0
ExcelCellLength Set by the EXCEL_FIND_CELL command 9, 4, 25
ExcelError Error code set by all Excel commands 9, 4, 25
EXCEL_IS_OPEN Is an excel file is open (1 = yes, 0 = no) 9, 0, 0
EXCEL_IS_VISIBLE Is Excel visible (1 = yes, 0 = hidden) 9, 0, 0
FEAT_TYPE_ARC Circular Arc feature type 9, 0, 0
FEAT_TYPE_CTOOL CTool feature type 9, 0, 0
FEAT_TYPE_CURVE Curve (spline) feature type 9, 0, 0
FEAT_TYPE_LINE_IJK Line feature with IJK vector 9, 0, 0
FEAT_TYPE_LINE Line feature type 9, 0, 0
FEAT_TYPE_MARKER CTool feature type 9, 0, 0
FEAT_TYPE_POINT Point feature type 9, 0, 0
FEAT_TYPE_RAPID Rapid Move feature type 9, 0, 0
FEAT_TYPE_SPLINE Curve (spline) feature type 9, 0, 0
FileError Error code set by all file commands 9, 4, 25
GIBBSCAM_LANGUAGE The language of GibbsCAM running 11, 0, 7
GIBBSCAM_VERSION_1 The version of GibbsCAM running 9, 4, 24
GIBBSCAM_VERSION_2 The version of GibbsCAM running 9, 4, 24
GIBBSCAM_VERSION_3 The version of GibbsCAM running 9, 4, 24
GIBBSCAM_WINDOW_X1 First X position (left) of the GibbsCAM window 9, 0, 0
GIBBSCAM_WINDOW_X2 Second X position (right) of the GibbsCAM window 9, 0, 0
GIBBSCAM_WINDOW_Y1 First Y position (top) of the GibbsCAM window 9, 0, 0
GIBBSCAM_WINDOW_Y2 Second X position (bottom) of the GibbsCAM window 9, 0, 0
HoleFrAngle Hole feature data set by the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrBottom Hole feature data set by the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrBottomClear Hole feature data set by the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrBottomZ Hole feature data set by the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrCS Hole feature data set by the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrDepth Hole feature data set by the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrDia Hole feature data set by the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrDiaTop Hole feature data set by the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrError Error code set by HOLEFR commands 9, 4, 25
HoleFrFullDepth Hole feature data set by the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrMidDepth Hole feature data set by the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrPosAxisX Hole feature data set by the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrPosAxisY Hole feature data set by the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrPosAxisZ Hole feature data set by the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrPosTopX Hole feature data set by the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrPosTopY Hole feature data set by the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrPosTopZ Hole feature data set by the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrPosX Hole feature data set by the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrPosY Hole feature data set by