All Parameters

From Macros Wiki
Jump to: navigation, search
Variable Description Used by Version Number
ABS_MOVES Post output is in absolute SET_POST_DATA 9, 0, 0
ADV_ARC_ENTRY_CRC Advanced entry/exit has CRC checked in radius entry section PROC_DATA 9, 5, 13
ADV_ARC_ENTRY_RAD Advanced entry/exit has radius entry selected PROC_DATA 9, 5, 13
ADV_ARC_EXIT_CRC Advanced entry/exit has CRC checked in radius exit section PROC_DATA 9, 5, 13
ADV_ARC_EXIT_RAD Advanced entry/exit has radius selected in exit section PROC_DATA 9, 5, 13
ADV_LINE_ENTRY_CRC Advanced entry/exit has CRC checked in line entry section PROC_DATA 9, 5, 13
ADV_LINE_EXIT_CRC Advanced entry/exit has CRC checked in line exit section PROC_DATA 9, 5, 13
AFR_BLIND_BOTTOM_ADJUST AFR amount to adjust bottom of blind holes SET_HOLEFR_PARAM 9, 5, 14
AFR_CLEAR_PLANE_TOL AFR clearance plane tolerance SET_HOLEFR_PARAM 9, 5, 14
AFR_CS_MODE AFR CS creation option SET_HOLEFR_PARAM 9, 5, 14
AFR_CS1_ORIGIN AFR CS1 origin option SET_HOLEFR_PARAM 9, 5, 14
AFR_MATCH_MODE AFR match mode SET_HOLEFR_PARAM 9, 5, 14
AFR_SELECT_MODE AFR selection mode SET_HOLEFR_PARAM 9, 5, 14
AFR_THRU_BOTTOM_ADJUST AFR amount to adjust bottom of through holes SET_HOLEFR_PARAM 9, 5, 14
AFR_TOP_CLEAR AFR top clearance amount SET_HOLEFR_PARAM 9, 5, 14
AFR_WG_NAME AFR WorkGroup name; SET_HOLEFR_PARAM 9, 5, 14
ALLOY Material alloy option PART_DATA 9, 0, 0
AUTO_CLEAR_ON Auto clearance is on PART_DATA 9, 0, 0
AUTO_CLEAR_VAL Auto clearance value PART_DATA 9, 0, 0
AUTO_ENTRY_CLEAR_RAD Entry move clear radius OP_DATA - PROC_DATA 9, 0, 0
AUTO_ENTRY_CP Entry clear plane height OP_DATA - PROC_DATA 9, 0, 0
AUTO_EXIT_CLEAR_RAD Exit move clear radius OP_DATA - PROC_DATA 9, 0, 0
AUTO_EXIT_CP Exit clear plane height OP_DATA - PROC_DATA 9, 0, 0
AUTO_REMOVE Auto remove option UTIL_PROC_DATA 9, 0, 0
AXIS_INFO Axis info PROC_DATA 9, 0, 0
BACK_FORTH Back and Forth is checked OP_DATA 9, 0, 0
BOSS_STOCK Boss stock amount OP_DATA - PROC_DATA 9, 0, 0
C_SYNCHED C Synched is checked UTIL_PROC_DATA 9, 0, 0
CHUCK_PART_LEN Chuck part length SET_POST_DATA 9, 0, 0
CHUCK_WIDTH Chuck width SET_POST_DATA 9, 0, 0
CLEAR_DIA Clearance diameter SET_POST_DATA 9, 0, 0
CLEAR_FEED Clearance feedrate OP_DATA - PROC_DATA 9, 0, 0
CLEAR_FEED_LOCK Clearance feed lock is checked OP_DATA - PROC_DATA 9, 0, 0
CLEAR_PERIPH Clear periphery is selected OP_DATA - PROC_DATA 9, 0, 0
CLEAR_RAD Clearance radius PART_DATA - SET_POST_DATA 9, 0, 0
CLEAR_Z Clearance Z value; SET_POST_DATA 9, 0, 0
COMMENT Comment text PART_DATA - TOOL_DATA 9, 0, 0
COMMENT Comment text PROC_DATA - OP_DATA 9, 0, 0
COMMENTS Comments is checked SET_POST_DATA 9, 0, 0
CONTOUR_ENTRY_HELIX_DIA Contour entry helix diameter OP_DATA - PROC_DATA 9, 0, 0
CONTOUR_ENTRY_HELIX_MAX_CUT Contour entry helix maximum cut OP_DATA - PROC_DATA 9, 0, 0
CONTOUR_ENTRY_HELIX_SLOPE Contour entry helix slope OP_DATA - PROC_DATA 9, 0, 0
CONTOUR_ENTRY_HELIX_START_Z Contour entry helix start Z OP_DATA - PROC_DATA 9, 0, 0
CONTOUR_ENTRY_HELIX_TYPE Contour entry helix type OP_DATA - PROC_DATA 9, 0, 0
CONTOUR_ENTRY_RAMP_ANGLE Contour entry ramp angle OP_DATA - PROC_DATA 9, 0, 0
CONTOUR_ENTRY_RAMP_MAX_CUT Contour entry ramp maximum cut OP_DATA - PROC_DATA 9, 0, 0
CONTOUR_ENTRY_RAMP_SLOPE Contour entry ramp slope OP_DATA - PROC_DATA 9, 0, 0
CONTOUR_ENTRY_RAMP_START_Z Contour entry ramp start Z OP_DATA - PROC_DATA 9, 0, 0
CONTOUR_ENTRY_RAMP_TYPE Contour entry ramp type OP_DATA - PROC_DATA 9, 0, 0
CONTOUR_FEED Contour feedrate OP_DATA - PROC_DATA 9, 0, 0
CONTROL_POINT Control point (Tooltip) UTIL_PROC_DATA 9, 0, 0
COOLANT Coolant type OP_DATA - PROC_DATA 9, 0, 0
CP1 CP1 value PART_DATA - OP_DATA - PROC_DATA 9, 0, 0
CRC CRC state PROC_DATA 9, 0, 0
CRC_DIR CRC direction OP_DATA 9, 0, 0
CRC_OFFSET CRC offset number OP_DATA - PROC_DATA 9, 0, 0
CRC_SIDE CRC side OP_DATA 9, 0, 0
CS CS number UTIL_PROC_DATA 9, 0, 0
CS_NUM CS number OP_DATA - PROC_DATA 9, 0, 0
CSS Constant surface speed value OP_DATA 9, 0, 0
CURVE_CUT_DIR Curve cut direction PROC_DATA 9, 0, 0
CURVE_TOL Curve tolerance PROC_DATA 9, 0, 0
CURVE_TOLERANCE Curver tolerance OP_DATA 9, 0, 0
CUSTOM_CBSET Custom CBSET PROC_DATA 9, 3, 9
CUT_ANGLE Cut angle OP_DATA - PROC_DATA 9, 0, 0
CUT_BACK Cut back amount OP_DATA - PROC_DATA 9, 0, 0
CUT_SIDE Cut side OP_DATA - PROC_DATA 9, 0, 0
CUT_TOL Cut tolerance OP_DATA 9, 0, 0
CUT_TYPE Cut type OP_DATA - PROC_DATA 9, 0, 0
CUT_WIDTH Cut width OP_DATA - PROC_DATA 9, 0, 0
DEPTH Depth OP_DATA 9, 0, 0
DEPTH_FIRST Cut depth first OP_DATA - PROC_DATA 9, 0, 0
DRAFT_ANGLE Draft angle TOOL_DATA 9, 0, 0
DRILL_BORE_APPROACH_ANGLE Drill bore approach angle OP_DATA - PROC_DATA 9, 0, 0
DRILL_BORE_CLEAR_AMOUNT Drill bore clear amount OP_DATA - PROC_DATA 9, 0, 0
DRILL_BORE_CLEAR_DIA Drill bore clear diameter OP_DATA - PROC_DATA 9, 0, 0
DRILL_BORE_CUT_DIA Drill bore cut diameter OP_DATA - PROC_DATA 9, 0, 0
DRILL_BORE_CUT_WIDTH Drill bore cut width OP_DATA - PROC_DATA 9, 0, 0
DRILL_BORE_DESIRED_STEP Drill bore desired step OP_DATA - PROC_DATA 9, 0, 0