the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrPosZ Hole feature data set by the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrRef Hole feature data set by the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrRevCS Hole feature data set by the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrThroughType Hole feature data set by the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrtipAngle Hole feature data set by the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrTop Hole feature data set by the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrTopClear Hole feature data set by the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrTopZ Hole feature data set by the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrType Hole feature data set by the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrWidth Hole feature data set by the HOLEFR_GET_FEAT command 9, 4, 25
LANGUAGE_CHINESE Chinese language 11, 0, 7
LANGUAGE_CZECH Czech language 11, 0, 7
LANGUAGE_ENGLISH English language 11, 0, 7
LANGUAGE_FRENCH French language 11, 0, 7
LANGUAGE_GERMAN German language 11, 0, 7
LANGUAGE_ITALIAN Italian language 11, 0, 7
LANGUAGE_JAPANESE Japanese language 11, 0, 7
LANGUAGE_KOREAN Korean language 11, 0, 7
LANGUAGE_POLISH Polish language 11, 0, 7
LANGUAGE_PORTUGESE Portugese language 11, 0, 7
LANGUAGE_RUSSIAN Russian language 11, 0, 7
LANGUAGE_SPANISH Spanish language 11, 0, 7
LANGUAGE_SWEDISH Swedish language 11, 0, 7
LANGUAGE_TURKISH Turkish language 11, 0, 7
LineRef Reference number of line created by a line geometry command 9, 4, 25
LTOOL_TYPE_80_DEG Lathe Tool type, 80 Degree 11, 0, 4
LTOOL_TYPE_75_DEG Lathe Tool type, 75 Degree 11, 0, 4
LTOOL_TYPE_55_DEG Lathe Tool type, 55 Degree 11, 0, 4
LTOOL_TYPE_35_DEG Lathe Tool type, 35 Degree 11, 0, 4
LTOOL_TYPE_ROUND Lathe Tool type, Round 11, 0, 4
LTOOL_TYPE_SQUARE Lathe Tool type, Square 11, 0, 4
LTOOL_TYPE_TRIANGLE Lathe Tool type, Triangle 11, 0, 4
LTOOL_TYPE_TRIGON Lathe Tool type, Trigon 11, 0, 4
LTOOL_TYPE_PENTAGON Lathe Tool type, Pentagon 11, 0, 4
LTOOL_TYPE_55_PARA Lathe Tool type, 55 Degree Para. 11, 0, 4
LTOOL_TYPE_RECTANGLE Lathe Tool type, Rectangle 11, 0, 4
LTOOL_TYPE_GROOVE Lathe Tool type, Groove 11, 0, 4
LTOOL_TYPE_CUTOFF Lathe Tool type, Cut off 11, 0, 4
LTOOL_TYPE_THREADN Lathe Tool type, Groove Thread 11, 0, 4
LTOOL_TYPE_THREADL Lathe Tool type, Laydown Thread 11, 0, 4
LTOOL_TYPE_VPROFILE Lathe Tool type, V profile 11, 0, 4
LTOOL_TYPE_2DFORM Lathe Tool type, 2D Form 11, 0, 4
LTOOL_TYPE_3DFORM Lathe Tool type, 3D Form 11, 0, 4
LTOOL_TYPE_UTIL Lathe Tool type, Utility 11, 0, 4
MTOOL_TYPE_ROUGH_END_MILL Mill Tool type, Rough End Mill 11, 0, 4
MTOOL_TYPE_FINISH_END_MILL Mill Tool type, Finish End Mill 11, 0, 4
MTOOL_TYPE_BALL_END_MILL Mill Tool type, Ball End Mill 11, 0, 4
MTOOL_TYPE_CONVEX_TIP Mill Tool type, Convex Tip 11, 0, 4
MTOOL_TYPE_LOLLIPOP Mill Tool type, Lollipop 11, 0, 4