DRILL_BORE_ENTRY_EXIT_LINE Drill bore entry and exit line length OP_DATA - PROC_DATA 9, 0, 0
DRILL_BORE_ENTRY_EXIT_RAD Drill bore entry and exit radius OP_DATA - PROC_DATA 9, 0, 0
DRILL_BORE_OVERLAP Drill bore overlap amount OP_DATA - PROC_DATA 9, 0, 0
DRILL_BORE_PULLOFF Drill bore pulloff amount OP_DATA - PROC_DATA 9, 0, 0
DRILL_BORE_STOCK Drill bore stock amount OP_DATA - PROC_DATA 9, 0, 0
DRILL_CB_END_RIZ Drill cycle end RIZ OP_DATA 9, 0, 0
DRILL_CB_START_RIZ Drill cycle start RIZ OP_DATA 9, 0, 0
DRILL_CLEAR_PLANE Drill clearance plane height OP_DATA - PROC_DATA 9, 0, 0
DRILL_CLEAR_PLANE_LOC_CS Use local CS OP_DATA 9, 0, 0
DRILL_DWELL Drill cycle dwell amount OP_DATA - PROC_DATA 9, 0, 0
DRILL_FEED Drill feedrate PROC_DATA 9, 0, 0
DRILL_PECK_AMOUNT Drill peck depth OP_DATA - PROC_DATA 9, 0, 0
DRILL_PECK_CLEARANCE Drill peck clearance OP_DATA - PROC_DATA 9, 0, 0
DRILL_PECK_RETRACT Drill peck retract amount OP_DATA - PROC_DATA 9, 0, 0
DRILL_POS_APPROACH Use positive approach OP_DATA - PROC_DATA 9, 0, 0
DRILL_TAP_PERCENT Tap percentage OP_DATA - PROC_DATA 9, 0, 0
DRILL_TYPE Drill cycle type OP_DATA - PROC_DATA 9, 0, 0
ENTRY_CLEAR Entry clearance value OP_DATA - PROC_DATA 9, 0, 0
ENTRY_FEED Entry feedrate OP_DATA - PROC_DATA 9, 0, 0
ENTRY_LINE Use entry line OP_DATA - PROC_DATA 9, 0, 0
ENTRY_LINE_LEN Entry line length OP_DATA - PROC_DATA 9, 0, 0
ENTRY_PERP Entry is perpendicular OP_DATA - PROC_DATA 9, 0, 0
ENTRY_RAD Entry arc radius OP_DATA - PROC_DATA 9, 0, 0
ENTRY_TYPE Entry move type OP_DATA - PROC_DATA 9, 0, 0
EXIT_CLEAR Exit clearance value OP_DATA - PROC_DATA 9, 0, 0
EXIT_LINE Use exit line OP_DATA - PROC_DATA 9, 0, 0
EXIT_LINE_LEN Exit line length OP_DATA - PROC_DATA 9, 0, 0
EXIT_PERP Exit is perpendicular OP_DATA - PROC_DATA 9, 0, 0
EXIT_RAD Exit arc radius OP_DATA - PROC_DATA 9, 0, 0
FAMILY Material family PART_DATA 9, 0, 0
FEED_CONNECT Use feed connect. Toggles "Retracts" flag (inverse sense). OP_DATA - PROC_DATA 9, 0, 0
FEED_DISTANCE Feed distance UTIL_PROC_DATA 9, 0, 0
FEEDRATE Feedrate UTIL_PROC_DATA 9, 0, 0
FLOW Flow number OP_DATA 9, 0, 0
FLOW_NUM Flow number UTIL_PROC_DATA 9, 0, 0
FM_BACK_AND_FORTH Back and Forth setting PROC_DATA 9, 3, 9
FM_BEFORE_ZIGZAG Before zigzag option PROC_DATA 9, 3, 9
FM_CLEAR Clearance option OP_DATA - PROC_DATA 9, 0, 0
FM_CUT_WIDTH Cut width OP_DATA - PROC_DATA 9, 0, 0
FM_HPLUS Cut in Horizontal plus direction OP_DATA - PROC_DATA 9, 0, 0
FM_MOVEH Move horizontal OP_DATA - PROC_DATA 9, 0, 0
FM_TYPE Type OP_DATA - PROC_DATA 9, 0, 0
FM_USE_SHAPE Use shape OP_DATA - PROC_DATA 9, 0, 0
FM_VPLUS Cut in vertical plus direction OP_DATA - PROC_DATA 9, 0, 0
FORM_SHAPE_REF Shape reference number used for form tool TOOL_DATA 9, 5, 13
FORWARD Forward option UTIL_PROC_DATA 9, 0, 0
FROM_WORKPIECE Dimensions from workpiece UTIL_PROC_DATA 9, 0, 0
FULL_DIA Full diameter value OP_DATA - PROC_DATA 9, 0, 0
FULL_RETURN Full return option UTIL_PROC_DATA 9, 0, 0
GEO_RAD Geometry radius OP_DATA - PROC_DATA 9, 0, 0
GRAPHIC_PART_DIST_ON Graphic part distance on is checked PART_DATA 9, 0, 0
GRAPHIC_PART_DIST_VAL Graphic part distance value PART_DATA 9, 0, 0
GRIP_Z Grip Z value UTIL_PROC_DATA 9, 0, 0
GROUP_ANG_TOL Angular tolerance SET_HOLEFR_PARAM 9, 5, 14
GROUP_KEEP Keep in group SET_HOLEFR_PARAM 9, 5, 14
GROUP_LIN_TOL Linear tolerance value SET_HOLEFR_PARAM 9, 5, 14
GROUP_MODE Group mode SET_HOLEFR_PARAM 9, 5, 14
GROUP_SAME_BOTTOM_Z Group same bottom Z together SET_HOLEFR_PARAM 9, 5, 14
GROUP_SAME_CS Group same CS together SET_HOLEFR_PARAM 9, 5, 14
GROUP_SAME_DIA Group same diameter together SET_HOLEFR_PARAM 9, 5, 14
GROUP_SAME_MID_Z Group same mid Z together SET_HOLEFR_PARAM 9, 5, 14
GROUP_SAME_TOP_Z Group same top Z together SET_HOLEFR_PARAM 9, 5, 14
GROUP_SAME_TYPE Group same hole type together SET_HOLEFR_PARAM 9, 5, 14
HARDNESS Hardness value PART_DATA 9, 0, 0
HIT_FLATS Hit flats option OP_DATA - PROC_DATA 9, 0, 0
HIT_PARALLEL Hit parallel option OP_DATA - PROC_DATA 9, 0, 0
HOLDER_SHAPE_REF Reference number of shape used for tool holder TOOL_DATA 9, 0, 0
HOLDER_SOLID_REF Reference number of solid used for tool holder TOOL_DATA 9, 0, 0
ID Tool ID option TOOL_DATA 9, 0, 0
IGNORE_TOOLS Ignore tools option OP_DATA - PROC_DATA 9, 0, 0
INITIAL_FACE_Z Initial face Z value UTIL_PROC_DATA 9, 0, 0
INTER_OP_OVERRIDE Interop override option OP_DATA 9, 0, 0
INTER_PART_FULL_UP Inter part full up option SET_POST_DATA 9, 0, 0
INTERSECT_CLEANUP_FROM Cleanup from option OP_DATA 9, 0, 0
INTERSECT_CUTS_TYPE Cut type OP_DATA 9, 0, 0
INTERSECT_PASS_TYPE Pass type OP_DATA 9, 0, 0
INTERSECT_PASSES_PER_SIDE Number of passes per side OP_DATA 9, 0, 0
INTERSECT_TYPE Type OP_DATA 9, 0, 0
LATHE_CANNED_AUTOFIN Auto finish option OP_DATA 9, 0, 0
LATHE_CLEAR_ID Clear ID value PROC_DATA 9, 0, 0
LATHE_CUT_DIR Cut direction OP_DATA 9, 0, 0
LATHE_CUT_OFF Cut off value OP_DATA 9, 0, 0
LATHE_CUT_OTHER_SIDE Cut other side option OP_DATA - PROC_DATA 9, 0, 0
LATHE_CUT_WIDTH Cut width OP_DATA 9, 0, 0
LATHE_DEPTH Depth of cut OP_DATA 9, 0, 0
LATHE_MAX_RPM Maximum RPM OP_DATA 9, 0, 0
LATHE_NO_DRAG No drag option OP_DATA 9, 0, 0
LATHE_OD_ID_FACE OD ID Face setting (OD=0, ID=1, Front Face=3, Back Face [MTM]=4) OP_DATA 9, 0, 0
LATHE_PAT_SHIFT_FIXED_SRT Pattern shift fixed option OP_DATA 9, 0, 0
LATHE_PAT_SHIFT_PASSES Pattern shift number of passes OP_DATA 9, 0, 0
LATHE_PATTERN_SHIFT_CUT_X Pattern shift cut amount in X OP_DATA 9, 0, 0
LATHE_PATTERN_SHIFT_CUT_Z Pattern shift cut amount in Z OP_DATA 9, 0, 0
LATHE_PATTERN_SHIFT_PT_X Pattern shift point in X OP_DATA 9, 0, 0
LATHE_PATTERN_SHIFT_PT_Z Pattern shift point in Z OP_DATA 9, 0, 0
LATHE_PLUNGE_CENTER_OUT Plunge from center outwards OP_DATA 9, 0, 0
LATHE_PLUNGE_CUT_TYPE Plunge cut type OP_DATA 9, 0, 0
LATHE_PLUNGE_ENTRY_TYPE Plunge entry type OP_DATA 9, 0, 0
LATHE_PLUNGE_TYPE Plunge type OP_DATA 9, 0, 0
LATHE_PREFER_CANNED Prefer canned option OP_DATA - PROC_DATA 9, 0, 0
LATHE_PULL_OFF_WALL Pulloff wall value OP_DATA 9, 0, 0
LATHE_ROUGH_TYPE Rough cycle type OP_DATA 9, 0, 0
LATHE_SQUARE_CORNERS Square corners option OP_DATA 9, 0, 0
LATHE_SURFACE_Z Surface z value OP_DATA 9, 0, 0
LATHE_TYPE Lathe Process type PROC_DATA 9, 0, 0
LATHE_TYPE Lathe Operation type OP_DATA 9, 0, 0
LATHE_USE_AUTO_CLEAR Use auto clearance PROC_DATA 9, 4, 12
LATHE_XZ_STOCK Use XZ stock OP_DATA 9, 0, 0
LDRILL_CLEARANCE Lathe drill clearance value PROC_DATA 9, 0, 0
LDRILL_DWELL Lathe drill dwell amount PROC_DATA 9, 0, 0
LDRILL_ENTRY Lathe drill entry type PROC_DATA 9, 3, 9
LDRILL_FEED Lathe drill feed value PROC_DATA 9, 0, 0
LDRILL_PECK Lathe drill peck value PROC_DATA 9, 0, 0
LDRILL_RETRACT Lathe drill retract amount PROC_DATA 9, 0, 0
LDRILL_SURFACE_Z Lathe drill surface Z value PROC_DATA 9, 0, 0
LDRILL_TAP_PERCENT Lathe drill tap percentage PROC_DATA 9, 0, 0
LDRILL_TIP_Z Lathe drill Tip Z position PROC_DATA 9, 0, 0
LEN_OFFSET Length offset number OP_DATA - PROC_DATA 9, 0, 0
LENGTH Length OP_DATA 9, 0, 0
LLTOOL_THICK Lathe tool thickness TOOL_DATA 9, 0, 0
LOCATION Location value UTIL_PROC_DATA 9, 0, 0
LOCKS Locks setting OP_DATA 9, 0, 0
LPLUNGE_ANGLE Lathe plunge angle OP_DATA 9, 0, 0
LPLUNGE_FEED_PERCENT Lathe plunge feed percentage OP_DATA 9, 0, 0
LPLUNGE_MAX_CUT Lathe plunge maximum cut OP_DATA 9, 0, 0
LPLUNGE_PECK_AMOUNT Lathe plunge peck amount OP_DATA 9, 0, 0
LPLUNGE_PECK_CLEARANCE Lathe plunge peck clearance OP_DATA 9, 0, 0
LPLUNGE_PECK_RETRACT Lathe plunge peck retract amount OP_DATA 9, 0, 0
LROUGH_AUTO_FINISH Lathe rough auto finish option PROC_DATA 9, 0, 0
LROUGH_AUTO_FINISH_FEED Lathe rough auto finish feedrate PROC_DATA 9, 3, 9
LROUGH_AUTOFIN Lathe rough auto finish option OP_DATA 9, 0, 0
LROUGH_AVOID_AIR Lathe rough avoid air option PROC_DATA 9, 0, 0
LROUGH_BACK_AND_FORTH Lathe rough back and forth setting PROC_DATA 9, 5, 13
LROUGH_CENTER_OUT Lathe rough from center out PROC_DATA 9, 0, 0
LROUGH_CLEANUP_PASS Lathe rough use cleanup pass PROC_DATA 9, 0, 0
LROUGH_CLEARANCE Lathe rough clearance value PROC_DATA 9, 3, 9
LROUGH_CONSTANT_PATH Lathe rough constant path option OP_DATA - PROC_DATA 9, 0, 0
LROUGH_CONSTANT_STEP Lathe rough constant step option PROC_DATA 9, 0, 0
LROUGH_CONTOUR_FEED Lathe rough conmtour feedrate PROC_DATA 9, 3, 9
LROUGH_CSS Lathe rough constant surface speed value PROC_DATA 9, 0, 0
LROUGH_CUT_DIR Lathe rough cut direction PROC_DATA 9, 0, 0
LROUGH_CUT_OFF Lathe rough cut off value PROC_DATA 9, 0, 0
LROUGH_CUT_WIDTH Lathe rough cut width PROC_DATA - OP_DATA 9, 0, 0
LROUGH_CUT_X Lathe rough cut in X direction PROC_DATA 9, 0, 0
LROUGH_CUT_Z Lathe rough cut in Z direction PROC_DATA 9, 0, 0
LROUGH_CYCLE_SP_X Lathe rough cycle start point X value PROC_DATA 9, 5, 13
LROUGH_CYCLE_SP_Z Lathe rough cycle start point Z value PROC_DATA 9, 5, 13
LROUGH_DEFLECT_COMP_VAL Lathe rough deflection compensation value PROC_DATA 9, 4, 12
LROUGH_DIR_FWD Lathe rough direction forward PROC_DATA 9, 5, 13
LROUGH_ENTRY_FEED Lathe rough entry feedrate PROC_DATA 9, 3, 9
LROUGH_ENTRY_LINE Lathe rough entry line option OP_DATA - PROC_DATA 9, 0, 0
LROUGH_ENTRY_PERP Lathe rough entry perpendicular option PROC_DATA 9, 0, 0
LROUGH_ENTRY_RAD Lathe rough entry arc radius OP_DATA - PROC_DATA 9, 0, 0
LROUGH_EXIT_LINE Lathe rough exit line option OP_DATA - PROC_DATA 9, 0, 0
LROUGH_EXIT_PERP Lathe rough exit perpendicular option OP_DATA - PROC_DATA 9, 0, 0
LROUGH_EXIT_RAD Lathe rough exit arc radius OP_DATA - PROC_DATA 9, 0, 0
LROUGH_FEED Lathe rough feedrate PROC_DATA 9, 3, 9
LROUGH_FEED_PERCENT Lathe rough feed percentage PROC_DATA 9, 0, 0
LROUGH_FINISH_LAST Lathe rough finish last PROC_DATA 9, 0, 0
LROUGH_FIXED_SP Lathe rough uses fixed start point PROC_DATA 9, 0, 0
LROUGH_MAX_RPM Lathe rough maximum spindle speed PROC_DATA 9, 3, 9
LROUGH_MIN_RAD Lathe rough minimum radius OP_DATA - PROC_DATA 9, 0, 0
LROUGH_MONOTONIC Lathe rough is monotonic PROC_DATA 9, 0, 0
LROUGH_MULTI_PASS Lathe rough uses multiple passes PROC_DATA 9, 4, 12
LROUGH_NUM_PASSES Lathe rough number of passes PROC_DATA 9, 0, 0
LROUGH_OFFSET_CUT_DEPTH Lathe rough offset cycle cut depth PROC_DATA 9, 5, 13
LROUGH_PECK Lathe rough uses pecking PROC_DATA 9, 0, 0