MTOOL_TYPE_BARREL Mill Tool type, Barrel 11, 0, 4
MTOOL_TYPE_DOVETAIL Mill Tool type, DoveTail 11, 0, 4
MTOOL_TYPE_SHELL_CUTTER Mill Tool type, Shell Cutter 11, 0, 4
MTOOL_TYPE_FACE_CUTTER Mill Tool type, Face Cutter 11, 0, 4
MTOOL_TYPE_FLY_CUTTER Mill Tool type, Fly Cutter 11, 0, 4
MTOOL_TYPE_KEY_CUTTER Mill Tool type, Key Cutter 11, 0, 4
MTOOL_TYPE_THREAD_HALF_PROF Mill Tool type, Half Prof. Thread 11, 0, 4
MTOOL_TYPE_THREAD_FULL_PROF Mill Tool type, Full Prof. Thread 11, 2, 4
MTOOL_TYPE_DRILL Mill Tool type, Drill 11, 0, 4
MTOOL_TYPE_CENTER_DRILL Mill Tool type, Center Drill 11, 0, 4
MTOOL_TYPE_SPOT_DRILL Mill Tool type, Spot Drill 11, 0, 4
MTOOL_TYPE_BORE Mill Tool type, Bore 11, 0, 4
MTOOL_TYPE_BACK_BORE Mill Tool type, Back Bore 11, 0, 4
MTOOL_TYPE_TAP Mill Tool type, Tap 11, 0, 4
MTOOL_TYPE_RIGID_TAP Mill Tool type, Rigid Tap 11, 0, 4
MTOOL_TYPE_SPOT_FACE Mill Tool type, Spot Face 11, 0, 4
MTOOL_TYPE_REAMER Mill Tool type, Reamer 11, 0, 4
MTOOL_TYPE_COUNTERSINK Mill Tool type, Countersink 11, 0, 4
MTOOL_TYPE_ROUNDOVER Mill Tool type, Roundover 11, 0, 4
MTOOL_TYPE_2DFORM Mill Tool type, 2D Form Tool 11, 0, 4
MTOOL_TYPE_3DFORM Mill Tool type, 3D Form Tool 11, 0, 4
MTOOL_HOLDER_TYPE Mill Tool holder type 9, 4, 24
MTOOL_HOLDER_TYPE_BORE Mill Tool holder type, Bore 9, 4, 24
MTOOL_HOLDER_TYPE_COLLET Mill Tool holder type, Collet 9, 4, 24
MTOOL_HOLDER_TYPE_DRILL Mill Tool holder type, Drill 9, 4, 24
MTOOL_HOLDER_TYPE_MILL Mill Tool holder, Mill 9, 4, 24
MTOOL_HOLDER_TYPE_ROT_CLAMP Mill Tool holder type, Rotary Cclamp 9, 4, 24
MTOOL_HOLDER_TYPE_SHELL Mill Tool holder type, Shell 9, 4, 24
MTOOL_HOLDER_TYPE_SHRINK_FIT Mill Tool holder type, Shrink Fit 9, 4, 24
MTOOL_HOLDER_TYPE_TAP Mill Tool holder type, Tap 9, 4, 24
MTOOL_HOLDER_TYPE_TG_COLLET Mill Tool holder type, Collet - TG 9, 4, 24
PLUGIN_VERSION_1 Version of the Macro Plugin running 9, 4, 24
PLUGIN_VERSION_2 Version of the Macro Plugin running 9, 4, 24
PLUGIN_VERSION_3 Version of the Macro Plugin running 9, 4, 24
PointRef Reference number of point created by a point geometry command 9, 4, 25
ReadVarsNumVars Number of variables read using READ_NUM_VARS command 9, 4, 25
SCREEN_HEIGHT Total height of the screen 9, 0, 0
SCREEN_WIDTH Total width of the screen 9, 0, 0
SolidRef Number of solid created by an EXTRUDE_SHAPE command 9, 4, 25
TOOL_ORIENT_DL Lathe Tool orientation is down left 9, 4, 24
TOOL_ORIENT_DOWN_LEFT Lathe Tool orientation is down left 9, 4, 24
TOOL_ORIENT_DOWN_RIGHT Lathe Tool orientation is down right 9, 4, 24
TOOL_ORIENT_DR Lathe Tool orientation is down right 9, 4, 24
TOOL_ORIENT_LD Lathe Tool orientation is left down 9, 4, 24
TOOL_ORIENT_LEFT_DOWN Lathe Tool orientation is left down 9, 4, 24
TOOL_ORIENT_LEFT_UP Lathe Tool orientation is left up 9, 4, 24
TOOL_ORIENT_LU Lathe Tool orientation is Left Up 9, 4, 24
TOOL_ORIENT_RD Lathe Tool orientation is Right Down 9, 4, 24