LROUGH_PECK_VAL Lathe rough peck value PROC_DATA 9, 0, 0
LROUGH_PLUNGE_ANGLE Lathe rough plunge angle PROC_DATA 9, 0, 0
LROUGH_PLUNGE_FIRST Lathe rough plunge first PROC_DATA 9, 5, 13
LROUGH_PLUNGE_TYPE Lathe rough plunge type OP_DATA - PROC_DATA 9, 0, 0
LROUGH_RAMP_ANGLE Lathe rough ramp angle OP_DATA - PROC_DATA 9, 0, 0
LROUGH_RAPID_STEP Lathe rough rapid step value PROC_DATA 9, 0, 0
LROUGH_RETRACT Lathe rough retract option PROC_DATA 9, 0, 0
LROUGH_ROUGH_START Lathe rough start option PROC_DATA 9, 3, 9
LROUGH_ROUGH_TYPE Lathe rough cycle type PROC_DATA 9, 0, 0
LROUGH_ROUND_CORNERS Lathe rough round corners option OP_DATA - PROC_DATA 9, 0, 0
LROUGH_SFPM Lathe rough surface speed PROC_DATA 9, 3, 9
LROUGH_SHIFT_CUT_WIDTH Lathe rough shift cut width PROC_DATA 9, 0, 0
LROUGH_SHIFT_SQUARE_CORNERS Lathe rough shift square corners PROC_DATA 9, 5, 13
LROUGH_SPINDLE_DIR Lathe rough spindle direction OP_DATA - PROC_DATA 9, 0, 0
LROUGH_START Lathe rough start option OP_DATA 9, 0, 0
LROUGH_START_SIDE_EXT Lathe rough start side extension amount PROC_DATA 9, 5, 13
LROUGH_STOCK Lathe rough stock value PROC_DATA 9, 3, 9
LROUGH_STOCK_X Lathe rough X stock value PROC_DATA 9, 3, 9
LROUGH_STOCK_Z Lathe rough Z stock value PROC_DATA 9, 3, 9
LROUGH_TURN_CUT_WIDTH Lathe rough turn cut width PROC_DATA 9, 0, 0
LROUGH_USE_DEFLECT_COMP Lathe rough uses deflection compensation PROC_DATA 9, 4, 12
LROUGH_XMINUS Lathe rough cuts in X minus direction OP_DATA - PROC_DATA 9, 0, 0
LROUGH_XPLUS Lathe rough cuts in X plus direction OP_DATA - PROC_DATA 9, 0, 0
LROUGH_ZMINUS Lathe rough cuts in Z minus direction OP_DATA - PROC_DATA 9, 0, 0
LROUGH_ZPLUS Lathe rough cuts in Z plus direction OP_DATA - PROC_DATA 9, 0, 0
LTHREAD_ALTERNATE Lathe thread alternate cut option OP_DATA - PROC_DATA 9, 0, 0
LTHREAD_ANGLE Lathe thread angle OP_DATA 9, 0, 0
LTHREAD_ANGLE_ALT Lathe thread alternate angle OP_DATA 9, 0, 0
LTHREAD_BALANCED Lathe thread balance option OP_DATA 9, 0, 0
LTHREAD_BALANCED_IN_FEED Lathe thread balanced in feed amount PROC_DATA 9, 3, 9
LTHREAD_CSS Lathe thread surface speed value PROC_DATA 9, 3, 9
LTHREAD_CUT_DEPTH Lathe thread cut depth PROC_DATA 9, 0, 0
LTHREAD_CUT_DIR Lathe thread cut direction PROC_DATA 9, 3, 9
LTHREAD_CUT_TYPE Lathe thread cut type (1=one finish pass, 2=constant cut, 3=constant load) PROC_DATA 9, 3, 9
LTHREAD_FIRST_CUT Lathe thread first cut option OP_DATA 9, 0, 0
LTHREAD_HEIGHT_XR Lathe thread height as a radial value OP_DATA 9, 0, 0
LTHREAD_LAST_CUT Lathe thread last cut option OP_DATA - PROC_DATA 9, 0, 0
LTHREAD_MAJOR_DIA Lathe thread major diameter OP_DATA - PROC_DATA 9, 0, 0
LTHREAD_MAX_RPM Lathe thread maximum spindle speed PROC_DATA 9, 0, 0
LTHREAD_MINOR_DIA Lathe thread minor diameter PROC_DATA 9, 0, 0
LTHREAD_MINOR_XD Lathe thread minor diameter OP_DATA 9, 0, 0
LTHREAD_NOM_PITCH_INDEX Lathe thread nominal pitch index OP_DATA 9, 0, 0
LTHREAD_NOMINAL Lathe thread nominal value OP_DATA 9, 0, 0
LTHREAD_NOMINAL_PITCH_INDEX Lathe thread nominal pitch index PROC_DATA 9, 3, 9
LTHREAD_NOMINAL_XD Lathe thread nominal diameter PROC_DATA 9, 0, 0
LTHREAD_NUM_SPRING_PASSES Lathe thread number of spring passes PROC_DATA 9, 3, 9
LTHREAD_NUM_STARTS Lathe thread number of starts PROC_DATA 9, 3, 9
LTHREAD_PITCH Lathe thread pitch OP_DATA - PROC_DATA 9, 0, 0
LTHREAD_RUN_IN Lathe thread run in amount OP_DATA 9, 0, 0
LTHREAD_RUN_OUT Lathe thread run out amount OP_DATA 9, 0, 0
LTHREAD_SFPM Lathe thread surface speed value PROC_DATA 9, 0, 0
LTHREAD_SLOPE Lathe thread slope value OP_DATA 9, 0, 0
LTHREAD_STARTS Lathe thread number of starts OP_DATA 9, 0, 0
LTHREAD_STYPE Lathe thread type OP_DATA - PROC_DATA 9, 0, 0
LTHREAD_TAPER Lathe thread taper value PROC_DATA 9, 0, 0
LTHREAD_TAPER_INDEX Lathe thread taper index PROC_DATA 9, 3, 9
LTHREAD_THREAD_ANGLE Lathe thread thread angle PROC_DATA 9, 0, 0
LTHREAD_THREAD_HEIGHT Lathe thread thread height PROC_DATA 9, 0, 0
LTHREAD_TPI Lathe thread number of TPI OP_DATA 9, 0, 0
LTHREAD_TYPE Lathe thread type OP_DATA 9, 0, 0
LTHREAD_X_END_EXTEND Lathe thread X end extension PROC_DATA 9, 0, 0
LTHREAD_X_START_EXTEND Lathe thread X start extension PROC_DATA 9, 0, 0
LTHREAD_Z_END Lathe thread Z end position OP_DATA - PROC_DATA 9, 0, 0
LTHREAD_Z_END_EXTEND Lathe thread Z end extension PROC_DATA 9, 0, 0
LTHREAD_Z_START Lathe thread Z start position OP_DATA - PROC_DATA 9, 0, 0
LTHREAD_Z_START_EXTEND Lathe thread Z start extension PROC_DATA 9, 0, 0
LTOOL_B_AXIS Lathe tool B axis angle TOOL_DATA 9, 0, 0
LTOOL_CUT_SIDE Lathe tool cut side TOOL_DATA 9, 0, 0
LTOOL_DIA_RELIEF Lathe tool diameter relief TOOL_DATA 9, 0, 0
LTOOL_FACE_ANGLE Lathe tool face angle TOOL_DATA 9, 0, 0
LTOOL_FACE_RELIEF face relief TOOL_DATA 9, 0, 0
LTOOL_FACE_UP Lathe tool face up option TOOL_DATA 9, 0, 0
LTOOL_HOLDER Lathe tool holder type TOOL_DATA 9, 0, 0
LTOOL_HOLDER_THICKNESS Lathe tool holder thickness TOOL_DATA 9, 0, 0
LTOOL_INSERT_ANGLE Lathe tool insert angle TOOL_DATA 9, 0, 0
LTOOL_ISIZE Lathe tool insert size TOOL_DATA 9, 0, 0
LTOOL_LENGTH Lathe tool length TOOL_DATA 9, 0, 0
LTOOL_MID_ANGLE Lathe tool mid angle TOOL_DATA 9, 0, 0
LTOOL_OFFSET Lathe tool offset number TOOL_DATA 9, 0, 0
LTOOL_ORIENTATION Lathe tool orientation TOOL_DATA 9, 0, 0
LTOOL_OTHER Lathe tool other data TOOL_DATA 9, 0, 0
LTOOL_PRESET_PT_X Lathe tool preset point in X TOOL_DATA 9, 0, 0
LTOOL_PRESET_PT_Z Lathe tool preset point in Z TOOL_DATA 9, 0, 0
LTOOL_SIDE_ANGLE Lathe tool side angle TOOL_DATA 9, 0, 0
LTOOL_SIZE Lathe tool size TOOL_DATA 9, 0, 0
LTOOL_THREAD_DIR Lathe thread tool direction TOOL_DATA 9, 0, 0
LTOOL_THREAD_EDGE_POS_X Lathe thread tool edge position in X TOOL_DATA 9, 0, 0
LTOOL_THREAD_EDGE_POS_Z Lathe thread tool edge position in Z TOOL_DATA 9, 0, 0
LTOOL_THREAD_FLAT_LEN Lathe thread tool flat length TOOL_DATA 9, 0, 0
LTOOL_THREAD_ID_OD Lathe thread tool ID or OD setting TOOL_DATA 9, 0, 0
LTOOL_THREAD_INSERT_WIDTH Lathe thread tool insert width TOOL_DATA 9, 0, 0
LTOOL_THREAD_PITCH Lathe thread tool pitch TOOL_DATA 9, 0, 0
LTOOL_THREAD_STYLE Lathe thread tool style TOOL_DATA 9, 0, 0
LTOOL_THREAD_TYPE Lathe thread tool type TOOL_DATA 9, 0, 0
LTOOL_TIP_ANGLE Lathe tool tip angle TOOL_DATA 9, 0, 0
LTOOL_TIP_CENTER_TO_PRESET_X Lathe tool tip center to preset pt dist in X TOOL_DATA 9, 0, 0
LTOOL_TIP_CENTER_TO_PRESET_Z Lathe tool tip center to preset pt dist in Z TOOL_DATA 9, 0, 0
LTOOL_TIP_OFFSET Lathe tool tip offset TOOL_DATA 9, 0, 0
LTOOL_TIP_RAD Lathe tool tip radius TOOL_DATA 9, 0, 0
LTOOL_TIP_WIDTH Lathe tool tip width TOOL_DATA 9, 0, 0
LTOOL_TURRET_SHIFT_X Lathe tool turret shift in X TOOL_DATA 9, 0, 0
LTOOL_TURRET_SHIFT_Z Lathe tool turret shift in Z TOOL_DATA 9, 0, 0
LTOOL_TYPE Lathe tool type TOOL_DATA 9, 0, 0
LTOOL_UTIL_ANGLE Lathe utility tool angle TOOL_DATA 9, 0, 0
LTOOL_UTIL_DIA Lathe utility tool diameter TOOL_DATA 9, 0, 0
LTOOL_UTIL_LEN Lathe utility tool length TOOL_DATA 9, 0, 0
LTOOL_WIDTH Lathe tool width TOOL_DATA 9, 0, 0
M_USE_ADV_TOL Use advanced tolerance OP_DATA - PROC_DATA 9, 0, 0
M_ZSHIFT Z shift value OP_DATA 9, 0, 0
MACH_ENGINE Machining engine OP_DATA 9, 0, 0
MACH_FLOWS Number of flows PART_DATA 9, 0, 0
MACHINE_MODE Machine mode UTIL_PROC_DATA 9, 0, 0
MATERIAL Material type TOOL_DATA 9, 0, 0
MATERIAL_ONLY Use material only option OP_DATA - PROC_DATA 9, 0, 0
MATERIAL_ONLY_CLEARANCE Material only clearance OP_DATA 9, 0, 0
MD_FROM_TOOL Multi-depth from tool OP_DATA - PROC_DATA 9, 0, 0
MD_PROCESS_LOAD_H1Z_FEAT Multi-depth H1 feature value PROC_DATA 9, 3, 9
MD_RETRACT_LEVEL Multi-depth retract level OP_DATA - PROC_DATA 9, 0, 0
MD_VARY_WITH_FEAT Multi-depth vary with feature OP_DATA - PROC_DATA 9, 0, 0
MD_VARY_WITH_GEO Multi-depth vary with geometry OP_DATA - PROC_DATA 9, 0, 0
MDD_FILE MDD filename PART_DATA 9, 0, 0
MDD_NAME MDD name PART_DATA 9, 0, 0
METRIC_OUTPUT Uses metric output SET_POST_DATA 9, 0, 0
MFIXTURE_TOL Mill fixture tolerance OP_DATA - PROC_DATA 9, 0, 0
MILL_TYPE Mill process type PROC_DATA 9, 0, 0
MILL_TYPE Mill operation type OP_DATA 9, 0, 0
MIN_CUT Minimum cut OP_DATA - PROC_DATA 9, 0, 0
MIN_RAD Minimum radius OP_DATA - PROC_DATA 9, 0, 0
MINIMIZE Minimize block numbers SET_POST_DATA 9, 0, 0
MSTOCK_TOL Stock tolerance PROC_DATA 9, 0, 0
MSURF_CLEAR Surface clearance OP_DATA - PROC_DATA 9, 0, 0
MSURF_STOCK_TOL Surface stock tolerance OP_DATA 9, 0, 0
MSURFACE_CLEAR Surface clearance PROC_DATA 9, 0, 0
MTHREAD_CLEAR_DIA Thread mill clear diameter OP_DATA - PROC_DATA 9, 0, 0
MTHREAD_CUT_DIA Thread mill cut diameter OP_DATA - PROC_DATA 9, 0, 0
MTHREAD_END_THREAD Thread mill end thread value OP_DATA - PROC_DATA 9, 0, 0
MTHREAD_FEED Thread mill feedrate OP_DATA - PROC_DATA 9, 0, 0
MTHREAD_ID_OD Thread mill ID or OD option OP_DATA - PROC_DATA 9, 0, 0
MTHREAD_PITCH Thread mill pitch OP_DATA - PROC_DATA 9, 0, 0
MTHREAD_RAPID_IN Thread mill rapid in option PROC_DATA 9, 0, 0
MTHREAD_START_THREAD Thread mill start thread OP_DATA - PROC_DATA 9, 0, 0
MTHREAD_THREAD_DIR Thread mill thread direction OP_DATA - PROC_DATA 9, 0, 0
MTHREAD_TRAVERSE_CP1 Thread mill traverse at CP1 OP_DATA - PROC_DATA 9, 0, 0
MTOOL_BOTTOM_RAD Mill tool bottom radius TOOL_DATA 9, 0, 0
MTOOL_CORNER_RAD Mill tool corner radius TOOL_DATA 9, 0, 0
MTOOL_FLUTE_LENGTH Mill tool flute length TOOL_DATA 9, 0, 0
MTOOL_INNER_TOP_CORNER_RAD Mill tool inner top corner radius TOOL_DATA 9, 0, 0
MTOOL_LEAD_TIP Mill tool lead tip value TOOL_DATA 9, 0, 0
MTOOL_LEN_OFFSET Mill tool length offset number TOOL_DATA 9, 0, 0
MTOOL_LENGTH Mill tool length TOOL_DATA 9, 0, 0
MTOOL_NON_CUT_DIA Non cutting diameter TOOL_DATA 9, 0, 0
MTOOL_NUM_FLUTES Mill tool number of flutes TOOL_DATA 9, 0, 0
MTOOL_OPTIONS Mill tool options is checked TOOL_DATA 9, 0, 0
MTOOL_ORIENTATION Mill tool orientation TOOL_DATA 9, 0, 0
MTOOL_OUT_OF_HOLDER_LEN Mill tool out of holder length TOOL_DATA 9, 4, 24
MTOOL_PITCH_TPI Mill tool pitch TOOL_DATA 9, 0, 0
MTOOL_PRESET_X Mill tool preset point in X TOOL_DATA 9, 0, 0
MTOOL_PRESET_Y Mill tool preset point in X TOOL_DATA 9, 0, 0
MTOOL_PRESET_Z Mill tool preset point in Z TOOL_DATA 9, 0, 0
MTOOL_RADIUS Mill tool radius TOOL_DATA 9, 0, 0