TOOL_ORIENT_RIGHT_DOWN Lathe Tool orientation is Right Down 9, 4, 24
TOOL_ORIENT_RIGHT_UP Lathe Tool orientation is Right Up 9, 4, 24
TOOL_ORIENT_RU Lathe Tool orientation is Right Up 9, 4, 24
TOOL_ORIENT_UL Lathe Tool orientation is Up Left 9, 4, 24
TOOL_ORIENT_UP_LEFT Lathe Tool orientation is Up Left 9, 4, 24
TOOL_ORIENT_UP_RIGHT Lathe Tool orientation is Up Right 9, 4, 24
TOOL_ORIENT_UR Lathe Tool orientation is Up Right 9, 4, 24
TOOL_TYPE_35_DEG Lathe Insert Type is 35 Degrees 9, 4, 24
TOOL_TYPE_55_DEG Lathe Insert Type is 55 Degrees 9, 4, 24
TOOL_TYPE_55_PARA Lathe Insert Type is 55 Deg parallelogram 9, 4, 24
TOOL_TYPE_80_DEG Lathe Insert Type is 80 Degrees 9, 4, 24
TOOL_TYPE_BACK_BORE Mill Tool Type is Back Bore 9, 0, 0
TOOL_TYPE_BALL_END_MILL Mill Tool Type is a Ball End Mill 9, 0, 0
TOOL_TYPE_BORE Mill Tool Type is Bore 9, 0, 0
TOOL_TYPE_CENTER_DRILL Mill Tool Type is a Center Drill 9, 0, 0
TOOL_TYPE_COUNTERSINK Mill Tool Type is a Countersink 9, 0, 0
TOOL_TYPE_CUTOFF Lathe Insert Type is Cutoff 9, 4, 24
TOOL_TYPE_DRILL Mill Tool Type is a Drill 9, 0, 0
TOOL_TYPE_FACE_CUTTER Mill Tool Type is a Face Cutter 9, 0, 0
TOOL_TYPE_FINISH_END_MILL Mill Tool Type is a Finish End Mill 9, 0, 0
TOOL_TYPE_FLY_CUTTER Mill Tool Type is a Fly Cutter 9, 0, 0
TOOL_TYPE_FORM Tool Type is a Form Tool 9, 4, 24
TOOL_TYPE_GROOVE Lathe Insert Type is Groove 9, 4, 24
TOOL_TYPE_KEY_CUTTER Mill Tool Type is a Ley Cutter 9, 0, 0
TOOL_TYPE_PENTAGON Lathe Insert Type is Pentagon 9, 4, 24
TOOL_TYPE_REAMER Mill Tool Type is a Reamer 9, 0, 0
TOOL_TYPE_RECTANGLE Lathe Insert Type is a Rectangle 9, 4, 24
TOOL_TYPE_RIGID_TAP Mill Tool Type is a Rigid Tap 9, 0, 0
TOOL_TYPE_ROUGH_END_MILL Mill Tool Type is an Rough End Mill 9, 0, 0
TOOL_TYPE_ROUND Lathe Insert Type is a Round 9, 4, 24
TOOL_TYPE_ROUNDOVER Mill Tool Type is a Roundover 9, 0, 0
TOOL_TYPE_SHELL_CUTTER Mill Tool Type is a Shell Cutter 9, 0, 0
TOOL_TYPE_SPOT_DRILL Mill Tool Type is a Spot Drill 9, 0, 0
TOOL_TYPE_SPOT_FACE Mill Tool Type is a Spot Face 9, 0, 0
TOOL_TYPE_SQUARE Lathe Insert Type is a Square 9, 4, 24
TOOL_TYPE_TAP Mill Tool Type is a Tap 9, 0, 0
TOOL_TYPE_THREAD_MILL Mill Tool Type is a Thread Mill 9, 0, 0
TOOL_TYPE_THREAD1 Lathe Insert Type is a Thread, type 1 9, 4, 24
TOOL_TYPE_THREAD2 Lathe Insert Type is a Thread, type 2 9, 4, 24
TOOL_TYPE_TRIANGLE Lathe Insert Type is a Triangle 9, 4, 24
TOOL_TYPE_TRIGON Lathe Insert Type is Trigonometrical 9, 4, 24
TOOL_TYPE_UTIL Tool Type is Utility 9, 4, 24
TOOL_TYPE_VPROFILE Lathe Insert Type is Vprofile 9, 0, 0
WG_AXIS_X Revolve Around X / Extrude along X 9, 9, 19
WG_AXIS_Y Revolve Around Y / Extrude along Y 9, 9, 19
WG_AXIS_Z Revolve Around Z / Extrude along Z 9, 9, 19
WG_TYPE_PART_GEO Type is Geometry 9, 9, 19
WG_TYPE_PART_STOCK Type is Stock 9, 9, 19
WgNumber Number of WorkGroup created by the NEW_WG command 9, 4, 25
Personal tools
Namespaces
Variants
Actions
Navigation
Toolbox