MTOOL_SHANK_RAD Mill tool shank radius TOOL_DATA 9, 0, 0
MTOOL_TC_SHIFT_X Mill tool TC shift in X TOOL_DATA 9, 0, 0
MTOOL_TC_SHIFT_Y Mill tool TC shift in Y TOOL_DATA 9, 0, 0
MTOOL_TC_SHIFT_Z Mill tool TC shift in Z TOOL_DATA 9, 0, 0
MTOOL_TIP_ANGLE Mill tool tip angle TOOL_DATA 9, 0, 0
MTOOL_TIP_RAD Mill tool tip radius TOOL_DATA 9, 0, 0
MTOOL_TOP_CORNER_RAD Mill tool top corner radius TOOL_DATA 9, 0, 0
MTOOL_TOP_RAD Mill tool top radius TOOL_DATA 9, 0, 0
MTOOL_TYPE Mill tool type TOOL_DATA 9, 0, 0
MZSHIFT Z shift amount PROC_DATA 9, 0, 0
NUM_FLOWS Total number of flows PART_DATA 9, 0, 0
NUM_PARTS Total number of parts SET_POST_DATA 9, 0, 0
NUM_REPEATS Number of repeats OP_DATA 9, 0, 0
NUM_SPINDLES Total number of spindles PART_DATA 9, 0, 0
NUM_SPRING_PASSES Number of spring passes OP_DATA 9, 0, 0
NUM_TOOL_GROUPS Total number of tool groups PART_DATA 9, 0, 0
OD_ID_FACE OD ID Face setting OP_DATA 9, 0, 0
OFFSET Offset number TOOL_DATA 9, 0, 0
ONE_PART_ALL_TOOLS One part all tools option SET_POST_DATA 9, 0, 0
OP_END Op end text OP_DATA 9, 0, 0
OP_START Op start text OP_DATA 9, 0, 0
OP_STOPS Optional stops setting SET_POST_DATA 9, 0, 0
OPEN_CLEARANCE Open clearance value OP_DATA - PROC_DATA 9, 0, 0
ORIENTATION Orientation UTIL_PROC_DATA 9, 0, 0
OUTPUT_FILE Output filename SET_POST_DATA 9, 0, 0
OVERHANG Overhang amount OP_DATA - PROC_DATA 9, 0, 0
OVERLAP Overlap amount OP_DATA - PROC_DATA 9, 0, 0
PART_FILE Part filename PART_DATA 9, 0, 0
PART_IN_MAIN Part is in main spindle UTIL_PROC_DATA 9, 0, 0
PART_IN_SUB Part is in sub spindle UTIL_PROC_DATA 9, 0, 0
PART_NAME Part name PART_DATA 9, 0, 0
PART_SPACING_X Part spacing in X SET_POST_DATA 9, 0, 0
PART_SPACING_Y Part spacing in Y SET_POST_DATA 9, 0, 0
PART_SPACING_Z Part spacing in Z SET_POST_DATA 9, 0, 0
PAST_STOCK Past stock amount OP_DATA - PROC_DATA 9, 0, 0
PATH_CS Toolpath CS number OP_DATA - PROC_DATA 9, 0, 0
PATTERN_INDEX Pattern index OP_DATA - PROC_DATA 9, 3, 9
PATTERN_ON Pattern on setting OP_DATA - PROC_DATA 9, 3, 9
POCKET_ENTRY_HELIX_ANGLE Pocket entry helix angle OP_DATA - PROC_DATA 9, 0, 0
POCKET_ENTRY_HELIX_CP_X Pocket entry helix X center OP_DATA - PROC_DATA 9, 0, 0
POCKET_ENTRY_HELIX_CP_Y Pocket entry helix Y center OP_DATA - PROC_DATA 9, 0, 0
POCKET_ENTRY_HELIX_DIA Pocket entry helix diameter OP_DATA - PROC_DATA 9, 0, 0
POCKET_ENTRY_HELIX_MAX_CUT Pocket entry maximum cut OP_DATA - PROC_DATA 9, 0, 0
POCKET_ENTRY_HELIX_SLOPE Pocket entry slope OP_DATA - PROC_DATA 9, 0, 0
POCKET_ENTRY_HELIX_START_Z Pocket entry start Z OP_DATA - PROC_DATA 9, 0, 0
POCKET_ENTRY_HELIX_TYPE Pocket entry helix type OP_DATA - PROC_DATA 9, 0, 0
POCKET_ENTRY_HELIX_WALL_CLEAR Pocket entry wall clearance OP_DATA - PROC_DATA 9, 0, 0
POCKET_ENTRY_PERIPH_SLOPE Pocket entry periphery slope OP_DATA - PROC_DATA 9, 0, 0
POCKET_ENTRY_PERIPH_START_Z Pocket entry periphery start Z position OP_DATA - PROC_DATA 9, 0, 0
POCKET_ENTRY_PLUNGE_PT_X Pocket entry plunge point in X PROC_DATA 9, 0, 0
POCKET_ENTRY_PLUNGE_PT_Y Pocket entry plunge point in Y PROC_DATA 9, 0, 0
POCKET_ENTRY_RAMP Pocket entry uses ramp OP_DATA 9, 0, 0
POCKET_ENTRY_RAMP_ANGLE Pocket entry ramp angle OP_DATA - PROC_DATA 9, 0, 0
POCKET_ENTRY_RAMP_MAX_CUT Pocket entry ramp maximum cut OP_DATA 9, 0, 0
POCKET_ENTRY_RAMP_SLOPE Pocket entry ramp slope OP_DATA - PROC_DATA 9, 0, 0
POCKET_ENTRY_RAMP_START_Z Pocket entry ramp start Z position OP_DATA - PROC_DATA 9, 0, 0
POCKET_ENTRY_RAMP_TYPE Pocket entry ramp type PROC_DATA 9, 3, 9
POCKET_ENTRY_RAMP_WALL_CLEAR Pocket entry ramp wall clearance OP_DATA - PROC_DATA 9, 0, 0
POCKET_TYPE Pocket type OP_DATA - PROC_DATA 9, 0, 0
POST_FILE Post filename SET_POST_DATA 9, 0, 0
PREF_FOOTER_CHARS Footer in characters preference SET_POST_DATA 9, 0, 0
PREF_FOOTER_FEET Footer in feet preference SET_POST_DATA 9, 0, 0
PREF_FOOTER_METERS Footer in meters preference SET_POST_DATA 9, 0, 0
PREF_FOOTER_METRES Footer in metres preference SET_POST_DATA 9, 0, 0
PREF_HEADER_ABS_INC Header ABS INC preference SET_POST_DATA 9, 0, 0
PREF_HEADER_DATE_TIME header time preference SET_POST_DATA 9, 0, 0
PREF_HEADER_FORMAT_CODE Header format code preference SET_POST_DATA 9, 0, 0
PREF_HEADER_FORMAT_NAME Header format name preference SET_POST_DATA 9, 0, 0
PREF_HEADER_NUM_PARTS Header number of parts preference SET_POST_DATA 9, 0, 0
PREF_HEADER_PROG_COMMENT Header progam comment preference SET_POST_DATA 9, 0, 0
PREF_HEADER_PROG_NAME header pogram name preference SET_POST_DATA 9, 0, 0
PREF_HEADER_SPECIAL Header special data preference SET_POST_DATA 9, 0, 0
PREF_HEADER_START_TOOL Header start tool preference SET_POST_DATA 9, 0, 0
PREF_OP_OP_COMMENT Op comment option SET_POST_DATA 9, 0, 0
PREF_OP_OPNUM_TYPE Op number type option SET_POST_DATA 9, 0, 0
PREF_OP_TOOL_COMMENT Tool comment option SET_POST_DATA 9, 0, 0
PREF_OP_TOOLNUM_TYPE Tool number type option SET_POST_DATA 9, 0, 0
PREF_OP_WG_COMMENT WorkgGroup comment option SET_POST_DATA 9, 0, 0
PREF_SUB Prefer subs setting SET_POST_DATA 9, 0, 0
PREFER_SUBS Prefer subs setting PROC_DATA -OP_DATA 9, 3, 9
PRIME_SPINDLE Prime spindle number TOOL_DATA 9, 0, 0
PROC_GROUP Process group number OP_DATA 9, 0, 0
PROC_ID Process ID number OP_DATA 9, 0, 0
PROC_OP Process operation number OP_DATA 9, 0, 0
PROG_STOP Program stop option OP_DATA - PROC_DATA 9, 3, 9
PULLBACK Pullback amount UTIL_PROC_DATA 9, 0, 0
RADIUS Part radius PART_DATA 9, 0, 0
RAPID_CLEARANCE Rapid clearance OP_DATA - PROC_DATA 9, 0, 0
RAPID_IN Rapid in OP_DATA - PROC_DATA 9, 3, 9
REPEATS Use repeats PROC_DATA 9, 0, 0
RETRACTS Controls Zig Zag Roughing "No Retracts" flag (inverse sense) OP_DATA - PROC_DATA 9, 3, 9
ROUND_CORNERS Round corners option OP_DATA - PROC_DATA 9, 3, 9
RPM Spindle speed OP_DATA - PROC_DATA 9, 0, 0
S_USE_ADV_TOL Use advanced tolerance OP_DATA - PROC_DATA 9, 3, 9
SAME_STROKE Same stroke option OP_DATA - PROC_DATA 9, 3, 9
SCALLOP_FEED Scallop feed amount OP_DATA - PROC_DATA 9, 0, 0
SCALLOP_FEED_LOCK Scallop feed lock OP_DATA - PROC_DATA 9, 3, 9
SELECTED_OPS Post selected oerations SET_POST_DATA 9, 0, 0
SEQ_BY Block seq by value SET_POST_DATA 9, 0, 0
SEQ_FROM Block seq from value SET_POST_DATA 9, 0, 0
SFLOCUT_TYPE Surface flow cut type OP_DATA 9, 0, 0
SFLOW_MACH_DIR Surface flow machining direction OP_DATA 9, 0, 0
SFLOW_MACH_ZORDER Surface flow machining Z order OP_DATA 9, 0, 0
SFLOW_TRAVEL_AROUND_MODE Surface flow travel around mode OP_DATA 9, 0, 0
SHIFT_DISTANCE Shift distance UTIL_PROC_DATA 9, 0, 0
SPIN_CONTROL Spindle control option OP_DATA 9, 0, 0
SPINDLE_DIR Spindle direction TOOL_DATA 9, 0, 0
SPINDLE_NUM Spindle number UTIL_PROC_DATA 9, 0, 0
SPINDLE_ON Spindle is on UTIL_PROC_DATA 9, 0, 0
SPINDLE_SPEED Spindle speed UTIL_PROC_DATA 9, 0, 0
SPINDLE_UNLOADED Spindle is unloaded UTIL_PROC_DATA 9, 0, 0
SPINDLE_USED Spindle is used SET_POST_DATA 9, 0, 0
START_ON_RIGHT Start on right OP_DATA - PROC_DATA 9, 0, 0
START_PROG_NUM Start program number SET_POST_DATA 9, 0, 0
STAY_CLEAR Stay clear option OP_DATA - PROC_DATA 9, 3, 9
STEP Step value OP_DATA 9, 0, 0
STEPOVER_FEED Stepover feed value OP_DATA - PROC_DATA 9, 0, 0
STEPOVER_FEED_LOCK Stepover feed lock OP_DATA - PROC_DATA 9, 3, 9
STOCK Stock amount OP_DATA - PROC_DATA 9, 3, 9
STOCK_DIA Stock diameter SET_POST_DATA 9, 0, 0
STOCK_RAD Stock radius PART_DATA - SET_POST_DATA 9, 0, 0
STOCK_X1 Stock X1 position PART_DATA 9, 0, 0
STOCK_X2 Stock X2 position PART_DATA 9, 0, 0
STOCK_Y1 Stock Y1 position PART_DATA 9, 0, 0
STOCK_Y2 Stock Y2 position PART_DATA 9, 0, 0
STOCK_Z1 Stock X1 position PART_DATA - POST_DATA 9, 0, 0
STOCK_Z2 Stock Z2 position PART_DATA - POST_DATA 9, 0, 0
SUB_IN_UNLOAD Sub spindle in unload UTIL_PROC_DATA 9, 0, 0
SURF_STOCK Surface stock OP_DATA 9, 0, 0
SURF_Z Surface Z value PROC_DATA 9, 3, 9
SURFACE_ARC_FIT_TOL Surface arc fit tolerance OP_DATA - PROC_DATA 9, 0, 0
SURFACE_BACK_AND_FORTH Surface back and forth option PROC_DATA 9, 0, 0
SURFACE_BACK_FORTH Surface back and forth option OP_DATA 9, 0, 0
SURFACE_CFEED Surface contour feedrate PROC_DATA 9, 3, 9
SURFACE_CLEANUP_TYPE Surface cleanup type PROC_DATA 9, 4, 12
SURFACE_CLEAR_STOCK Surface clear stock amount OP_DATA - PROC_DATA 9, 0, 0
SURFACE_CLEAR_STOCK_TYPE Surface clear stock type OP_DATA - PROC_DATA 9, 0, 0
SURFACE_CONST_FACES_CLEAR Surface constant faces clear value PROC_DATA 9, 3, 9
SURFACE_CONSTRAIN Surface constraint amount OP_DATA - PROC_DATA 9, 0, 0
SURFACE_CONSTRAINT_FACES_CLEAR Surface constraint faces clear option OP_DATA 9, 0, 0
SURFACE_CONSTRAINT_TOL Surface constraint tolerance OP_DATA - PROC_DATA 9, 0, 0
SURFACE_CORNER_RAD Surface corner radius OP_DATA - PROC_DATA 9, 0, 0
SURFACE_CURVE_CUT_DIR Surface curve cut direction OP_DATA 9, 0, 0
SURFACE_CUT_ANGLE Surface cut angle OP_DATA - PROC_DATA 9, 0, 0
SURFACE_CUT_OPT Surface cut option OP_DATA - PROC_DATA 9, 0, 0
SURFACE_CUT_OVER_EDGES Surface cut over edges OP_DATA - PROC_DATA 9, 0, 0
SURFACE_CUT_TOL Surface cut tolerance PROC_DATA 9, 3, 9
SURFACE_CUT_TYPE Surface cut type OP_DATA - PROC_DATA 9, 0, 0
SURFACE_CUTS_TYPE Surface cuts type PROC_DATA 9, 0, 0
SURFACE_DEPTH Surface depth of cut OP_DATA 9, 0, 0
SURFACE_DESIRED_Z Surface desired Z depth OP_DATA - PROC_DATA 9, 0, 0
SURFACE_EFEED Surface entry feedrate PROC_DATA 9, 3, 9
SURFACE_ENTRY_PLUNGE_PT_X Surface entry plunge point in X OP_DATA - PROC_DATA 9, 0, 0
SURFACE_ENTRY_PLUNGE_PT_Y Surface entry plunge point in Y OP_DATA - PROC_DATA 9, 0, 0
SURFACE_ENTRY_RAMP_TYPE Surface entry ramp type OP_DATA - PROC_DATA 9, 3, 9
SURFACE_ENTRY_TYPE Surface entry type OP_DATA - PROC_DATA 9, 3, 9
SURFACE_FIXTURE_CLEAR Surface fixture clearance PROC_DATA 9, 3, 9
SURFACE_FIXTURE_TOL Surface fixture tolerance OP_DATA - PROC_DATA 9, 0, 0
SURFACE_FLOW_CUT_TYPE Surface flow cut direction PROC_DATA 9, 0, 0
SURFACE_FLOW_MACH_DIR Surface flow machining direction PROC_DATA 9, 0, 0
SURFACE_FLOW_MACH_Z_ORDER Surface flow machining Z order PROC_DATA 9, 0, 0
SURFACE_FLOW_TRAVEL_AROUND_MODE Surface flow travel around mode PROC_DATA 9, 0, 0
SURFACE_INTERSECT_TYPE Surface intersection type PROC_DATA 9, 0, 0
SURFACE_LACE_CUT_DIR Surface lace cut direction PROC_DATA - OP_DATA 9, 0, 0
SURFACE_MAX_CUT_ANGLE Surface maximum cut angle OP_DATA - PROC_DATA 9, 3, 9
SURFACE_NORMAL_ANGLE Surface normal angle OP_DATA - PROC_DATA 9, 0, 0
SURFACE_OFFSET_SURFACES Surface offset surfaces option PROC_DATA 9, 0, 0
SURFACE_OFFSET_SURFS Surface offset surfaces option OP_DATA 9, 0, 0
SURFACE_ONE_PASS Surface one pass option OP_DATA - PROC_DATA 9, 0, 0
SURFACE_OUTPUT_PREF Surface output preference OP_DATA - PROC_DATA 9, 0, 0
SURFACE_PASSES_PER_SIDE Surface number of passes per side PROC_DATA 9, 0, 0
SURFACE_PASSES_TYPE Surface pass type PROC_DATA 9, 0, 0
SURFACE_RETRACT_OPT Surface retract option OP_DATA 9, 0, 0
SURFACE_RETRACT_OPTION Surface retract option PROC_DATA 9, 0, 0
SURFACE_RIDGE_HEIGHT Surface ridge height PROC_DATA - OP_DATA 9, 3, 9
SURFACE_SKIP_FLATS Surface skip flats option OP_DATA - PROC_DATA 9, 0, 0
SURFACE_SMOOTH_TOL Surface smoothing tolerance OP_DATA - PROC_DATA 9, 0, 0
SURFACE_SPLINE_APPROX_TOL Surface spline approximation tolerance PROC_DATA 9, 3, 9
SURFACE_SPLINE_TOL Surface spline tolerance OP_DATA 9, 0, 0
SURFACE_STAY_IN_STOCK Surface stay in stock option OP_DATA - PROC_DATA 9, 0, 0
SURFACE_STEP_CUT_RATIO Surface stepover cut ration PROC_DATA -OP_DATA 9, 3, 9
SURFACE_STEP_OVER Surface stepover OP_DATA 9, 0, 0
SURFACE_STEPOVER Surface stepover PROC_DATA 9, 3, 9
SURFACE_STOCK Surface stock amount OP_DATA - PROC_DATA 9, 0, 0
SURFACE_STOCK_TOL Surface stock tolerance OP_DATA - PROC_DATA 9, 0, 0
SURFACE_TYPE Surface type OP_DATA - PROC_DATA 9, 0, 0
SURFACE_Z Surface Z value PROC_DATA 9, 3, 9
SURFACE_DEPTH Surface depth OP_DATA 9, 0, 0
TG_COUNT Total number of ToolGroups PART_DATA 9, 0, 0
TIME Time OP_DATA - PROC_DATA 9, 0, 0
TIP_Z Tip Z position PROC_DATA 9, 3, 9
TO_WORKPIECE To workpiece option UTIL_PROC_DATA 9, 0, 0
TOOL_CHANGE Toolchange option PROC_DATA 9, 0, 0
TOOL_CHANGE_X Toolchange position in X PART_DATA - GET_TG_DATA 9, 0, 0
TOOL_CHANGE_Y Toolchange position in Y PART_DATA - GET_TG_DATA 9, 0, 0
TOOL_CHANGE_Z Toolchange position in Z PART_DATA - GET_TG_DATA 9, 0, 0
TOOL_GROUP ToolGroup number OP_DATA - PROC_DATA 9, 0, 0
TOOL_GROUP_POS ToolGroup position TOOL_DATA 9, 0, 0
TOOL_NEG_SIDE Negative side option TOOL_DATA 9, 0, 0
TOOL_NUM Tool number OP_DATA - PROC_DATA 9, 0, 0
TOOLGROUP ToolGroup number TOOL_DATA 9, 0, 0
TORQUE_SENSING Torque sensing option UTIL_PROC_DATA 9, 0, 0
TORQUE_VAL Torque value UTIL_PROC_DATA 9, 0, 0
TYPE Tool type TOOL_DATA 9, 0, 0
TYPE Operation type OP_DATA 9, 0, 0
TYPE Process type PROC_DATA 9, 0, 0
TYPE Part type PART_DATA 9, 0, 0
UNITS Part units PART_DATA 9, 0, 0
USE_ID Tool uses ID TOOL_DATA 9, 0, 0
UTIL_TYPE Utility type OP_DATA 9, 0, 0
WALL_ANG Wall angle OP_DATA 9, 0, 0
WALL_ANGLE Wall angle PROC_DATA 9, 0, 0
WALL_BOT Wall bottom value OP_DATA 9, 0, 0
WALL_BOTTOM Wall bottom value PROC_DATA 9, 0, 0
WALL_DCEP_SIDE Wall DCEP side value OP_DATA 9, 0, 0
WALL_IANG Internal wall angle OP_DATA 9, 0, 0
WALL_IBOT Internal wall bottom OP_DATA 9, 0, 0
WALL_ITOP Internal wall top OP_DATA 9, 0, 0
WALL_MODE Wall mode OP_DATA - PROC_DATA 9, 0, 0
WALL_RIDGE_HEIGHT Wall ridge height OP_DATA - PROC_DATA 9, 0, 0
WALL_SAME_DCEP_SIDE Wall same side DCEP PROC_DATA 9, 3, 9
WALL_SAME_DIR Wall same direction option OP_DATA - PROC_DATA 9, 0, 0
WALL_SHAPE_STEP Wall uses shape step OP_DATA - PROC_DATA 9, 0, 0
WALL_STEP Wall step amount OP_DATA - PROC_DATA 9, 0, 0
WALL_SWEPT_ISLAND Wall uses swept islands OP_DATA - PROC_DATA 9, 0, 0
WALL_SWEPT_POCKET Wall uses swept pockets OP_DATA - PROC_DATA 9, 0, 0
WALL_TOP Wall top OP_DATA - PROC_DATA 9, 0, 0
WALL_TOP_TO_BOTTOM Wall cut from top to bottom OP_DATA - PROC_DATA 9, 3, 9
WALL_USER_STEP Wall user step amount OP_DATA - PROC_DATA 9, 0, 0
WALLI_ANGLE Internal wall angle PROC_DATA 9, 0, 0
WALLI_BOTTOM Internal wall bottom PROC_DATA 9, 0, 0
WALLI_TOP Internal wall top PROC_DATA 9, 0, 0
WG_NUM WorkGroup number OP_DATA 9, 0, 0
WORK_FIXTURES Use work fixtures SET_POST_DATA 9, 0, 0
WORKPIECE Workpiece number OP_DATA 9, 0, 0
WP_COUNT Workpiece count PART_DATA 9, 0, 0
WRAP Wrap option OP_DATA - PROC_DATA 9, 3, 9
WRAP_COPY_ANGLE Wrap duplication angle PROC_DATA 9, 0, 0
WRAP_DUP_ANGLE Wrap duplication angle OP_DATA 9, 0, 0
WRAP_DUPS Wrap number of duplications OP_DATA 9, 0, 0
WRAP_NUM_COPIES Wrap number of duplications PROC_DATA 9, 3, 9
WRAP_START_ANGLE Wrap start angle OP_DATA - PROC_DATA 9, 0, 0
X_CLEARANCE X clearance value UTIL_PROC_DATA 9, 0, 0
X_DROP X drop value UTIL_PROC_DATA 9, 0, 0
X_HOME X home option UTIL_PROC_DATA 9, 0, 0
X_POSITION X position value UTIL_PROC_DATA 9, 0, 0
X_VALUE X value UTIL_PROC_DATA 9, 0, 0
Z_CLEARANCE Z clearance value UTIL_PROC_DATA 9, 0, 0
Z_DROP Z drop value UTIL_PROC_DATA 9, 0, 0
Z_HOME Z home option UTIL_PROC_DATA 9, 0, 0
Z_POSITION Z postition UTIL_PROC_DATA 9, 0, 0
Z_STEP Actual Z stepover OP_DATA - PROC_DATA 9, 0, 0
Z_STEP_WANTED Z stepover desired OP_DATA - PROC_DATA 9, 3, 9
Z_VALUE Z value UTIL_PROC_DATA 9, 0, 0
ZIG_ZAG Zigzag option OP_DATA 9, 0, 0
Personal tools
Namespaces
Variants
Actions
Navigation
Toolbox